Page 5 of 52
www.sgm-lektra.eu
4-FEATURES
RPmag - features
Flow rate range
RPmag is able to process signals from fl uids with fl ow rates of up to 10m / s in both directions (bidirectional meter).
Range dimension / lining material
PTFE DN10 ÷ DN500
RUBBER DN65 ÷ DN2000
Sensor material
SS321
Housing material
aluminium
Electrodes material
SS316L - Hastelloy C - Titanium - Tantalum - Platinum
Measure range
<0,1m3/h ÷ >110000m3/h
Accuracy
±0,5% standard; ±0,2% optional
Repeatability
±0,1%
Fluid conductivity
>5μS/cm.
Power supply
85÷265Vac, 24Vdc, 12Vdc.
Consumption
6W, max. 8W.
Ambient Temperature Limits
Remote version operating temperature:
RUBBER -10 ÷ +80°C; PTFE -40 ÷ +150°C
Compact version operating temperature:
RUBBER -10 ÷ +80°C; PTFE -40 ÷ +100°C
Storage temperature: -40÷85°C
Communication protocol
modbus or Hart (opt.)
Output
4÷20mA: 0÷750 ohm load.
Frequency output: 0,1÷5000 Hz
Pulse output: 24Vdc pull up open collector or galvanically isolated open collector (opt.)
Alarm output: 2 relays, 3A 230Vac N.O. (not available for 12Vdc power supply version)
Reverse Flow
Allow measure reverse fl ow.
Output Testing
Current Source: Transmitter can be commanded to supply a specifi ed test current between 4.0 and 20.0 mA.
Frequency Source: Transmitter can be commanded to supply a specifi ed test frequency between 0.1 and 5000 Hz
Start-up Time
0.5 seconds.
Low Flow Cutoff
Adjustable between 0.0 and 9.9%Qmax. Below selected value, output is driven to the zero fl ow rate signal level.
Humidity Limits
0-100% RH to 150 °F (65 °C), not condensing.
Damping
Adjustable between 0.1 and 99 seconds.
Compact version IP rating
IP67
Remote version IP rating
sensor IP67 / IP68 (by request) - converter IP67
Anti-condensation fi lter
Anti-condensation fi lter installed on converter
