SEVEN DOCKUSBC Manual de usuario
DOCKUSBC
www.v7world.com
Copyright
This document contains proprietary information
protected by copyright. All rights reserved. No part of
this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior
written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the
property of their respective owners or companies.
Package Contents
• Docking Station
• USB-C Cable (connect computer to Docking Station)
• Power Adapter
• User’s Manual
INTRO
IMPORTANT
• Check www.v7world.com for the latest downloads
for this product
• Confirm that you are connecting the Docking Station
with the supplied USB cable to the fastest USB port available
on your computer (USB-C or USB 3.2 Gen 1 or greater)
• Confirm you are using the power supply that came with
your docking station
• Confirm all of your cables and devices are working properly
by using them directly connected to your computer
• Confirm you are using the latest software from DisplayLink:
www.displaylink.com/downloads
• Confirm you are using the latest software and drivers from
the manufacturer of the computer including Chipset
Drivers, Firmware Updates, Bios, etc.
• Confirm your computer’s operating system power saving
mode setting is not set to turn off USB connectivity. This can
results in USB input devices being ignored during sleep mode
so you can’t wake up your computer.
• Other troubleshooting: support.displaylink.com
Still having trouble?
Contact our customer service team at www.v7world.com
OVERVIEW
FRONT
For connecting to Mic and headphone.
One is for Type-A peripherals connection.
The other one is for fast charging.
For connecting to USB-C peripherals.
1
2
3
Two USB 3.2 Gen 1 Type-A ports
3.5mm Mic input port
Two USB-C ports
123
OVERVIEW
BACK
1 2 3 4 5 6 7 8
For connecting to 2K HDMI monitor.
For connecting to Gigabit Ethernet network.
For connecting to 2K DVI monitor.
For connecting to 4K HDMI monitor.
For connecting to the laptop.
External power supply for dock operation.
For connecting to Type-A peripherals.
1
2
3
4
5
6
7
8
Safety Lock
Two USB 3.2 Gen 1 Type-A ports
HDMI (Displaylink) Port
DVI (Displaylink) Port
10/100/1000Mbps Ethernet port
HDMI (Alt-Mode) Port
USB-C port (Upstream port)
Power Jack
SPECIFICATION
Connectors HDMI 1.4 x 2
DVI x 1
USBA 3.2 Gen 1 x 4
USB-C x 3
RJ45 Ethernet
3.5mm headset
microphone combo
Video Resolution HDMI Port1: 2K Display
HDMI Port2: 4K Display
DVI Port: 2K display
Ethernet Speed 10/100/1000 Mbps
Audio 3.5 mm TRS
Input Voltage 100-240V AC
Output Voltage 12V/2.00A
Operating Temperature 0 to 35 C
Storage Temperature -10 to 70 C
Safety & Compliance CE, FCC, ROHS
Product Safety Instructions:
Read this guide for important safety and health information and for regulatory information.
Warning: Failure to properly set up, use, and care for this product can increase the risk of serious injury or
death, or damage to the device or devices. Read this instruction and keep all printed manuals, instruction
for future references. This Product Safety Instructions includes important information about many V7
products. Refer to sections that apply to the feature of your device.
AC Powered Devices: These precautions apply to all products that plug into a standard wall power outlet.
Failure to take the following precautions can result in serious injury or death from electric shock or re or
in damage to the device.
To select an appropriate power source for your device:
• Use only the power supply unit and AC power cord that came with your device or that you received
from an authorized repair center.
• Conrm that your electrical outlet provides the type of power indicated on the power supply unit
(in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your
home, consult qualied electrician.
• Do not use non-standard power sources, such as generators or inverters, even if the voltage and
frequency appear acceptable. Only use AC power provided by a standard wall outlet.
• Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Conrm
that they are rated to handle the total current (in Amps [A]) drawn by the device (indicated on the
power supply unit) and any other devices that are on the same circuit.
• To prevent damaging the power cords and power supply:
• Protect the power cords from being walked on.
• Protect cords from being pinched or sharply bent, particularly where they connect to the power
outlet, the power supply unit, and the device.
• Do no jerk, knot, sharply bend, or otherwise abuse the power cords.
• Do not expose the power cords to sources of heat.
• Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
• When disconnecting the power cord, pull the plug – do not pull on the cord.
• Unplug this power cord during lightning storms or when unused for a long period of time.
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug
your device during lightning storms or when unused for long periods of time. For devices with an AC
power cord that connects to the power supply or the equipment itself, always connect the power cord
accordingly to the following instructions:
• Plug the AC power cord into the power supply unit or the equipment itself until it stops.
• Plug the other end of the AC power cord into the wall outlet.
Do not attempt repairs. Do not attempt to take apart, disassemble, service, or modify the hardware
device or power supply. Doing so could present risk of electronic shock or other hazard. Any evidence of
any attempt to dissemble and/or modify the device, including peeling, puncturing, or removal of any of
the labels, will void the Limited Warranty.
Do not abuse the device: Do not immerse the device to any liquid or expose to moisture. Clean only with
dry cloth. Do not use the device outside the specied operating temperature range of 5°C (41°F) to 35°C
(95°F). If the device is exposed to environment outside of its prescribed operation, turn o the device and
allow the temperature to stabilize within the specied operating range before using the device.
DOCKUSBC
www.v7world.com
Copyright
Dieses Dokument enthält firmeneigene, urheberrechtlich
geschützte Informationen. Alle Rechte vorbehalten.
Kein Teil dieses Handbuchs darf ohne vorherige
schriftliche Genehmigung des Herstellers mechanisch,
elektronisch oder durch andere Mittel in irgendeiner
Form reproduziert werden.
Trademarks
Alle Marken und eingetragenen Marken sind Eigentum
ihrer jeweiligen Besitzer oder Unternehmen.
Verpackungsinhalt
• Docking Station
• USB-C-Kabel (Anschluss von Computer an Docking Station)
• Netzadapter
• Benutzerhandbuch
EINFÜHRUNG
WICHTIG:
• Informieren Sie sich auf www.v7world.com über die neuesten
Updates für dieses Produkt.
• Die Dockingstation muss mit dem mitgelieferten USB-Kabel
an den schnellsten USB-Anschluss des Computers angeschlossen
werden (USB-C, USB 3.2 Gen 1 oder höher).
• Verwenden Sie nur das mitgelieferte Netzteil.
• Prüfen Sie, ob alle Kabel und Geräte einwandfrei funktionieren,
indem Sie diese direkt an den Computer anschließen.
• Verwenden Sie immer nur die aktuelle Version der DisplayLink-
Software. Diese finden Sie auf www.displaylink.com/downloads.
• Verwenden Sie die aktuellste Software und die aktuellsten
Treiber des Computerherstellers (Chipsatz-Treiber, Firmware-
Updates, Bios usw.).
• Prüfen Sie, ob der Energiesparmodus des Computer-Betriebssystems
eingeschaltet ist und deshalb die USB-Anschlüsse deaktiviert sind. In
diesem Fall werden USB-Geräte möglicherweise nicht erkannt, sodass
Ihr Computer nicht aus dem Ruhemodus umschaltet.
• Weitere Informationen zur Fehlerbehebung: support.displaylink.com
.
Konnten Sie das Problem nicht lösen oder haben Sie weitere Fragen?
Wenden Sie sich an unseren Kundenservice auf www.v7world.com.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Estación de acoplamiento de SEVEN
