ShenZhen Yuejiang Technology Dobot Magician Manual de usuario

User Guide

Shenzhen Yuejiang Technology Co., Ltd

Dobot Magician

User Guide

Issue: V1.9.0

Date: 2020-07-23

Dobot Magician User Guide

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Yuejiang Technology Co., Ltd

Disclaimer

To the maximum extent permitted by applicable law, the products described (including its

hardware, software and firmware, etc.) in this document are provided AS IS, which may have flaws,

errors or faults. Yuejiang makes no warranties of any kind, express or implied, including but not

limited to, merchantability, satisfaction of quality, fitness for a particular purpose and non-

infringement of third party rights. In no event will Yuejiang be liable for any special, incidental,

consequential or indirect damages resulting from the use of our products and documents.

Before using our product, please thoroughly read and understand the contents of this document

and related technical documents that are published online, to ensure that the robotic arm is used on

the premise of fully understanding the robotic arm and related knowledge. Please use this document

with technical guidance from professionals. Even if follow this document or any other related

instructions, Damages or losses will be happen in the using process, Dobot shall not be considered

as a guarantee regarding to all security information contained in this document.

The user has the responsibility to make sure following the relevant practical laws and

regulations of the country, in order that there is no significant danger in the use of the robotic arm.

Shenzhen Yuejiang Technology Co., Ltd

Address: 3F, Building NO.3, Tongfuyu Industrial Town, Nanshan District, Shenzhen, China

Website: www.dobot.cc

Dobot Magician User Guide Preface

Preface

Purpose

This Document describes the functions, technical specifications, installation guide and system

commissioning of Dobot Magician, making it easy for users to fully understand and use it.

IntendedAudience

This document is intended for:

Customer Engineer

Sales Engineer

Installation and Commissioning Engineer

Technical Support Engineer

Change History

Date

Change Description

2020/07/22

Delete Sliding chapter

Update pictures based on V2 Dobot Magician

2018/09/11

Update the connection figure between Dobot Magician and sliding rail

2018/06/12

The first release

Symbol Conventions

The symbols that may be founded in this document are defined as follows.

Symbol

Description

DANGER

Indicates a hazard with a high level of risk which, if not

avoided, could result in death or serious injury

WARNING

Indicates a hazard with a medium level or low level of

risk which, if not avoided, could result in minor or

moderate injury, robotic arm damage

NOTICE

Indicates a potentially hazardous situation which, if not

avoided, can result in robotic arm damage, data loss, or

unanticipated result

NOTE

Provides additional information to emphasize or

supplement important points in the main text

Dobot Magician User Guide Contents

iii

Contents

Security Precautions................................................................................................1

1.1 General Security................................................................................................................1

Precautions........................................................................................................................2

Quick Start ...............................................................................................................4

Connecting Cables to the Dobot Magician.......................................................................4

Installing the DobotStudio................................................................................................5

System Requirements..........................................................................................5

Obtaining the DobotStudio Package....................................................................5

Installing the DobotStudio...................................................................................5

Verifying the Installation.....................................................................................7

Powering On/Off the Dobot Magician............................................................................10

Getting Started................................................................................................................11

Introduction............................................................................................................18

Overview.........................................................................................................................18

Appearance and Constitute .............................................................................................18

Working Principle...........................................................................................................18

Workspace .........................................................................................................18

Coordinate System.............................................................................................20

Motion Function................................................................................................21

Technical Specifications .................................................................................................23

Technical Parameters.........................................................................................23

Sizes...................................................................................................................24

Interface Description .............................................................................................26

Interface Board ...............................................................................................................26

LED Indicator .................................................................................................................28

Multiplexed I/O Interface Description............................................................................28

Multiplexed Base I/O Interface Description......................................................28

Multiplexed Forearm I/O Interface Description................................................30

Operation................................................................................................................31

Introduction to the DobotStudio .....................................................................................31

Function Modules..............................................................................................31

Common Areas of DobotStudio Page................................................................33

Performing Teaching & Playback Tasks.........................................................................35

Installing a Suction Cup Kit ..............................................................................35

Installing a Gripper Kit......................................................................................36

Teaching & Playback Page................................................................................38

ARC Motion Mode............................................................................................41

Teaching & Playback Example..........................................................................43

Working in Offline Mode................................................................................................48

Writing and Drawing ......................................................................................................49

Installing a Writing and drawing kit..................................................................49

Connecting the DobotStudio .............................................................................50

Dobot Magician User Guide Contents

Importing Image Files and Setting Writing Parameters.....................................53

Adjust the Position of the Pen Nib ....................................................................57

Performing Laser Engraving Tasks.................................................................................60

Installing a Laser Kit .........................................................................................60

Connecting the DobotStudio .............................................................................61

Importing Image Files and Setting Engraving Parameters................................64

Adjust the Laser Focus and Start to Grave........................................................68

Engraving a Grayscale Image.........................................................................................72

Installing a Grayscale-engraving Kit.................................................................73

Connecting the DobotStudio .............................................................................73

Importing Image Files and Setting Engraving Parameters................................75

Adjust the Laser Focus and Start to Engrave.....................................................78

Controlling with your Hand Gesture...............................................................................83

Installing a Leap Motion Controller..................................................................83

Leap Motion Demo............................................................................................84

Controlling with your Mouse..........................................................................................86

Operating 3D Printing.....................................................................................................90

Installing 3D Printing Kit ..................................................................................91

Operating Repetier Host....................................................................................95

Operating Cura ................................................................................................110

Calibration ....................................................................................................................116

Base Calibration ..............................................................................................116

Sensor Calibration...........................................................................................120

Homing............................................................................................................130

Connecting with WIFI Kit ............................................................................................131

Connecting with Bluetooth Kit.....................................................................................134

Operating Blockly.........................................................................................................135

Scripting........................................................................................................................137

Operating Stick Controller Kit......................................................................................138

Multiplexed I/O Demo..................................................................................................141

Level Output....................................................................................................142

Level Input ......................................................................................................144

PWM OUTPUT...............................................................................................146

Appendix A Dobot Magician Homing Operation.................................................148

Dobot Magician User Guide Dobot Magician Homing Operation

Security Precautions

This topic describes the security precautions that should be noticed when using this product.

Please read thisdocumentcarefully before using the robotic arm for the first time. This productneed

to be carried out in an environment meeting design specifications, you cannot remold the product

without authorization, otherwise it could lead to product failure, and even personal injury, electric

shock, fire, etc. The installation personnel, operators, teaching personnel, and programmers of the

robotic arm must read this document carefully and use the robotic arm strictly according to the

regulations of this document strictly.

1.1 General Security

DANGER

Robotic arm is an electrical equipment. Non-professional technicians cannot modify the

wire, otherwise it is vulnerable to injury the device or the person.

The following security rules should be followed when using the robotic arm.

You should comply with local laws and regulations when operating the robotic arm. The

security precautions in this document are only supplemental to local laws and regulations.

The DANGER, WARNING, and NOTICE marks in this document are only

supplemental to the security precautions.

Please use the robotic arm in the specified environment scope. If not, exceeding the

specifications and load conditions will shorten the service life of the product even damage

the equipment.

Before operating and maintaining the robotic arm, the personnel responsible for the

installation, operation and maintenance must be trained to understand the various security

precautions and to master the correct methods of operation and maintenance.

Highly corrosive cleaning is not suited to cleaning the robotic arm. The anodized

components are not suitable for immersion cleaning.

People cannot repair and disassemble the robotic arm without professional training. If

there is a problem with the robotic arm, please contact Dobot technical support engineer

in time.

Please comply with the relevant laws to deal with the product which is scrapped, and

protect the environment.

There are small parts in the packing box, Please keep them away from children, to avoid

any accidents.

DO NOT let children play with the robotic arm alone.All processes need to be monitored

while running. After processes have finished, please turn off the equipment promptly.

DO NOTput hands into the workspace of the robotic arm while running, to avoid bruising

or pinching.

Be careful during the robotic arm carrying or installing. Please follow the instructions on

Dobot Magician User Guide Dobot Magician Homing Operation

the packing box to put down the robotic arm gently and place it correctly in direction of

arrow.

Commissioning of the incomplete machine is prohibited until it has been installed in a

machine and the whole machine complies with the provisions of the Machinery Directive

(2006/42/EC).

It is prohibited to modify or remove the nameplates, instructions, icons and marks on the

robotic arm and the related equipment.

Please refer to Dobot Magician User Guide along with the packing box before using.

Precautions

Please make the Dobot Magician in the workspace with a 45°angle between the Forearm

and Rear Arm (as shown in Figure 1.1) before starting up. If the LED indicator turns red

after starting up, it indicates that the Dobot Magician is at a limited position. Please make

the Dobot Magician in the workspace.

Figure 1.1 The Forearm and Rear Arm position

Dobot Magician will move slowly to the specific position when shutdown. DO NOT put

hands into the workspace of the Dobot while running, to avoid bruising or pinching. Only

once the LED indicator completely turns off, the Dobot Magician can be powered down.

If the coordinates of the Dobot Magician shown on the DobotStudio are abnormal, please

press the Reset button on the back of the base to reset Dobot Magician or click Home on

the DobotStudio page to perform homing.

During resetting, Dobot Magician will disconnect from the PC automatically and the

LED indicator on the base turns yellow. About 5 seconds later, if the LED indicator

turns green, it indicates that the reset is successful.

During homing, Dobot Magician will rotate clockwise to the limited position and

then return to the homing point automatically, and the LED indicator on the base

turns blue and is blinking. After homing, if there is a beep sound and the LED

indicator turns green, it indicates that the homing is successful.

Please turn off the Dobot Magician completely first before connecting or disconnecting

external equipment, such as Bluetooth, WIFI, stick controller, infrared sensor, color

sensor, etc. Or, it causes damage to your device.

Dobot Magician User Guide Dobot Magician Homing Operation

Please wear the lasing protective eyeglass when using the laser module. Please protect

your eyes and skin from the laser.

The heating rod will produce high temperature up to 250℃ when using the 3D printing

module, please be careful.

Please DO NOT operate or turn off Dobot Magician when burning firmware, to avoid

machine damage.

Dobot Magician User Guide Dobot Magician Homing Operation

Quick Start

This topic briefly describes how to operate the Dobot Magician with the software DobotStudio,

allowing you to quickly know and use the robotic arm. Figure 2.1 shows the process of getting

started with the Dobot Magician.

Figure 2.1 The process of getting started with the Dobot Magician

Connecting Cables to the Dobot Magician

Dobot Magician User Guide Dobot Magician Homing Operation

Figure 2.2 Connect the Dobot Magician to your computer

Installing the DobotStudio

You can control Dobot Magician by DobotStudio to implement functions such as Teaching &

Playback, fully programmable applications, and 3D printing. This topic introduces Teaching &

Playback.

System Requirements

The DobotStudio supports the following Windows and macOS versions.

Windows 7, Windows 8, andWindows 10 (Thismanual isexplained based on this version)

macOS 10.10, macOS 10.11, and macOS 10.12

Obtaining the DobotStudio Package

Before using Dobot Magician, download the Windows DobotStudio package from

https://www.dobot.cc/downloadcenter.html. The macOS version is also downloadable in this URL.

Installing the DobotStudio

Prerequisites

The DobotStudio package has been obtained.

Procedure

Unpack the DobotStudio package to a destination directory.

Tabla de contenidos

Otros manuales de Robótica de ShenZhen Yuejiang Technology

ShenZhen Yuejiang Technology

ShenZhen Yuejiang Technology Dobot Vision Kit Manual de usuario

Manuales populares de Robótica de otras marcas

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manual de usuario

SunFounder

SunFounder PiDog Manual de usuario

Universal Robots

Universal Robots UR5 Manual de usuario

Universal Robots

Universal Robots E Series Manual de usuario

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manual de usuario

EFORT

EFORT ECR5 Manual de instrucciones

Epson

Epson C8 Series Manual de usuario

WowWee

WowWee ROBOQUAD Manual de usuario

Milvus Robotics

Milvus Robotics SEIT 100 Manual de usuario

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manual de usuario

fischertechnik

fischertechnik Mini Bots Manual de usuario

YASKAWA

YASKAWA MA2010 Manual

Abicor Binzel

Abicor Binzel iCAT mini Manual de usuario

ABB

ABB OmniCore E10 Manual de usuario

YASKAWA

YASKAWA Motoman DX200 Manual de usuario

pitsco

pitsco Tetrix Max Manual de usuario

ECOVACS

ECOVACS DEEBOT R95 Manual de usuario

Feng Yuan

Feng Yuan Interstellar Warrior Manual de usuario