SGM P Series Manual de usuario

USER

MANUAL

P-SERIESP-SERIES

P-6P-6

P-6 POIP-6 POI

P-6 Series dimensions

This manual covers installation, use, and maintenance of the SGM P-6 Series.

A digital version is available at www.sgmlight.com, or upon request via [email protected].

P-6 SERIES

USER MANUAL REV. D

SGM and all a󰀩liated companies disclaim liability for any injury, damage, direct or indirect loss, consequential

or economic loss, or any other loss occasioned by the use of, inability to use, or reliance on the information

contained in this manual. The SGM logo, the SGM name, and all other trademarks in this document pertaining

to SGM services or SGM products are trademarks owned or licensed by SGM, its a󰀩liates, and subsidiaries.

This edition applies to rmware version 2.09 or later.

English edition

All dimensions in millimeters and inches. Drawing not to scale.

P-6

P-6 POI

Contents

P-6 Series dimensions .............................................................................................................................................. 2

P-6........................................................................................................................................................................................................................ 2

P-6 POI ................................................................................................................................................................................................................ 2

Safety information..................................................................................................................................................... 4

Before installing this product................................................................................................................................... 5

Overview..................................................................................................................................................................... 6

Parts identication and terminology ..................................................................................................................................................................... 6

Preparing for installation.......................................................................................................................................... 7

Unpacking ............................................................................................................................................................................................................ 7

Location/ application............................................................................................................................................................................................. 7

Transportation ...................................................................................................................................................................................................... 7

Installing/ rigging the P-6 Series.............................................................................................................................. 7

Rigging process using SGM Omega brackets ..................................................................................................................................................... 8

Tilt Lock ..................................................................................................................................................................... 8

Angle indicator...................................................................................................................................................................................................... 8

Connecting AC power ............................................................................................................................................... 9

Conguring the device.............................................................................................................................................. 9

Connecting to a DMX control device..................................................................................................................... 10

Connecting a wireless transmitter ...................................................................................................................................................................... 10

Disconnecting a wireless transmitter.................................................................................................................................................................. 10

Signal priority...................................................................................................................................................................................................... 10

Conguring the device for DMX control................................................................................................................ 11

About DMX ......................................................................................................................................................................................................... 11

DMX Start address ............................................................................................................................................................................................. 11

Set/ edit DMX address ....................................................................................................................................................................................... 11

DMX modes........................................................................................................................................................................................................ 11

P-6 Connection Diagram .................................................................................................................................................................................... 12

Using standalone operation ................................................................................................................................... 12

Setting a static color manually .............................................................................................................................. 12

Fixture properties.................................................................................................................................................... 13

Factory default ................................................................................................................................................................................................... 13

E󰀨ects................................................................................................................................................................................................................. 13

Individual xture settings ................................................................................................................................................................................... 13

Control menu ........................................................................................................................................................... 14

RDM .......................................................................................................................................................................... 15

Supported RDM functions .................................................................................................................................................................................. 15

RDM functions.................................................................................................................................................................................................... 15

Sensors .............................................................................................................................................................................................................. 15

Troubleshooting ...................................................................................................................................................... 16

POI Permanent Outdoor Installation...................................................................................................................... 16

Accessories ............................................................................................................................................................. 19

Maintenance............................................................................................................................................................. 21

SGM Vacuum test kit.......................................................................................................................................................................................... 21

SGM Uploader cable ......................................................................................................................................................................................... 21

Upgrading the rmware ...................................................................................................................................................................................... 21

Cleaning ............................................................................................................................................................................................................. 21

Fixtures and accessories........................................................................................................................................ 22

Support hotline........................................................................................................................................................ 22

Approvals and certications .................................................................................................................................. 22

User Notes................................................................................................................................................................ 23

WARNING!

Read the following safety precautions carefully before unpacking, installing,

powering, or operating the device.

SGM xtures are intended for professional use only. They are not suitable for household use.

Les luminaires SGM sont impropre à l’usage domestique. Uniquement à usage professionnel.

This product must be installed in accordance with the applicable installation code by a person familiar with

the construction and operation of the product and the hazards involved.

Ce produit doit être installé selon le code d’installation pertinent, par une personne qui connaît bien

le produit et son fonctionnement ainsi que les risques inhérent.

Safety information

• Do not open the device; there are no user-serviceable parts inside.

• Ensure that power is cut o󰀨 when wiring the device to the AC mains supply.

• Ensure that the device is electrically connected to earth (ground).

• Do not apply power if the device or mains cable is in any way damaged.

• Do not immerse the xture in water or liquid.

DANGER! Risk of electric shock. Do not open the device.

• Install in a location that prevents accidental contact with the device.

• Install only in a well-ventilated space.

• Install at least 0.3 m (12 in.) away from objects to be illuminated.

• Install only in accordance with applicable building codes.

• Ensure a minimum clearance of 0.3 m (12 in.) around the cooling fans.

• Do not paint, cover, or modify the device, and do not lter or mask the light.

• Keep all ammable materials well away from the device.

• Allow the device to cool for 15 minutes after operation before touching it.

CAUTION: Exterior surface temperature after 5 min. operation = 49 °C (120 °F). Steady state = 59 °C (138 °F).

WARNING! Take measures to prevent burns and re.

• Do not look directly at the light source from close range.

• Take precautions when working at height to prevent injury due to falls.

• For Permanent Outdoor Installations (POI), ensure that the xture is securely fastened to a load-bearing surface with suitable

corrosion-resistant hardware.

• For a temporary installation with clamps, ensure that the quarter-turn fasteners are turned fully and secured with a suitable

safety cable.

• For elevated installations, secure the xture with suitable safety cables and always comply with relevant load dimensioning,

safety standards and requirements.

• The standard safety wire cable must be approved for a safe working load (SWL) of 10 times the weight of the xture, and

it must have a minimum gauge of 4 mm.

WARNING! Take measures to prevent personal injury.

External cleaning and visual inspection of the xture

Wiring and conduit / containment

Safety Precautions

Before installing this product

Please visit the SGM o󰀩cial website at www.sgmlight.com for the latest version of this user manual/ safety information leaet. Due

to continuous improvements, the instructions may change without notice. SGM always recommends the latest available rmware

version from www.sgmlight.com.

All users of SGM xtures should regularly clean those parts of the xture directly exposed to the elements, such as the

external housing and front lenses. Additionally, all owners of SGM xtures must periodically check the external housing of the

xture for structural breaks, components in bad shape, cracked lenses, or loose screws. To ensure proper operation, but also

to prevent the risk of potential accidents, do not use the xture if the lens, housing, or power cables are damaged. If parts of

the xture appear to be missing, cease use immediately and contact SGM support.

SGM xtures supplied with power and data cable leads are not intended for installation in permanently installed conduit or

containment. When installing xtures in a permanent installation, ensure cable leads are installed as a service loop to an

appropriately rated junction box using suitable cable strain reliefs/ glands. All installed xtures must be securely mounted and

service loop appropriately protected for installation location. All electrical wiring and connections should be completed by a

qualied electrician.

When using electrical equipment, basic safety precautions should always be followed including the following:

1. Do not mount near gas or electric heaters.

2. Permanently installed equipment should be mounted in locations and at heights where it will not readily be subjected

to tampering by unauthorized personnel.

3. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.

4. Do not use this equipment for other than intended use.

5. Refer service to qualied personnel or authorized service centers.

6. Do not look directly into the beam for long periods of time, when the xture is on.

7. The xture shall, under no circumstance, be covered with insulating material of any kind.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

The P-6/ P-6 POI is an RGBW LED xture with high output, designed for multiple applications, including applications where wireless

operation is essential.

P-6 Series’ features:

• Powerful RGBW LED xture, with 24RGB x 24White LEDs divided into six individually controllable segments, weighing

around 12 kg.

• A wash light, a strobe light, a ood light, a pixel light, and a blinder with a non-fading continuous output.

• IP66 rating enables operation in all kinds of environmental settings and in temperatures from -40° C to 50° C.

• Fully adjustable CTC from 2,000K to 10,000K.

• Built-in wireless DMX and preset-able standalone programs.

• Fully RDM implemented.

• Di󰀨erent beam angles available via magnetic easy-t holographic lter frames (STD), or native lenses (POI).

• Integrated handle eases the transport, rigging, and positioning of the xture.

• Rubber feet meant for delicate surfaces, while at the same time prevent xture from sliding (POI n/a).

• Optional accessories such as barndoors and lter frames.

• Corrosion classied C5-M (marine) for coastal and o󰀨shore areas with high salinity (POI only).

Overview

P-6 POI

A: 24xRGB + 24W LEDs

B: P-6 Tilt lock

C: Cooling fans

D: Control panel (POI n/a)

E: OLED Display (POI n/a)

F: Rubber feet (POI n/a)

G: GORE-TEX membrane

H: DMX in and out

I: Power in and out

J: Handle

K: Barndoors attachment points (x2)

L: Safety wire attachment point

M: Holes for Omega bracket / M-10 screws (x6)

N: P-6 POI Tilt lock (POI only)

O: LED indicator (POI only)

P 6

Parts identication and terminology

Figure 1: Parts identication and terminology

Unpacking

Unpack the device and inspect it to ensure that it has not been damaged during transport.

The P-6/ P-6 POI is shipped with:

• 1 x Power cable with IP connector, 2 m./ 78 in. (standard only). In POI versions, a power cable with bare ends is supplied.

• Two Omega brackets with 1/4-turn fasteners (standard only).

• 1 x Spanner with a magnet (POI only).

• 6 x M-10 screws (POI Only).

• Safety information leaet.

Location/ application

The xture is IP66-rated and designed for both indoor and outdoor installations. This means that it is protected from:

• Dust, to the degree that dust cannot enter the device in su󰀩cient quantities as to interfere with its operation.

• High pressure water jets from any direction.

When selecting a location for the device, ensure that:

• It is situated away from public thoroughfares and protected from contact with people.

• It is not immersed in water or exposed to high-pressure water jets.

• It has adequate ventilation.

When using the xture for outdoor events, ensure that:

• For wireless DMX or standalone operation, the protective cover is securely mounted in any unused DMX connector in

order to ensure the IP rating (POI n/a).

• For cabled DMX operation, the DMX out of the last xture is terminated with a 120 ohm resistor between pin 2 and 3

(according to the RS485 standard), and the DMX out is properly sealed, in accordance with the ingress protection (IP)

requirements. A maximum of 32 xtures can be connected to the same DMX link.

Transportation

Always use the supplied packaging or suitable ight case for transportation and storage.

Never carry the xture by connected cables or wires; use the handle.

Preparing for installation

All SGM xtures have locking points at the base for installation and rigging. In both

standard and POI xtures, the distance between the points from center to center is

always 106 mm.

While the base of the standard xtures includes 1/4 turn fastener camlocks to mount the

omega brackets, the POI products come with M-10 nuts for M-10 screws.

The standard P-6 may be installed in any orientation and it might take up to three

omega brackets per xture. Always use the supplied omega brackets to rig the xture

and lock the bracket with the 1/4-turn fasteners.

PLEASE NOTE!!

The 1/4-turn fasteners are only locked when turned fully clockwise.

Depending on the structure, please use appropriate and secure methods for mounting the Omega brackets.

NOTE: In POI xtures, a customized bracket may have to be used to install the xtures. See more about “Installation and

rigging the P-6 POI” on page 17.

Installing / rigging the P-6 Series

106 mm

[ 4,2in ]

Ø 18 mm

[ 0,7in ]

Figure 2: P-6 Series locking points

WARNING! Always secure an elevated P-6 with a safety wire

Fasten a safety wire (not shown) between the load-bearing support structure and the safety wire attachment point on the device.

The safety cable (not included in the package) must:

• Bear at least 10 times the weight of the device (SWL).

• Have a minimum gauge of 4 mm.

• Have a maximum length (free fall) = 30 cm (12 in.).

CAUTION!!

• Always use a safety wire.

• Make sure the slack of the safety wire is at a minimum.

• Never use the handle for secondary attachment.

Rigging process using SGM Omega brackets

Start the rigging process by blocking the lower working area, and make sure the work is

performed from a stable platform.

1. Check that the clamp/ bracket is undamaged and can bear at least 10 times the

weight of the xture. Check that the structure can bear at least 10 times the weight of o f

all installed xtures, lamps, cables etc.

2. Bolt the clamp/ bracket securely to the omega bracket with a M12/ ½” bolt (min. grade

8.8) and a lock nut.

3. Align the omega bracket(s) with two 1/4 turns of the P-6 base. For standard Ome-

ga Bracket, insert the fasteners into the P-6 base bracket, and turn both levers a

full 1/4-turn clockwise to lock. When using the POI Omega Bracket, insert the included

M-10 screws through the bracket holes and tighten them with a M-10 key until they are

fully attached to the base.

4. Working from a stable platform, hang the xture on a truss or other structure. Tighten

the clamp/ bracket.

5. Install a safety wire that can bear at least 10 times the weight of the xture. The safety

wire attachment point is designed to t a carabiner AISI316 grade.

6. Verify that there are no combustible materials, cables, or surfaces to be illuminated with-

in 0.3 m (12 in.) of the xture.

7. Check that there is no risk of the head/ yoke colliding with other xtures or structures.

Holes for omega bracket

Omega bracket

Figure 3: Base with omega bracket

Figure 4: Safety wire attachment point

The P-6 can be tilted from 0° - 120°.

In standard versions, there is no need for any special tools to adjust the tilt angle.

Take the following steps for adjusting the tilt in standard P-6:

1. Loosen both tilt knobs (one on each side) by turning them counter-clockwise.

2. Adjust the tilt to the desired angle and hold it.

3. Lock the position by re-tightening both tilt lock knobs clockwise.

If you feel resistance when tilting the xture, you might not have loosened the tilt lock knobs

enough.

CAUTION!!

If the xture has been operating, always allow it to cool for 15 minutes before handling.

Exterior surface temperature after 5 min. operation = 49° C (120° F). Steady state = 59° C (138° F).

Angle indicator

The P-6 comes with a scale function which eases the adjustment to the tilt desired.

The angle indicator in the wheel shows the current angle of inclination.

NOTE: In POI versions, SGM provides a POI Spanner with a pig-nose key for tilt adjustment. Either use the large or the small

pig-nose key, depending on the type of xture. See “POI Tilt lock” on page 17 to know more about the tilt lock in P-6 POI.

Tilt Lock

Pitch angle

indicator

Figure 5: Tilt lock

Connecting AC power

The P-6 Series can operate on any 100–277 V, 50/ 60 Hz AC mains power supply.

Connect a P-6 standard to AC power using the supplied cable or similar with a maximum of 20 A to

ensure the correct ingress protection (IP rating).

The xture must be grounded/ earthed and able to be isolated from AC power. The AC power supply

must incorporate a fuse or circuit breaker for fault protection.

The power cable color coding is given in gure 7:

• Connect the black wire to live.

• Connect the white wire to neutral.

• Connect the green/ yellow wire to ground (earth).

For a temporary outdoor installation, the mains cable must be

tted with a grounded connector intended for exterior use. For

permanent installations, have a qualied electrician to wire the mains cable directly to a suitable branch circuit. The junction’s ingress

protection (IP) rating must be suitable for the location. Always use a junction box with a proper IP class suitable for the environment.

When installing standard type C circuit breakers, there will be no limitations due to the xture’s in-rush current.

For assistance with alternative congurations, contact your SGM representative.

After connecting the P-6 to power, run the on-board test by selecting TEST → AUTOMATED TEST in the menu to ensure that the

xture and each LED are functioning correctly. POI versions have to be tested through RDM.

PLEASE NOTE!

The protective caps must be securely mounted on any unused DMX connector, in order to maintain the ingress protection (IP rating).

In POI versions, SGM supplies a power cable with bare ends. Connect the xture to power by mounting a power connector

to the bare ended mains cable. Please refer to “Connecting DMX and AC power in POI” on page 18 for connecting AC

power in POI xtures.

CAUTION!!

Do not connect the xture to an electrical dimmer system, as doing so may cause damage.

The fixture must be grounded/

earthed and be able to be isolated

from AC power. The AC power

supply must incorporate a fuse or

curcuit breaker for fault protection.

Color

Black

White

green/yellow

Conductor

live

neutral

ground (earth)

Symbol

Wire

Figure 6: P-6 Power cable

The fixture must be grounded/

earthed and be able to be isolated

from AC power. The AC power

supply must incorporate a fuse or

circuit breaker for fault protection.

Color

Black

White

green/yellow

Conductor

live

neutral

ground (earth)

Symbol

Wire

Figure 7: Connecting AC Power

Conguring the device

The P-6 can be set up by using the control panel and OLED multi-line display on the xture’s head or through RDM.

Please note: In POI versions there is no display mounted in the xture. The adjustments are made through RDM.

See “POI Permanent Outdoor Installation” on page 16 for more information.

The OLED display is the human interface of the xture, as it displays the current status and menu of the xture. The display panel

can be used to congure individual xture settings, check the xture’s wireless status, conrm the rmware version, and read error

messages. The complete list of the menu and all commands available is listed in “Control menu” on page 14.

Before turning on the P-6 make sure the power in cable is properly connected. To turn o󰀨 the device, simply disconnect power in

cable. When the xture is powered, it boots and resets before displaying the currently selected operating mode and the DMX start

address. Navigate through the menus and options using the arrow buttons, and select items using the ENTER button.

DMX

ESC ENTER

6CH MODE

(14)

Figure 8: OLED display and control panel

Using the display panel

• Press the ‘ENTER’ button to access the menu or make a selection.

• Press the arrow buttons to scroll up and down in the menu.

• Press the ‘ESC’ button to take a step back in the menu.

Display

A - Operational mode (quick color, standalone, or DMX mode).

B - DMX address.

C - External data indicator (if DMX control is active).

D - External data protocol (CRMX™ or DMX).

E - Next available DMX address, depending on the xture’s DMX footprint.

Please note: by default, the xture is set to be controlled in DMX mode.

Error Indicator

If any errors are detected, the message ‘ERR’ will be ashing in the display for easy detection.

To read the error message, select ENTER → INFO → ERRORS in the menu.

Shortcuts

• ESC + ENTER: Press ENTER to conrm factory defaults.

• ESC + UP: Display OFF.

• ESC + DOWN: Set up new DMX address; keep ESC and press ENTER to conrm.

• UP + DOWN arrows simultaneously = ip the display upside-down.

The P-6 Series is controllable using a DMX control device, and it can be connected using either a DMX cable, or via the xture’s

built-in CRMX wireless receiver system.

When using a cabled DMX system, connect the DMX-In cable to the input connector and DMX-Out cable to the output, both on

the rear of the xture’s base (chassis mounted male and female 5-pin XLR plugs). For outdoor installations, use only IP-rated XLR

connectors suitable for outdoor use.

In standard xtures, if using a wireless DMX system, remember to use the protective caps in any unused DMX connector in order to

maintain the xture’s IP rating. For POI versions, please refer to “Connecting DMX and AC power in POI” on page 18.

NOTE: SGM xtures provide a passive DMX Thru signal as DMX Out, instead of an active output signal.

Connecting a wireless transmitter

The P-6 is designed to look for wireless transmitters in ‘connect’ state when this option is not yet enabled.

To connect the P-6 to a wireless transmitter:

• Log o󰀨 the currently paired wireless transmitter - see below “Disconnecting a wireless transmitter”.

• Press the connect button on the wireless transmitter.

• Conrm that the xture has paired with the wireless transmitter.

Note: for POI versions, refer to “Connecting a wireless transmitter in POI” on page 18.

Disconnecting a wireless transmitter

To disconnect the xture from the currently paired wireless transmitter, go to SETTINGS → WIRELESS DMX → LOG OFF in the

menu.

Note: for POI versions, refer to “Disconnecting a wireless transmitter in POI” on page 18.

Signal priority

The P-6 can be paired to an active wireless transmitter simultaneously when connected to a cabled DMX. The xture will prioritize

cabled DMX over wireless DMX.

The active input type is displayed under the wireless signal strength indicator. The signal strength can be also checked via RDM data

by using a external RDM device (e.g. the SGM A-4).

NOTE: In POI version with wireless, the DMX signal strength can only be checked through RDM.

Connecting to a DMX control device

Figure 9: Display view

DMX

6CH MODE

(14)

A B C D

Otros manuales para P Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de SGM

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario