Sharp ViewCam Slim VL-ME100E Manual de usuario

OPERATION MANUAL

ENGLISH

LIQUID CRYSTAL DISPLAY CAMCORDER

VL-ME100E

Kogei Intec Corporation

•Before using the camcorder, please read this operation manual carefully, espe-

cially pages ix to xi.

•The table of contents is located on pages xii to xiv.

OPERATION MANUAL ENGLISH

WARNING

TO PREVENT SHOCK

HAZARD, DO NOT EXPOSE

THIS APPLIANCE TO RAIN

OR MOISTURE.

This equipment should be used with

the recommended AC adapter or

battery pack.

CAUTION

To prevent electric shocks and fire

hazards, do NOT use any other power

source.

CAUTION

To prevent shock, do not open the

cabinet. No user serviceable parts

inside. Refer servicing to qualified

dealer or service centre.

Important:

Audio-visual material may consist of

copyrighted works which must not be

recorded without the authority of the

owner of the copyright. Please refer to

relevant laws in your country.

Power supply:

This unit can be operated by

connecting it to either the AC adapter

or battery pack. The AC adapter

incorporates the AUTO VOLTAGE (AC

110–240 V, 50/60 Hz) function.

NOTE

The LCD panel of this camcorder is a very high technology product with more than

200,000 thin-film transistors*, giving you fine picture detail. Occasionally, a pixel may

appear on the screen as a fixed point of blue, green, red, or black. Please note that

this does not affect the performance of your camcorder.

*Specifications are subject to change without notice.

Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation

in the United States and/or other countries.

• Adobe Acrobat Reader is a trademark of Adobe Systems Incorporated.

• DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd., and

Matsushita Electric Industrial Co., Ltd.

• All other brand or product names are registered trademarks or trademarks of their respective

holders.

WARNING

To prevent the MultiMediaCard and SD

Memory Card from being swallowed by

children, keep these items out of their

reach. If swallowed, seek medical

advice immediately.

Kogei Intec Corporation

WARNING:

This Camcorder must be supplied with D.C. 7.4 volts only from a BT-LS222, BT-

L221, BT-L441, or BT-LS442A battery or the AC adapter (UADP-0321TAZZ).

CAUTION:

As there are no user-serviceable parts inside the Camcorder or AC adapter, do

NOT remove their cabinets as touching parts inside could result in electric

shock. Please refer servicing to a qualified dealer or a Camcorder service

centre approved by Sharp.

NOTE

This Camcorder is a high technology product.

The LCD Panel comprises 200,640 TFT Transistors. Due to the high density of

transistors, it is possible that some pixels may fail.

Important:

Copying such material without permission of the relevant licensees or owners of the

Sharp is not in a position to authorize the recording of copyright works and nothing in

this operation manual should be read or implied as giving that authority.

ENGLISH

Information for Australia/New Zealand Only

Kogei Intec Corporation

Quick Operation Guide

Please consult this operation manual further for

details on these and other functions of your

camcorder.

Charging the Battery Pack

1Connect the supplied power cord to the

AC power socket on the AC adapter/

battery charger, and insert the AC plug

into a power outlet.

2Align the dmark on the battery pack

with the fmark on the charger (1) and

guide the battery into the groove.

Pressing the battery (2), slide it in the

direction of the arrow (3) until it locks

into place.

• The CHARGE indicator lights up. The

indicator goes off when the battery is

fully charged.

Attaching the Battery Pack

1Make sure that the POWER switch is set

to OFF.

2Pull out the viewfinder completely, and

then lift it up.

3Align the mark on the side of the

battery pack with the amark on the

camcorder (1). Press the battery pack

and slide it down completely until it locks

into place (2).

CHARGE indicator

Inserting a Mini DV Cassette

1Supply power to the camcorder.

2Hold the camcorder as shown, slide the

cassette compartment door release and

open the cassette compartment door

completely.

3Insert the cassette fully with the window

facing upwards and the erasure protect

tab facing outwards.

SAVE

REC

SAVE

REC

mark

4Press the mark gently until the

cassette holder clicks into place.

5Close the compartment door by pressing

the centre until it clicks into place.

Kogei Intec Corporation

ii E

4Close the card slot cover.

Inserting a Card

This camcorder accepts an SD Memory Card

(commercially available) or a MultiMediaCard

(supplied) for storage of still images.

1Make sure that the POWER switch is set

to OFF.

2Hold the camcorder as shown, and slide

the card slot cover release in the

direction of the arrow to open the cover.

Label

Chipped

corner

3Insert a card into the slot with the label

facing upwards and the chipped corner

facing the lens, and then push it in as far

as it will go.

Using the Viewfinder

1Pull out the viewfinder completely.

2Raise the viewfinder to better aim the

camcorder depending on your position.

Using the LCD Monitor

180

1Press the LCD monitor OPEN release in

the direction of the arrow (1), and open

the LCD monitor (2).

2Adjust the LCD monitor to an angle that

allows easy viewing of the on-screen

picture.

Kogei Intec Corporation

Quick Operation Guide

Eiii

Camera Recording on Tape

Lock button

REC

4Hold down the Lock

button and set the

POWER switch to VCR.

2Open the LCD monitor and adjust the

angle.

1/3

REW

DISP

min

PLAY/

STOP

ST I LL

5Touch [REW] or [FF] to rewind or fast

forward the tape to the desired point.

Lock button

3Set the Media Selection

switch to TAPE.

Tape Playback

1Make sure that the recorded Mini DV

cassette is inserted.

1/3 DISP

min

1/3

REW

PLAY/

STOP

ST I LL

6Touch [PLAY/STILL] to begin playback.

To stop playback

Touch [b] (Stop).

1Make sure that a Mini DV cassette is

inserted.

2Remove the lens cap. Pull out the

viewfinder completely or open the LCD

monitor.

3Set the Media Selection

switch to TAPE.

4Hold down the Lock

button and set the

POWER switch to

CAMERA.

5Press the Power Zoom T (Telephoto) or

W (Wide angle) button to zoom in on or

out from the subject.

Power Zoom buttons

Media Selection switch

REC START/STOP button

POWER switch

To pause recording

Press the REC START/STOP button again.

6Press the REC START/STOP button to

begin recording.

To turn the power off

Set the POWER switch to OFF without pressing

the Lock button.

Kogei Intec Corporation

iv E

Card Recording

Lock button

6Press the STILL button to record a still

image of the subject.

5Press the Power Zoom buttons to frame

the subject as you desire.

AUTO

NORMAL

CARD

1/23

RECORD I NG TO

MEMORY CARD

Card Playback

1Make sure that the recorded card is

inserted.

2Open the LCD monitor and adjust the

angle.

3Set the Media Selection

switch to CARD.

5If the image you want to play back does

not appear, touch [H] or [J] to scroll

through the thumbnail images.

6Touch the desired image to select, and

then touch the image again to set.

•To set the image enclosed by the

selection frame, you only need to touch

the image once.

•The selected image is displayed in full-

screen.

Power Zoom buttons

STILL button

Media Selection switch

POWER switch

1Make sure that a card is inserted.

2Remove the lens cap. Pull out the

viewfinder completely or open the LCD

monitor.

3Set the Media Selection

switch to CARD.

4Hold down the Lock

button and set the

POWER switch to

CAMERA.

4Hold down the Lock

button and set the

POWER switch to VCR.

Lock button

PLAYBACK

NORMA L PAGE 1/ 2

PR I NTPRO- DEL

TECT ORDER

100-0006

654

321

PAGE 1/ 2

PR I NTDEL ORD ER

100-0003

To turn the power off

Set the POWER switch to OFF without pressing

the Lock button.

Kogei Intec Corporation

Quick Operation Guide

Dual Recording

The Dual Recording function makes it possible

to record motion images on a tape and still

images on a card.

6Press the REC START/STOP button to

begin recording motion images of the

subject on a tape.

•Press the REC START/STOP button

again to pause recording.

NORMAL

REC

AUTO

2/98

Press the STILL button to record a still

image of the subject on a card.

Lock button

1Make sure that a Mini DV cassette and a

card are inserted.

2Remove the lens cap. Pull out the

viewfinder completely or open the LCD

monitor.

3Set the Media Selection

switch to DUAL.

4Hold down the Lock

button and set the

POWER switch to

CAMERA.

Media Selection switch

STILL button

REC START/STOP button

POWER switch NORMAL

CARD

RECORD I NG TO

MEMORY CARD

AUTO

2/98

CARD

Power Zoom buttons

5Press the Power Zoom buttons to frame

the subject as you desire.

To turn the power off

Set the POWER switch to OFF without pressing

the Lock button.

Kogei Intec Corporation

vi E

SD Memory Cards and

MultiMediaCards

SD Memory Cards and MultiMediaCards are

compact recording media just 32 mm long and

24 mm wide which support the needs of the

digital network society where music, images,

games and various other provider services are

offered.

• It is possible to use SD Memory Cards

(commercially available) and

MultiMediaCards (one card supplied) as

recording media for still images with this

camcorder. (SmartMedia™ cards and

Memory Stick™ media cannot be used.) In

this operation manual, “card” refers to these

SD Memory Cards and MultiMediaCards.

About Your Camcorder

SD Memory Card MultiMediaCard

SmartMedia™ card Memory Stick™ media

• SD Memory Cards are superior to

MultiMediaCards in terms of copyright

protection functions and high speed transfer.

• SD Memory Cards are compatible with

MultiMediaCards, and data stored on

MultiMediaCards can be used with SD

Memory Cards.

DV Technology

Digital video, DV, is a revolutionary technology

that enables recording and playback of high

quality images with the use of special digital

features previously unavailable with conven-

tional analogue formats.

DV and conventional video cassette

tapes

There are two kinds of DV-format video

cassette tapes: the Mini DV cassette and the

larger DV cassette used for extended playback

and recording. This camcorder only operates

with Mini DV cassettes. DV cassettes cannot

be used. Be sure to use Mini DV cassettes with

the mark.

Mini DV cassette DV cassette

VHS cassette Beta cassette8 mm cassette

Note:

• This camcorder reproduces the highest picture

quality when used with an ME tape. It is recom-

mended that you use an ME tape for high-quality

recording and playback.

8 mm, VHS, and Beta cassettes cannot be

used for playback or recording with this

camcorder.

This product incorporates copyright

protection technology that is protected by

method claims of certain U.S. patents and

other intellectual property rights owned by

Macrovision Corporation and other rights

owners. Use of this copyright protection

technology must be authorized by

Macrovision Corporation, and is intended

for home and other limited viewing uses

only unless otherwise authorized by

Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

Kogei Intec Corporation

Evii

Supplied Accessories

Intelligent

battery pack

BT-LS222 AC adapter/

battery charger Power cord

Audio/video/S-video

cable

CR2025 type

lithium battery Infrared

remote control

DC cable

Zoom microphone

Detachable LCD

cable Lens hood

Windscreen

Shoulder strap 8 MB

MultiMediaCard

PixLab Video

Capture Software

(Lite version) PC connecting cable

AA battery for

remote control ×2

Tabla de contenidos

Otros manuales de Videocámara de Sharp

Sharp

Sharp ViewCam VL-H850S Manual de usuario

Sharp

Sharp ViewcamZ VL-Z3H Manual de usuario

Sharp

Sharp VL-E78E Manual de usuario

Sharp

Sharp VL-DC1E Manual de usuario

Sharp

Sharp VL-PD6H Quick operation Manual de usuario

Sharp

Sharp VL-C750S Manual de usuario

Sharp

Sharp VL-NZ8U Manual de usuario

Sharp

Sharp VL-Z400S Manual de usuario

Sharp

Sharp VIEWCAM VL-AH130U Manual de usuario

Sharp

Sharp ViewCam VL-MC500S Manual de usuario

Sharp

Sharp VL-Z100H Manual de usuario

Sharp

Sharp ViewCam VL-WD255U Manual de usuario

Sharp

Sharp VL-H400S Manual de usuario

Sharp

Sharp VIEWCAM VL-A110U Manual de usuario

Sharp

Sharp ViewCam Slim VL-PD6S Manual de usuario

Sharp

Sharp ViewCam VL-A111S Manual de usuario

Sharp

Sharp VL-SW50U Manual de usuario

Sharp

Sharp VN-EZ1U Manual de usuario

Sharp

Sharp VL-PD6H Quick operation Guía del usuario

Sharp

Sharp VL-A111S/H/E Manual de usuario

Sharp

Sharp VL-MC500U Manual de usuario

Sharp

Sharp Viewcam VL-NZ10S Manual de usuario

Sharp

Sharp VL-C7200S Manual de usuario

Sharp

Sharp ViewCam VL-NZ50S Manual de usuario

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario