5.1.3 Stop automatic time report
Description: Automatic timed reports will stop once Tracker receives stop command
Comm
and: W<passw
ord>,002,000
Example:
SMS sent:W000000,002,000
SMS received: Set Timer Ok/000
Meaning: Tracker will stop automatic timed report
Description: To authorize a mobile phone number for the SOS,1 or 2 or 3 button. When the button
is press a message will be sent and/or simultaneously a call will be made to the authorized number.
Comm
and: W<passw
ord>,003,F
,P
,<tele
phone
num
ber>
Notes:
(a) F=0,cancel this function
=1,only send SMS to the preset number
=2,only call the preset number
=3,send SMS and also Call the preset number
P=1,set a authorized number for Call 1button
=2,set a authorized number for Call 2button
=3,set a authorized number for Call 3button
=4,set a authorized number for Call SOS button
(b)When one of the buttons is pressed and a call is made, you can call and talk with the
tracker-holder
(c)Press Cancel button to hang up the call or cancel a calling
Example:
SMS sent:W000000,003,3,1,123456789
SMS received: Set Tel OK/3,1,123456789
Meaning: When the SOS button is pressed, Tracker will send an SMS to telephone number
“123456789 and also make a phone call to it
When a call is coming in, the green light is on. Press SOS button to receive the incoming call and
then talk with the caller, To complete the conversation, hang up the call by pressing Cancel button
For more detailed SMS commands please go to Chapter 8-SMS Command List
5.2 GPRS Settings by SMS
Tracking via GPRS, you should set IP Port and APN for Tracker
Ensure that your SIM card in Tracker supports GPRS connection prior to setting.
5.2.1 Set ID for Tracker
