Sensing TEK Gateway User manual V1.0
5
Installation ( for quickly setting)
GatewayConnect DC power supply after about 30 seconds: normal operation, Please note the following new
devices what time :
1. Wi-Fifunctionality is not turned on , use a cable way to do set up for the first time.
2. LAN's factory default IP to 192.168.5.1
3. User ID:Admin / password:123456
First,Gateway connection setting
1. Use a CAT5 network cable , one end connected Gateway LAN, connect one end of your network card .
2. Open up your Control Panel > network and sharing Center > change adapter settings > you are connected
to the network card > right mouse button.
3. Confirm that your network card is the IPv4 DHCP ( Automatic IP, Gateway distribution ).
4. Or manually set to the 192.168.5.X segments (the x stands for any number, not with the same equipment,
such as2~199).
5. Open your browser (IE or Chome )
6. At the URL input 192.168.5.1(Gateway IP), and press Enter.
7. Show login authentication screen, enter your account number:Admin password:123456
8. Login complete show Gateway present information, as well as set menus.
Second, theGatway basic configuration settings
※HES Settings > Basic Settings
Product Name: This way you can freely enter the project name ( limited English and Arabic numerals )
Location: Improvised narrative installation ( limited English and Arabic numerals )
※HES Settings > Server Settings
Enable Management Server (this option Select the checkbox to enable this feature )
Auto Account Generation (not checked, logged in using a personal account )
