May 2006
H100P
Pulling force over the rope length
Pulling
force
(tonnes) Rope speed
(m/min)
Total Rope
on the
drum (m)
1st 10,0 9,0 13,0
2nd 8,8 10,5 27,8
3rd 7,8 11,5 44,4
4th 7,0 13,0 62,8
Mounting instructions
The winch should be mounted on a 16 mm
steel mounting plate fixed to the vehicle.
The winch must be fitted to the mounting
plate with 8 bolts M6S M16x40 (hot
galvanized) minimum quality 8.8.
Tightening torque 210 Nm (21 kpm) when
oiled.
Hydraulic installation
Declaration of Conformity
According to the Machine Directive 98/37/EC, Annex IIA
Sepson AB, P.O. Box 172, SE-780 50 Vansbro, Sweden declare under our sole responsibility that:
The winch type 73.09 with serial numbers 110-770
- are manufactured according to the Machine Directive 98/37/EC
-are manufactured according to following harmonized standards – EN 292-1 and 2
Vansbro December 9, 2005. Sepson AB Ulf Jons Designer
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
0,0 10,0 20,0 30,0 40,0 50,0 60,
Total rope on the drum in metres
Pulling force in tonnes
