Senstar Stellar 100 Manual

Operator’s

DA-030203-09, Rev G

Ninth edition

March 22, 2002

Senstar 100®

Alarm annunciation and control system

guide

(Version 5.3)

Senstar-Stellar locations

Canada

Senstar-Stellar Corp.

119 John Cavanaugh Drive

Carp, Ontario

Canada K0A 1L0

Telephone: (613) 839-5572

Fax: (613) 839-5830

USA

Senstar-Stellar, Inc.

43184 Osgood Road

Fremont, CA

USA 94539

Telephone: (510) 440-1000

1-800-676-3300

Fax: (510) 440-8686

Website: www.senstarstellar.com

Senstar-Stellar Ltd.

Orchard House

Evesham Road

Broadway, Worcs.

U.K. WR12 7HU

Telephone: +(44) (1386) 834433

Fax: +(44) (1386) 834477

Europe

Senstar GmbH

Riedheimer Str. 8

D-88677 Markdorf

Germany

Telephone: +(49) (7544) 95910

Fax: +(49) (7544) 959129

email: info@senstarstellar.com

Latin America

Senstar-Stellar Latin America

Pradera No. 214

Col. Pradera

Cuernavaca, Morelos

62170, Mexico

Telephone: +(52) (777) 313-0288

Fax: +(52) (777) 317-0364

DA-030203-09, Rev G

Ninth Edition

Senstar 100 and Sentrax are registered trademarks of Senstar-Stellar Corporation. Senstar-Stellar, the

Senstar-Stellar logo and S∞Trax are trademarks of Senstar-Stellar Corporation.

QNX is a registered trademark of QNX Software Systems Ltd.

IBM is a registered trademark of International Business Machines.

Hostess 550 is a trademark of Comtrol Corporation.

The information provided in this guide has been prepared by Senstar-Stellar Corporation to the best of its

ability. Senstar-Stellar Corporation is not responsible for any damage or accidents that may occur due to

information about items of equipment or components not manufactured by Senstar-Stellar Corporation.

Features and specifications are subject to change without notice.

Senstar-Stellar Corporation intellectual property is protected by the following patents:

CANADA No.: 1216340, 1332185

U.S. No.: 4562428, 4987394, 5247270

U.K. No.: 2120823, 2163580, 2165681

Patents pending in many other countries.

operator’s guide ••• toc-1

Table of contents

Introduction to Senstar 100

Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 1

The Senstar 100 system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 2

Senstar 100 system menus - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 3

Entering commands- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 6

Senstar 100 screen display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 7

Maps and map symbols - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 10

Processing alarms

Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 1

Types of alarms- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 2

Alarm priorities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 4

Displaying CCTV camera views (option) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 7

Responding to alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 8

How to process alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 11

Processing sensor alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 12

Processing equipment alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 20

Processing notification alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 - 24

Processing alarms at the Sennet control panel- - - - - - - - - - - - - - - - - - - - - - - - - 2 - 26

Routine operation

Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 1

Operator menu display- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 5

Displaying maps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 7

Displaying camera views (option) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 12

Editing the automatic camera stepping sequence - - - - - - - - - - - - - - - - - - - - - - - 3 - 21

Displaying concealed maps (option) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 28

Accessing or securing sensors and control points- - - - - - - - - - - - - - - - - - - - - - - - 3 - 30

Performing a sensor test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 37

Clearing alarms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 39

Displaying the checklist - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 43

Logging off - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 45

Glossary

Index

operator’s guide ••• 1-1

1Introduction to Senstar 100

Overview

This chapter introduces Senstar 100. It describes:

• the Senstar 100 menus

• how the Senstar 100 screens are organized

• how to enter commands

• Senstar 100 site maps

introductiontoSenstar100

1-2 ••• operator’sguide

The Senstar 100 system

Senstar 100 is an alarm annunciation and control system that lets you

monitor your site from a personal computer. With Senstar 100, you

display your site information on color-coded maps, and control your

system through the use of menus and function keys.

You are guided logically through system operation by a series of menus.

The touch screen makes it easy to enter commands and respond quickly

to alarm situations simply by touching the screen. The menu functions

can also be accessed by using a mouse or trackball in place of the touch

screen.

Senstar 100 also provides you with help screens that give you information

about the functions you’re using.

introductiontoSenstar100

operator’s guide • • • 1-3

Senstar 100 system menus

The screen below displays the Senstar 100 main menu. It provides access

to the four system menus:

•Operator

•Supervisor

•Maintenance

•Setup

If the system is configured for two-language operation, the Lang function

also appears. The Lang function toggles between the two languages

configured for the system.

The term Lang is the generic term used for the

language function. The system might display the

actual name of the language used by the system.

Depending on how your system is set up, the system menus could be

displayed on one color monitor, split between a color and a

monochrome monitor, or split between two color monitors. If the menus

are displayed on one monitor, they will appear as shown below.

introductiontoSenstar100

1-4 ••• operator’sguide

The menu titles and function keys shown here

display the language and terminology used

when the Senstar 100 system is shipped. Your

system may be set up to use different

terminology; consult with your supervisor.

If the system menus are displayed on two monitors, they will appear as

shown.

introductiontoSenstar100

operator’s guide • • • 1-5

Certain menus may be protected with passwords, and you may or may

not have access to these menus. If you select a menu accidentally and a

password screen or the menu screen appears, press the Quit function

and return to the main menu.

If the Senstar 100 main menu is displayed on the monitor, and you don’t

touch any of the functions for five minutes, the information on the

monitor disappears, and only the date and time are displayed moving

around the screen. If you touch the screen, the main menu reappears. If

an alarm occurs, it is automatically displayed on the monitor.

introductiontoSenstar100

1-6 ••• operator’sguide

Entering commands

Senstar 100 commands are displayed in boxes along the bottom of the

screen. To select a command, touch the box. If you have a two-monitor

system, the boxes on the secondary screen are displayed with the

corresponding function key. Press the function key on the keyboard to

select the function. If your secondary monitor is disabled (i.e., all menus

are displayed on the primary monitor), the function keys are displayed on

the primary monitor.

This manual assumes that you have a touch

screen and that the system menus are displayed

on two monitors.

Other areas of the screen can also be touched to activate certain

commands. For example, to scroll through maps, touch the map name in

the top left corner. To select a zone, touch the zone on the screen. These

features are explained in more detail in the following section.

Tabla de contenidos

Otros manuales de Sistema de seguridad de Senstar Stellar

Senstar Stellar

Senstar Stellar Flash Guía del usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario