Serene Classic Manual de usuario

Serene ‘Classic’

Rails

Heated Ladder Towel Rails - Curved

User Manual

PRN2169Rev.4.0Aug.2013

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

Contents

1 Safety Information ........................ 3

2 Installation ..................................4

Wiring .............................................. 4

Distances ......................................... 4

To Install the Towel Rail ..................... 4

3 Operation .................................... 7

4 Specifications ...............................7

Dimensions ........................................... 7

Electrical ............................................. 7

Construction .......................................... 7

5 Maintenance ............................... 8

6 Contact Addresses ..................... 8

Serene Industries Limited reserve the right to alter specifications without notice.

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

1 Safety Information

When using any electrical appliance, safety precautions should always

be observed. Read these instructions carefully before installation and

retain for future reference.

This appliance is intended to dry towels and therefore is hot to the

touch. When used by or near young children or infirm persons,

close supervision is necessary. Young children should be

supervised to ensure that they do not play with the appliance.

Any rise in ambient temperature is directly reflected in the

appliance and as a result of this the appliance willfeel hotter to the

touch during warmer periods. The insulation effect of towels will

also cause the operating temperature to increase.

Use this appliance only on the voltage specified on the rating label.

Regulations require that electrical work be carried out only by

authorised persons. For your own safety, and that of others,

ensure this is done.

To avoid a hazard for young children, this appliance

MUST

installed so that the bottom rail is at least 600mm above the floor.

To avoid a hazard this heated towel rail

MUST NOT

be used to

carrytowelsor any other articlesthat have been in contact with oil,

petroleum based products or dry cleaning fluids.

Do

NOT

use this appliance other than for its intended use.

Do

NOT

immerse in any liquid.

Do

NOT

allow the power supplycord to come into contact with

heated surfaces during operation.

Caution:

If this appliance is supplied from a cord extension set or an electrical

portable outlet device, the cord extension set or electrical portable

device must be positioned so that it is not subject to splashing or

ingress of moisture.

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

2 Installation

This appliance

MUST

be installed in accordance with the relevant

wiring rules and regulations which cover installation of appliances and

accessories in damp situations such as bathrooms, showers, laundries

and other areas with fixed water containers (in Australia and New

Zealand - AS/NZS 3000: 2000 Wiring Rules).

Wiring

The Heated Ladder Towel Rail is supplied with a 900mm supply cord

and plug. This Class II appliance does

NOT

require Earthing. Where

protected by an RCD, the Heated Towel Rail can be plugged directly

into a socket outlet, otherwise permanent connection to the supply via

a permanent connection unit is required. On directly wired models, a

suitable disconnection device (acting in all supplies)

MUST

incorporated in the fixed supply wiring.

Distances

In order to avoid a hazard for young children, this appliance

MUST

installed so that the bottom rail is at least 600mm above the floor.

Theside frames of the Towel Railshould be mounted vertically, with the

heated rails horizontal and the supply cord at the bottom.

To Install the Towel Rail

1. Remove allthe packingmaterialfrom around the towel rail and

retrieve the fixing screws and adhesive dots from inside the

plastic bag taped to the power cord.

2. Establish a suitable position on the wall for attaching the towel

rail, with at least two of the leg mounting brackets aligned with

wall studs or dwangs.

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

Remove all four of the mounting

brackets from the towel rail frame by

undoing the small hexagon socket

screw under each leg. Be careful not to

lose the screws.

Mark the location of ONE of the

mounting brackets on the wall.

Drill a hole centrally at the marked

location and fix the mounting bracket

to the wall, either using a wall fixing

screw (supplied) or a suitable wall

fixing plug.

Attach one of the adhesive dots

(supplied) to the back of each of the

remaining three mounting brackets

and remove the protective paper

backing.

Insert the remaining three mounting

brackets into the frame mounting legs.

Ensure the rectangular fixing slot, in

each mounting bracket, faces

downwards so as to correctly align with

the fixing hole in each of the frame

legs.

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

8. Position the corresponding towel rail

frame leg onto the mounting bracket

already attached to the wall. If

necessary, use a level to align the

towel railin the desired position, before

pressing firmly against the frame to

adhere the remaining three mounting

brackets to the wall.

9. Pull the frame away, leaving the

mounting brackets attached to the wall.

10. Drill and attach the remaining three

mounting brackets to the wall using

either the three wall fixing screws

(supplied) or suitable wall fixing plugs.

11. Refit the towel rail frame over the

mounting brackets and lock in place

with the four small hexagon socket

screws.

12. Either connect the supply cord to a

socket outlet or, if installed in a

bathroom, have an authorised person

connect the supply cord to a switched

permanent connection unit.

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

3 Operation

The Heated Ladder Towel Rail will take approximately 45 minutes to

reach normal operating temperature and, if need be, can be left running

continuously. The Heated Ladder Towel Rail costs approximately the

same to run as a 100 Watt light bulb.

4 Spe c i f i ca ti o n s

Dimensions

Model

SLTR5SS

SLTR7SS

SLTR9SS

SLTR11SS

Height:

560mm

805mm

1040mm

1280mm

Width:

630mm

Depth:

125mm

Weight:

2.0 kg

2.5 kg

3.1 kg

3.8 kg

Electrical

Supply: 230-240 Volts a.c. 50 Hz

Wattage: 45-50 W 65-70 W 87-95 W 105-115 W

Insulation Class: Class II - Double Insulated

Wiring: 900mm 2-core supply cord and plug. The plug may be

removed for connection to permanent wiring.

Controls: No controls provided. Designed for continuous

operation. The LEDindicates when the towel rail is

operating.

Const r uc ti on

Ingress Protection Rating: IP34 –Splash proof

Finish: Polished stainless steel frame, with chrome plated

fittings, and white supply cord and plug.

Table 1: Specifications

C l a s s i c S e r i e s

SERENE Heated Ladder Towel Rails

5 Maintenance

The Heated Ladder Towel Rail is best wiped down from time to time

with a damp cloth. Do

NOT

use any abrasive or corrosive cleaners.

The supply cord on this product cannot be replaced without damaging

the appliance. If the supply cord becomes damaged in any way, the

appliance should be scrapped. If the appliance is under warranty,

contact Serene Industries Limited.

Tabla de contenidos

Otros manuales de Calentador de Serene

Serene

Serene S2067 Manual de usuario

Serene

Serene S2077 Manual de usuario

Serene

Serene S2059 Instrucciones de funcionamiento

Serene

Serene S2066 Manual de usuario

Serene

Serene S2033 Manual

Serene

Serene S2088 Manual de usuario

Serene

Serene S2068 Manual de usuario

Serene

Serene S2044 Manual

Serene

Serene S2212 Manual

Serene

Serene S2077 Manual de usuario

Serene

Serene Sirio S2029 Manual

Serene

Serene S6069 Apollo Manual de usuario

Serene

Serene S2026 Manual

Serene

Serene S2022 Manual de instrucciones

Serene

Serene S6068 Sorroco Manual de usuario

Serene

Serene S2044 ROMA Manual de usuario

Serene

Serene S2077 Manual de usuario

Serene

Serene Optima S2055 Manual de usuario

Manuales populares de Calentador de otras marcas

oventrop

oventrop Regucor Series Manual de usuario

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manual de usuario

ELMEKO

ELMEKO ML 150 Manual de usuario

BN Thermic

BN Thermic 830T Manual de usuario

KING

KING K Series Guía

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guía de inicio rápido

Well Straler

Well Straler RC-16B Manual de usuario

EUROM

EUROM 333299 Manual de usuario

Heylo

Heylo K 170 Manual de usuario

Eterna

Eterna TR70W Manual de usuario

Clarke

Clarke GRH15 Manual de instrucciones

IRSAP

IRSAP The Radiator Company Ovali Manual de usuario

Empire Heating Systems

Empire Heating Systems WCC65 Manual de usuario

Wetekom

Wetekom 92 86 43 Manual de usuario

Desa

Desa SPC170-F Manual de usuario

Watlow

Watlow Watrod Electric Tubular Heaters Manual de usuario

Haverland

Haverland ECO-DRY GPS Series Manual de lista de piezas

Stelpro

Stelpro ASILVC2060 Series Manual de usuario