Sharkoon QP500 Manual de usuario
Handbuch
Manual
Manuel d‘utilisation
Guia usario
Manuale d´istruzioni
Gebruiksaanwijzing
Guia usário
Instukcja obstugi
ユーザー マニュアル
使用手冊
ATX 2.3 POWER SUPPLY
QP500
QP600
QP500
QP600
2
Content
1. Features 3
2. Specifications 4
2.1 Overview 4
2.2 Mains voltage and protective functions 4
2.3 Safety standards 4
2.4 Warranty period 4
3. Parts and accessories 5
4. Installation 6
4.1 Installing the PSU into a PC case 6
4.2 Connecting the PC components to the PSU 6
4.2.1 The connectors at a glance 6
4.2.2 Connecting mainboard and graphics card(s) 7
4.2.3 Connecting optical drives and other peripheral devices 8
4.2.4 Checking all connections 8
5.Troubleshooting 9
6. Cable diagrams 9
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend you to read this manual completely.
Enjoy our product!
SHARKOONTechnologies
QP500
QP600
3
1. Features
ATX 12 V v.2.3:
Supports the latest Intel and AMD processor based systems.
Separate 12 V rails:
Independent 12 V rails guarantee a stable power supply for all components.
80 plus bronze:
This power supply unit complies with the requirements of the “80 plus bronze”
certification, providing an efficiency of 85% under 50% load and 82% efficiency under
20% and 100% load.
Active PFC function:
This power supply operates with active power factor correction (PFC).
120 mm fan:
The installed 120 mm fan provides a considerably higher airflow with lower rpm, thus
reducing the operating noise effectively.
2x PCIe
6-pin plus 6+2-pin
PCIe connectors:
This power supply unit is equipped with two PCIe connectors (6-pin plus 6+2-pin).
QP500
QP600
4
WARNING
To prevent the risk of electric shock, do not open the power supply housing.
No user-exchangeable parts inside. Refer service and maintenance to
authorized Sharkoon personnel. Warranty is void under unauthorized
attempt to open the power supply housing. Suitable for indoor or office use
only. Keep the power supply away from humidity!
2. Specifications
2.1 Overview
2.2 Line voltage and protective functions
This PSU works with 100 to 240 V (50/60 Hz) and is equipped with the following protective functions:
1. Over voltage protection
2. Short circuit protection: The power supply is designed with a short circuit protection to prevent
damage of the power supply components. Main power will be shutdown when a short circuit occurs.
The PSU will return to normal after the short circuit has been removed and the main power switch has
been turned off and back on again, with a minimum cycle pause of 2 seconds.
3. Over current protection
2.3 Safety standards
Our power supply has been certified to comply with the following regulations: CE and CB.
2.4 Warranty period
For this power supply unit we provide a 2 years warranty.
QP500
QP600
5
3. Parts and accessories
A – Power supply ”QP500” or ”QP600”
B – Power cord
C – Set with mounting screws
Note:
If you are missing any of the items listed above, please contact our customer service immediately:
[email protected] (international).
A B
C
QP500
QP600
6
4. Installation
Remove an already installed PSU from the case. Proceed as follows:
1. Switch off your PC. Disconnect the PSU’s power cord from the wall outlet and your PSU. Unplug all
cables connected to the PC case (e.g. keyboard, mouse etc.).
2. Open the PC case (for additional information refer to the PC case’s manual).
3. Disconnect all cable connections between the PSU and other PC components (e.g. mainboard, HDDs,
drives, fans etc.).
4. Remove the mounting screws connecting PSU and PC case and carefully take the PSU out of the case.
4.1 Installing the PSU into the PC case
1. Insert the PSU into the PC case and put it against the PSU bracket on the case’s back side.
2. Screw the PSU to the case from the outside using the included screws. Pay attention not to cover the
fan/air intake of the built-in PSU.
4.2 Connecting the PC components to the PSU
4.2.1 The connectors at a glance
Picture
Name 20+4-pin ATX power
connector (1x)
4+4-pin P8 power
connector (1x)
6-pin PCIe power
connector (1x)
6+2-pin PCIe power
connector (1x)
Picture
Name SATA power connector
(6x)
4-pin connector for pe-
ripheral devices (2x)
4-pin floppy connector
(1x)
QP500
QP600
7
Note:
All connectors are designed fault-preventing to avoid misconnection. If you cannot attach the female con-
nector to the male connector of the drive or peripheral, please check if both connectors are attached in the
correct orientation.
Do not force to plug the female connector into the male connector in wrong orientation, nor modify any
of the components, as this will damage the PSU and your hardware. SHARKOON warranty does not cover
damage caused by incorrect handling.
4.2.2 Connecting mainboard and graphics card(s)
1. Plug the ATX power connector (fig. 1) to the respective jack on the mainboard.
fig. 1
2. In case your mainboard also provides an additional 4-pin or 4+4-pin power connector (the so called P4
resp. P8 connector), also plug the respective connector (fig. 2).
fig. 2
Note:
The power connection of the mainboard depends on the vendor and may vary. For detailed information
on how to establish the power connection refer to your mainboard’s manual.
QP500
QP600
8
3. In case your PCIe graphics card is equipped with an additional power connector, also plug the 6-pin
(fig. 3a) or 6+2-pin (fig. 3b) PCIe power connector which will provide a stable power support for your
graphics card.
fig. 3a fig. 3b
4.2.3 Connecting optical drives and other peripheral devices
1. Connect the 4-pin plug (fig. 4), the SATA plug (fig. 5) and the 4-pin floppy plug (fig. 6) to the respective
peripheral devices.
fig. 4 fig. 5 fig. 6
Note:
For more information refer to the respective manuals of your drives and peripheral devices.
4.2.4 Checking all connections
Make sure that all devices are connected properly then plug the PSU’s power cord to a wall outlet and
switch the power supply on. This ends the installation of the PSU.
QP500
QP600
9
5.Troubleshooting
In case the power supply does not work properly, check the following topics:
1. Is the power cord correctly connected to a wall outlet and the PSU’s power connector?
2. Make sure the on/off switch is turned to the “I” position.
3. Check if the main power connector is correctly plugged to the mainboard.
4. Check if the power connectors are properly connected to the peripheral devices in case the short circuit
protection function was activated when switching on the PSU.
5. Turn the power switch off and back on several times with a minimum cycle pause of 5 seconds.
6. Cable diagrams
20+4-pin ATX power connector
4+4-pin P8 power connector
6/6+2-pol. PCIe-Stromanschluss
SATA power connectors + 4-pin power connector for floppy
SATA power connectors + 4-pin power connector for peripherals
QP500
QP600
10
SATA power connectors + 4-pin power connector for peripherals
Legal disclaimer:
As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to
change without prior notice. National product specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other
technical means. Infringements will lead to compensation.
All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical
modifications reserved.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the
European Directive 2002/96/EC.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household
waste. The correct disposal of your old product will help prevent potential negative consequences to the envi-
ronment and human health.
© SHARKOON Technologies 2011
www.sharkoon.com
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Fuente de alimentación de Sharkoon
Sharkoon
Sharkoon REBEL P30 Gold Manual de usuario
Sharkoon
Sharkoon SilentStorm SFX Bronze 350 Manual de usuario
Sharkoon
Sharkoon SilentStorm SFX Gold Series Manual de usuario
Sharkoon
Sharkoon Silent Storm SHA460-135A Manual de usuario
Sharkoon
Sharkoon WPM Series Manual de usuario
Sharkoon
Sharkoon SHP650 Manual de usuario
Sharkoon
Sharkoon SHP BRONZE Manual de usuario
Sharkoon
Sharkoon WPC Bronze Series Manual de usuario
Sharkoon
Sharkoon SilentStorm Icewind 550 Manual de usuario
Sharkoon
Sharkoon WPM Bronze 400 Manual de usuario
