ShareTech HiGuard V Manual de usuario
QUICK
INSTALLATION
GUIDE
/XV
目錄 / Index
English QIG (Quick Installation Guide)..............................................
I. Hardware Installation.......................................................................
1. Appearance.................................................................................
2. Deployment.................................................................................
II. System Setting................................................................................
Easy system configuration steps.....................................................
繁體版快速安裝指引.........................................................................
一、硬體安裝....................................................................................
1. 硬體外觀說明.........................................................................
2. 硬體連接設定.........................................................................
二、系統設定....................................................................................
簡易系統設定步驟......................................................................
2
2
2
3
4
4
10
10
10
11
12
12
English QIG (Quick Install Guide)
I. Hardware Installation (HiGuard X and V)
1. Appearance
Front panel
1. Power Connection
2. Power Button
3. USB ports
4. Console Port
5. LAN port
6. Port 2 (Custom port)
7. Port 3 (Custom port)
8. Port 4 (Custom port)
9. RESET
100-240V AC, 50-60Hz adapter
In red color when power off; in blue color when power on.
USB 2.0 performs an instant recovery using USB sticks during
system suspend. Wireless 3G, 4G/LTE are supported to offer
uninterrupted WAN connectivity.
For inspecting settings remotely.
Gigabit Ethernet LAN port that connects to the intranet
Gigabit Ethernet WAN/LAN-PHY Flexible Interface
Gigabit Ethernet WAN/LAN-PHY Flexible Interface
Gigabit Ethernet WAN/LAN-PHY Flexible Interface
Using a pointed object, press the button on the steadily for 15
seconds and then release it.
HiGuard X
Rear panel
HiGuard V
Interfaces
1 2 3 4 5 67 8 9
2. Deployment
Connect LAN (RJ45), and Cat. 5e to the device LAN Ethernet Port.
Configure a LAN with DHCP and you’ll obtain 192.168.1.x/24(IP segment)
automatically.
After getting the IP, ping 192.168.1.1 to ensure network connection.
STEP 1
STEP 2
Start Browser
Setup Wizard
。https://192.168.1.1
。Acct./PW :admin / admin
。Select a preferred language
。Setup LAN
。Setup WAN
。URL Blacklist
。Security Setting
。Mail Management (available in HiGuard X)
II. System Setting
Easy system configuration steps
STEP 1. Start Browser (Chrome)
1.1 Open the web browser and enter https://192.168.1.1 in the address bar.
1.2 Enter login Account / Password
Chrome will pop up for authentication, please enter admin (account)
/admin (password) to log in. And select a preferred language for interf-
aces,currently available in English/ Traditional Chinese / Simplified
Chinese.
1.3 Login completed. The wizard will automatically pop up to guide you
through the configuration.
NOTE: A step-by-step wizard will wipe all your data and settings before
saving new settings.
2.1 Setup LAN
Please enter your IP address and Subnet mask .
STEP2. Setup Wizard
2.2 Setup WAN
Administrators can click on the drop-down arrow to select preferred connection
methods. One WAN port must be enabled to proceed.
STATIC: IP address, subnet mask, and default gateway are required to configure
WAN setting. The default gateway is 255.255.255.0
DHCP: A connection method that IP address is assigned by a router/switch in
the perimeter. IP address, subnet mask, and default gateway are not
required.
PPPOE: DSL providers typically use this option. Please enter the account and
password provided by your ISP to gain access to the Internet. If your ISP
provides you a set IP address, you are able to select STATIC.
2.3 Setup URL Blacklists
URL Blacklist is switched off by default. Administrators can enable the function,
select match level, enter blacklisted URL or IP, or select default categories.
2.4 Setup Security Settings
Security settings are switched on by default. Administrators can select actions
taken on detected anomalies.
2.5 Setup Mail Management (available in HiGuard X)
Filtering log and anti-virus are switched on by default. Administrators can
choose manually to switch off if it is not required.
2.6 Setup Completed
To save your configuration settings, click the Save button in the lower right
corner. Please wait for the Setup Wizard to finish. This could take up to 120
seconds.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
