Sharp ViewCam VL-WD450E Manual de usuario

LIQUID CRYSTAL DISPLAY CAMCORDER

VL-WD450E VL-WD650E

ENGLISH

OPERATION MANUAL

;;

;

;;;

;;

;

;;;

VL-WD450E/hyou; 01/3/22/18:00

VL-WD450E

VL-WD650E

VL-WD450E

VL-WD650E

Before using the camcorder, please read this operation manual carefully,

especially page vii.

WARNING

TO PREVENT SHOCK

HAZARD, DO NOT EXPOSE

THIS APPLIANCE TO RAIN

OR MOISTURE.

This equipment should be used with

the recommended AC adapter/battery

charger or battery pack.

CAUTION

To prevent electric shocks and fire

hazards, do NOT use any other power

source.

CAUTION

To prevent shock, do not open the

cabinet. No user serviceable parts

inside. Refer servicing to qualified

dealer or service centre.

Important:

Audio-visual material may consist of

copyrighted works which must not be

recorded without the authority of the

owner of the copyright. Please refer to

relevant laws in your country.

Power supply:

This unit can be operated by

connecting it to either the AC adapter/

battery charger or battery pack. The

AC adapter/battery charger

incorporates the AUTO VOLTAGE (AC

110–240 V, 50/60 Hz) function.

NOTE

The LCD panel of this camcorder is a very high technology product with more than

61,000 (VL-WD450E)/close to 90,000 (VL-WD650E) thin-film transistors*, giving you

fine picture detail. Occasionally, a pixel may appear on the screen as a fixed point of

blue, green, red, or black. Please note that this does not affect the performance of

your camcorder.

Trademarks

• SmartMedia is a trademark of Toshiba Corporation.

• DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and

Matsushita Electric Industrial Co., Ltd.

• All other brand or product names are registered trademarks or trademarks of their respective

holders.

*Specifications are subject to change without notice.

OPERATION MANUAL ENGLISH

Note: The images of the camcorder in this operation manual are based upon the VL-WD450E.

WARNING:

This Camcorder must be supplied only with DC 7.4 volts from a BT-L221, BT-

L441, BT-LS222 or BT-LS442A battery or the AC adapter/battery charger (UADP-

0321TAZZ).

CAUTION:

As there are no user-serviceable parts inside the Camcorder or AC adapter/

battery charger, do NOT remove their cabinets as touching parts inside could

result in electric shock. Please refer servicing to a qualified dealer or a

Camcorder service centre approved by Sharp.

Information for Australia/New Zealand Only

ENGLISH

NOTE

This Camcorder is a high technology product.

The LCD Panel comprises 61,600 (VL-WD450E)/89,856 (VL-WD650E) TFT

Transistors. Due to the high density of transistors, it is possible that some pixels may

fail.

Important:

Copying such material without permission of the relevant licensees or owners of the

Sharp is not in a position to authorize the recording of copyright works and nothing

in this operation manual should be read or implied as giving that authority.

Quick Operation Guide

Please consult this operation manual

further for details on these and other

functions of your camcorder.

Charging the Battery Pack

1Connect the supplied power cord to the

AC power socket on the AC adapter/

battery charger, and insert the AC plug

into a power outlet.

2Align the smark on the battery pack

with the amark on the charger (1) and

guide the battery into the groove.

Pressing the battery (2), slide it in the

direction of the arrow (3) until it locks

into place.

Attaching the Battery Pack

1Make sure that the Power switch is set

to OFF.

2Lift up the viewfinder.

3Align the -mark on the side of the

battery pack with the qmark on the

camcorder (1), and slide the battery

pack down completely until it locks into

place (2).

Turning the Power on

To use the camera recording

functions, hold down the Lock

button and set the Power switch to

CAMERA.

Media Selection switch

Power switch

To use the playback and editing

functions, hold down the Lock

button and set the Power switch to

VCR.

Switching the Media

To use a mini DV cassette for

recording and playing back

images, set the Media Selection

switch to TAPE.

To use a SmartMedia card for

recording and playing back still

images, set the Media Selection

switch to CARD.

Turning the Power off

Set the Power switch to OFF

without pressing the Lock button.

Lock button

SAVE

REC

SAVE

REC

Inserting a Mini DV Cassette

1Attach the power source to the

camcorder, then slide the cassette

compartment door release and open the

cassette compartment door.

2Insert the cassette fully with the window

facing outwards, and with the erasure

protect tab facing upwards.

3Press the Wmark gently until the

cassette holder clicks into place. Close

the compartment door by pressing the

centre until it clicks into place.

Inserting a SmartMedia Card

1Make sure that the power switch is set to

OFF.

2Open the LCD monitor.

3Open the card slot cover in the direction

of arrow.

Card slot cover

Contact area

Wmark

4Insert a SmartMedia card into the slot

as shown below, and push it in as far as

it will go.

5Close the card slot cover.

Chipped corner

iii

Tape Playback

1Press the LCD monitor OPEN release

button (1), and open the LCD monitor

to a 90° angle to the camcorder body

(2).

2Adjust the LCD monitor to an angle that

allows easy viewing on the on-screen

picture.

To stop playback

Press d.

3Set the Media Selection

switch to TAPE.

4Hold down the Lock button

and set the Power switch to

VCR.

5Press e(or r) on the Operation

button to rewind (or fast forward) the

tape to the desired point.

6Press yto begin playback.

AUDIO

Quick Operation Guide

Easy Camera Recording on

Tape

1Make sure that a cassette is inserted.

5Press the REC START/STOP button to

begin recording.

2Remove the lens cap, and lift up the

viewfinder.

3Set the Media Selection

switch to TAPE.

4Hold down the Lock button

and set the Power switch to

CAMERA.

Lock button

REC

Power Zoom

control

Zooming

Push the Power Zoom control to T (1)

(telephoto) or W (2) (wide angle) side.

LCD monitor OPEN

release button

Lock button

Card Recording

1Make sure that a SmartMedia card is

inserted.

Lock button

Card Playback

1Press the LCD monitor OPEN release

button (1), and open the LCD monitor

to a 90°angle to the camcorder body

(2).

2Remove the lens cap, and lift up the

viewfinder.

3Set the Media Selection

switch to CARD.

4Hold down the Lock button

and set the Power switch to

CAMERA.

5Press the STILL button to begin

recording.

AUTO

CARD

9001

3Set the Media Selection

switch to CARD.

4Hold down the Lock button

and set the Power switch to

VCR.

5Press the eor ron the Operation

button to move the selection frame to

the desired image.

100 0003-

NORMAL

6Press y.

NORMAL 1 03 103

NORMAL

100 0003-

CARDCARD

LCD monitor OPEN

release button

Lock button

Selection Frame

2Adjust the LCD monitor to an angle that

allows easy viewing on the on-screen

picture.

Supplied Accessories

Battery pack

BT-L221

AC adapter/

battery charger Power cord DC cable

Remote control

AA battery for

remote control K2

CR2025 type

lithium battery

Audio/video cable

(RCA type)

Lens cap Shoulder strap

PixLab Video

Capture Software

(Lite Version)

PC connecting

cable

Zoom microphone Windscreen

3.3 V type 8 MB

SmartMedia™ card*

SmartMedia card

protective case

* Including 2 index labels and 4 write-protect seals.

Optional Accessories

Standard-life

battery pack

BT-L221

Extended-life

battery pack

BT-L441

Standard-life intelligent

battery pack

BT-LS222

Extended-life intelligent

battery pack

BT-LS442A

PixLab USB Digital Moving Picture Kit

VR-PKU10E

Mini DV cassette

VR-DVM60N

Soft case

VR-33SC

Note: Some of these accessories may not be available in selected areas.

vii

•When the camcorder is not in use, remem-

ber to remove the cassette tape, turn off

the power, and disconnect the camcorder

from the power source.

•Do not aim the lens at the sun.

Do not allow direct sunlight to strike the

camcorder lens or LCD monitor screen,

whether or not recording is in progress, as it

may damage the CCD sensor or LCD screen

surface. Be particularly careful when

recording outside.

•When shooting in dark places, avoid sudden

brightly lit objects or light sources, such as

the sun. Otherwise, the image may white out.

Should this happen, point the lens in a

different direction until the picture returns to

normal.

•Avoid magnetic sources.

Using the camcorder near

strong fluorescent lights,

motors, televisions, or

other magnetic sources

may adversely affect

recorded images.

•Using the camcorder near a broadcasting

station or other powerful transmission

source may cause buzzing or picture

deterioration.

•Avoid shocks and dropping.

Do not drop or otherwise

subject the camcorder to

hard shocks or strong

vibrations. Bumping or

striking the unit during

recording will generate noise

in the recorded image.

•Avoid placing the

camcorder in close

proximity to lighting

equipment.

The heat from

incandescent lights

may deform the

camcorder, or cause it

to malfunction.

•Always respect prohibitions or restrictions

on the use of electronic equipment on

commercial flights or in other sensitive

areas.

•Be aware of the temperature and humidity.

You can use your camcorder at 0°C to

L40°C, and at 30% to 80% relative humidity.

Do not store the unit in an unventilated car in

the summer, in direct

sunlight, or near strong

heat sources; this can

result in severe damage

to the unit casing and

circuitry.

•Avoid situations where water, sand, dust or

other foreign matter could get on or inside

the camcorder, and do not use or leave

your camcorder in areas with excessive

smoke, steam or moisture.

Such environments can

cause malfunctions or

cause mildew to form

on the lenses. Be sure

to keep the unit in a

well-ventilated location.

•Some small, portable

tripods may be difficult to

attach and may not be

sturdy enough to support

your camcorder. Be sure to

use only a strong, stable

tripod.

•When using your camcorder in a cold

environment, the LCD monitor screen often

appears less bright immediately after the

power is turned on. This is not a malfunc-

tion. To prevent the camcorder from

becoming too cold, wrap it in a thick cloth

(a blanket, etc.).

Precautions

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Videocámara de Sharp

Sharp

Sharp ViewcamZ VL-Z3S Manual de usuario

Sharp

Sharp VL-Z100H Manual de usuario

Sharp

Sharp VL-Z100E S Manual de usuario

Sharp

Sharp ViewCam Slim VL-PD6S Manual de usuario

Sharp

Sharp ViewCam VL-AH151S Manual de usuario

Sharp

Sharp ViewcamZ VL-Z3H Manual de usuario

Sharp

Sharp VL-C8000S Manual de usuario

Sharp

Sharp VL-SD20H Manual de usuario

Sharp

Sharp ViewCam VL-E89E Manual de usuario

Sharp

Sharp ViewCam Slim VL-ME100E Manual de usuario

Sharp

Sharp ViewCam VL-E79E Manual de usuario

Sharp

Sharp ViewcamZ VL-Z7E Manual de usuario

Sharp

Sharp VC-C50SA Manual de usuario

Sharp

Sharp VL-PD3U Manual de usuario

Sharp

Sharp VL-PD1U Manual de usuario

Sharp

Sharp VL-Z800S Manual de usuario

Sharp

Sharp ViewcamZ VL-Z1S Manual de usuario

Sharp

Sharp ViewaCam VL-H29E Manual de usuario

Sharp

Sharp VIEWCAM VL-A10H Manual de usuario

Sharp

Sharp VL-Z100H Manual de usuario

Sharp

Sharp ViewCam VL-A111S Manual de usuario

Sharp

Sharp VL-Z700S Manual de usuario

Sharp

Sharp VL-PD6H Quick operation Guía del usuario

Sharp

Sharp VIEWCAM VL-AH150U Manual de usuario

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario