SenTech STC-1100C Manual de usuario

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 1

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com

Double Speed

B&W Progressive Scan Camera

with

Variable Integration Random Shutter Trigger

and Vertical Reset

STC-1100C & STC-1100D

Operating Manual

(Positive Enabled Trigger Pulse Input) (Negative Enabled Trigger Pulse Input)

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 2

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 3

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

Precaution ............................................................................... 4

1. Specifications ..................................................................... 5

2. 12 Pin Connector .................................................................. 6

3. Switch Settings .................................................................... 7

4. Input Output Signals ....................................................... 10

5. Variable Integration Shutter Trigger Operations ................... 11

6. Vertical Reset Operations ...................................................... 13

7. Dimensions .......................................................................... 15

Table of Contents

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 4

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

Precaution

• Handle the camera with care. Do not abuse the camera. Avoid striking or

shaking it. Improper handling or storage could damage the camera.

• Do not pull or damage camera cable.

• During camera use, do not wrap the camera unit in any material. This will

cause the internal temperature of the unit to increase.

• Do not operate camera in wet areas and do not expose camera to

moisture.

• Do not operate camera beyond its maximum operating temperature,

humidity and power source ratings.

• To prevent dust or contamination from entering the CCD or filter area,

which could scratch or damage this area, keep lens or lens cap on camera

when camera is not in use.

• Do not expose the camera to the following conditions:

- Wet, moist and/or high humidity areas

- Hot direct sunlight

- High temperature areas

- Near objects that release strong magnetic or electric fields

- Strong vibration

• When cleaning the camera, use a soft cloth to clean the external areas of

the camera. Use a pressured air spray to clean the surface of the glass.

Do not scratch the surface of the glass.

• Use only a REGULATED POWER SUPPLY and supply the power with the

specified voltage.

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 5

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

1. Specifications

Image Sensor: 1/3” IT CCD

Effective Picture Element: 659(H) x 494(V)

Optical Black: Horizontal: 33 pixel

Vertical: 10 pixel

Chip Size: 5.84mm(H) x 4.94mm(V)

Cell Size: 7.4µm(H) x 7.4µm(V)

Scanning Area: 4.88mm(H) x 3.66mm(V)

Sync. System: Internal/External (HD & VD) Switchable

CCD V. Drive Frequency: Double Speed: 31.468KHz ±1%

Normal Speed: 15.734KHz ± 1%

CCD H. Drive Frequency: Double Speed: 24.5454MHz ± 1%

Normal Speed: 12.2727MHz ± 1%

Horizontal Resolution: 495 TVL

Vertical Resolution: 495 TVL

Scanning System: 525 Lines Progressive Scan or 2:1 Interlace

Scanning Frequency: Double Speed Pregressive: 59.94Hz(V), 31.468KHz(H)

Normal Speed Progressive: 29.97Hz(V), 15.734KHz(H)

Double Speed 2:1 Interlace: 119.88Hz(V), 31.468KHz(H)

Normal Speed 2:1 Interlace: 59.94Hz(V), 15.734KHz(H)

Minimum Illumination: Normal Speed:1 Lux @ F1.4

Double Speed: 2 Lux @ F1.4

S/N Ratio: >56dB

Gamma: 0.45 or 1 (Switchable)

Lens Mount: C-Mount

Gain: Manual/Fixed/Auto Gain Switchable

Shutter Speed: Normal: (8 Steps) 1/60 ~ 1/10,000 sec

Double: (8 Steps) 1/120 ~ 1/20,000 sec

Trigger Modes: One Pulse Variable Integration Shutter Trigger

STC-1100C : Positive Enabled Pulse Input

STC-1100D: Negative Enabled Pulse Input

Video Out: 1.0 Vp-p / 75Ω

Power Voltage: 10 - 14Vdc

Power Consumption: Normal Speed: 180mA

Double Speed: 210mA

Ambient Temperature: -10°C ± 50°C (14°F ± 122°F)

Dimensions: 31(W) x 29(H) x 73(D)mm (1.24” x 1.16” x 2.92”)

Weight: 85g

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 6

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

2. 12-Pin Connector Assignment

Note: Mating Connector: Hirose HR10-A-10P-12S

Pin No. Internal Sync External Sync

HD/VD Trigger Shutter

1 GND GND GND

2 +12Vdc +12Vdc +12Vdc

3 Video GND Video GND Video GND

4 Video Out Video Out Video Out

5 HD GND HD GND HD GND

6 Int. HD Out Ext. HD In Ext. HD In

7 Int. VD Out Ext. VD In

8 M-Trig GND

9 M-Trig In

10 GND GND

12 VD GND VD GND GND

Notes:

1) Internal Sync Mode or External Sync Mode can be selected by the switch

described in 3b.

When the External Sync Mode is selected and no external horizontal drive signal

(HD) is applied, the camera switches to internal sync mode automatically.

2) “M-trig In (Main Trigger Input)” is used for the variable integration shutter

trigger input and for:

3) The main trigger pulse input described in 4b.

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 7

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

3. Switch Settings

a.) Fixed/Manual Gain Switch

b.) Sync Mode Switch

c.) DIP Switch

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 8

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

Switch No. Position Function

1 ON Progressive Mode

OFF 2:1 Interlace

2 ON Normal (Internal or External Sync)

OFF Variable Integration Shutter Trigger

3 ON Normal Speed

OFF Double Speed

4 ON Manual or Fixed Gain Control

OFF Auto Gain Control

5 Shutter Speed (See the following chart)

6 Shutter Speed (See the following chart)

7 Shutter Speed (See the following chart)

8 Shutter Speed (See the following chart)

9 Shutter Speed (See the following chart)

10 ON N/A

OFF One-Pulse Variable Integration Shutter Trigger

Mode Switch Number Shutter Speed (Sec.)

56789Normal Speed Double Speed

Flicker Less ON ON 1/100 1/200

OFF OFF OFF Shutter OFF (Note 1) Shutter OFF (Note 2)

ON OFF OFF OFF OFF 1/60 1/120

ON OFF ON OFF OFF 1/125 1/250

High Speed ON OFF OFF ON OFF 1/250 1/500

Shutter ON OFF ON ON OFF 1/500 1/1000

ON OFF OFF OFF ON 1/1000 1/2000

ON OFF ON OFF ON 1/2000 1/4000

ON OFF OFF ON ON 1/4000 1/8000

ON OFF ON ON ON 1/10000 1/20000

d.) DIP Switch Functions

Important: DIP Switch No. 5 must be turned ON and No.6 must be turned OFF when the

camera operates in the “Variable Integration Shutter Trigger Mode”.

e.) DIP Switch Functions

Notes:

1. 1/30sec in Normal Speed Progressive Mode, 1/60sec in Normal Speed Interlace Mode

2. 1/60sec in Double Speed Progressive Mode, 1/120sec in DOuble Speed Interlace Mode

Important: DIP Switch No.5 must be turned ON and No.6 must be turned OFF when the camera operates

in the “Variable Integration Shutter Trigger Mode”.

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 9

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

f.) Input Signal Impedence Switch

Notes:

1. This impedence switch controls both HD and VD input impedence.

2. Set this switch to “High Impedence” when the camera is used in the

variable integration shutter trigger mode.

g.) Camera Correction Switch

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com 10

STC-1100C & STC-1100D Series

Operating Manual

Rev. 0.2 - Updated September 26, 2005

4. Input Output Signals

a) External Sync Input Signals

I) HD

Input Signal Level: 2-5Vp-p

Termination Impedence: 75Ωor high impedence

Sync Frequency: 15.734KHz ± 1% (Normal Speed Progressive)

31.468KHz ± 1% (Double Speed Progressive)

15.734KHz ± 1% (Normal Speed 2:1 Interlace)

31.468KHz ± 1% (Double Speed 2:1 Interlace)

II) VD

Input Signal Level: 2-5Vp-p

Termination Impedence: 75Ωor high impedence

Sync Frequency: 29.97Hz (Normal Speed Progressive)

59.94Hz (Double Speed Progressive)

59.94Hz (Normal Speed 2:1 Interlace)

119.88Hz (Double Speed 2:1 Interlace)

b) Sync Output Signals

I) HD

Input Signal Level: 2-5Vp-p at 75Ω termination

5 Vp-p at high impedence

Termination Impedence: 75Ωor high impedence

Sync Frequency: 15.734KHz ± 1% (Normal Speed Progressive)

31.468KHz ± 1% (Double Speed Progressive)

15.734KHz ± 1% (Normal Speed 2:1 Interlace)

31.468KHz ± 1% (Double Speed 2:1 Interlace)

II) VD

Input Signal Level: 2 Vp-p at 75Ω termination

5 Vp-p at high impedence

Termination Impedence: 75Ωor high impedence

Sync Frequency: 29.97Hz (Normal Speed Progressive)

59.94Hz (Double Speed Progressive)

59.94Hz (Normal Speed 2:1 Interlace)

119.88Hz (Double Speed 2:1 Interlace)

c) Variable Integration Shutter Trigger Input Signals

Low Level: 0-0.5V

High Level: 4-5V

Pulse Duration: Please see section 3

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de SenTech

SenTech

SenTech STC-400 Series Manual de usuario

SenTech

SenTech STC-GE33OX Manual de usuario

SenTech

SenTech STC-400 Series Manual de usuario

SenTech

SenTech STC-C42A Manual del propietario

SenTech

SenTech STC-TB83USB-ASH Manual de usuario

SenTech

SenTech STC-A33A Manual de usuario

SenTech

SenTech STC-CL500E Manual de usuario

SenTech

SenTech STC-GE83A Manual de usuario

SenTech

SenTech STC-SCS231POE Instrucciones de instalación

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario