sewerin FLIS-EX Manual de usuario
24.01.2023 a – 104163 – en
FLIS-EX
Operating Instructions
Suction intake
Canister holder with
bayonet tting for
storing the hose
Motor protection switch
Exhaust opening
Fig. 1: Side view A
Fig. 2: Side view B
FLIS-EX
Nozzle
Clamping coil
Hose clip with lug
Hose (fabric)
Fig. 3: End of hose with bayonet tting
FLIS-EX
Illustration of warnings in this document
AWARNING!
Risk of personal injury. Could result in serious injury or death.
Contents │ I
1 General.....................................................................................1
1.1 Warranty ....................................................................................1
1.2 Purpose .....................................................................................2
1.3 Intended use .............................................................................2
2 Features ...................................................................................3
3 Operation .................................................................................4
3.1 Preparing the device .................................................................4
3.2 Switching the device on ............................................................5
3.3 Switching o the device.............................................................6
4 Maintenance and servicing ....................................................7
4.1 Visual inspection .......................................................................7
4.2 Cleaning ....................................................................................7
5 Transport, storage, storing the hose.....................................8
6 Appendix..................................................................................9
6.1 Technical data ...........................................................................9
6.2 Explosion protection ..................................................................9
6.3 Accessories .............................................................................10
6.4 Declaration of conformity .......................................................10
6.5 Inspection protocol ..................................................................11
1 General │ 1
1 General
1.1 Warranty
The following instructions must be complied with in order for
any warranty to be applicable regarding functionality and safe
operation of this equipment.
Hermann Sewerin GmbH accepts no liability for any damages
resulting from non-compliance with these instructions. The
warranty and liability provisions of the terms of sale and delivery
of Hermann Sewerin GmbH are not aected by the information
given below.
This product must only be operated after the
relevant operating instructions have been read
and understood.
●
This product must only be commissioned by qualied
professionals who are familiar with the legal requirements
(Germany: occupational health and safety regulations of the
BGI (Chemical Employer's Liability Insurance Association)).
● This product must only be used for its intended purpose.
●
This product is only suitable for use in industrial and commercial
applications.
●Repairs must only be carried out by a specialist technician or
by other suitably trained personnel.
● Changes or modications to this product must not be carried
out without approval from Hermann Sewerin GmbH. The
manufacturer cannot be held responsible for damages or
the explosion protection of the relevant model if unapproved
modications have been made.
● Only accessories supplied by Hermann Sewerin GmbH may
be used with this product.
●
All repairs must be carried out using replacement parts that
have been approved by Hermann Sewerin GmbH.
●
The manufacturer reserves the right to make technical
modications in the course of further development.
Generally applicable safety and accident prevention regulations
must be complied with, in addition to the information provided in
this manual.
2 │ 1 General
1.2 Purpose
Large volumes of CO2 can be released in well shafts and
ventilation and purge shafts as a result of pressure drops. High
concentrations of CO2in respiratory air leads to disorientation,
unconsciousness and death.
SEWERIN's FLIS-EX (FLIS for short) helps ventilate and purge
shafts.
1.3 Intended use
The following work can be performed in shafts with the FLIS:
● ventilating (supplying fresh air)
● purging (extracting harmful gases)
Always observe national regulations for the respective application
when using the FLIS. For example, in Germany please observe
the following:
● DGUV (German Social
Accident Insurance Institu-
tion) regulation 113-004
Working in tanks and conned
spaces
● DGUV provision 22 Accident prevention regulation
for wastewater engineering
plants
● DGUV regulation 103-003 Working in enclosed spaces in
wastewater engineering plants
● DGUV regulation 103-002 District heating distribution
plants
● DGUV principle 313-002 Selection, training and commis-
sioning of experts for measuring
pursuant to BGR 117 – part 1,
DGUV principle 313-002
● DGUV regulation 113-001 Explosion protection regulations
(Ex-RL)
The FLIS must not be used in oxygen-enriched atmospheres.
Otherwise the device will not be explosion-proof.
2 Features │ 3
2 Features
The FLIS has been constructed in accordance with the European
explosion protection standard ATEX 100a and complies with the
CENELEC recommendations.
The FLIS contains the following electrical equipment:
Type
EU type examination
certicate
Fan motor EeeA.. 56./.. PTB 03 ATEX 3004
Motor protection
switch
5823/8 DMT 01 ATEX E153 U
Starting/operating
capacitor
27 ... SEV17 ATEX 0165 X
The FLIS comes with:
● suction hose with cage
●extension hose
●extension hose in canister holder
The cage of the suction hose prevents dirt from getting into the
device (e.g. branches, leaves). Extension hoses do not have a
cage.
The hoses are attached to the FLIS using the bayonet tting and
secured with a buttery nut.
Hoses can be connected to each other. Using more than three
hoses can reduce the air volume of the FLIS.
4 │ 3 Operation
3 Operation
The FLIS can both ventilate and purge shafts. Either of the two
options is selected depending on:
● the type and size of the shaft
● the anticipated gases
●
the regulations of the responsible German Social Accident
Insurance Institution or other legal stipulations
AWARNING!
Risk of poisoning from toxic gases
Shafts may contain harmful toxic gases.
●
When purging, always wait the specied time before
entering the shaft (section 3.2).
●
Always measure the gas concentration before entering.
● Always take a gas measuring device into the shaft with
you, so that you can respond immediately if the suction
capacity of the FLIS is no longer sucient.
● Never switch o the FLIS if there is anyone in the shaft.
3.1 Preparing the device
Regardless of how the FLIS will be used (for ventilating or
purging), it is always prepared for use as follows:
1. Place the FLIS at the edge of the shaft.
− The FLIS must be stable and protected against shocks.
− Make sure that coarse dirt does not get into the FLIS de-
vice.
2. Open the inspection cover.
3. Attach the hoses.
− The table below contains information about the connection
options and the ways in which hoses can be combined.
− Tighten the buttery nuts on the nozzle to ensure a secure
mechanical and electrical contact.
3 Operation │ 5
4. Dangle the hoses in the shaft as follows.
− Ventilate: extension hose
− Purge: suction hose
The cage of the suction hose must be inside the shaft.
Connection options
Type of use Suction intake Exhaust opening
Ventilating 1 × 1 ×
or
2 ×
1 × + 1 × 1 ×
no hose 1 ×
or
2 ×
or
1 × + 1 ×
or
2 × + 1 ×
Purging 1 × no hose
or
1 ×
or
2 ×
1 × + 1 × no hose
or
1 ×
1 × + 2 × no hose
Suction hose Extension hose
Tabla de contenidos
Otros manuales de Instrumento de medición de sewerin
sewerin
sewerin SR2-EX-P Manual de usuario
sewerin
sewerin EX-TEC PM 4 Manual de usuario
sewerin
sewerin SeCorr 08 Manual de usuario
sewerin
sewerin Multitec 545 Manual de usuario
sewerin
sewerin VARIOTEC 480 EX Manual de usuario
sewerin
sewerin EX-TEC Combi Manual de usuario
sewerin
sewerin Stethophon 04 Manual de usuario
sewerin
sewerin Multitec 520 Manual de usuario
sewerin
sewerin Multitec 560 Manual de usuario
sewerin
sewerin miniLec 4 Manual de usuario
sewerin
sewerin Multitec 540 Manual de usuario
sewerin
sewerin UT 9000 Manual de usuario
sewerin
sewerin VARIOTEC 460 Tracergas Manual de usuario
sewerin
sewerin SPE 2 Manual de usuario
sewerin
sewerin EX-Tec HS 680 Manual de usuario
sewerin
sewerin SeCorrPhon AC 200 Manual de usuario
sewerin
sewerin COMBIPHON Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario