Sennheiser SR 300 IEM Manual de usuario

Contents

Important safety instructions ............................................................................................................................... 2

The evolution wireless series ew 300 IEM G3 ...................................................................................................... 4

The SR 300 IEM rack-mount transmitter .............................................................................................................. 4

The frequency bank system .................................................................................................................................... 4

Delivery includes ..................................................................................................................................................... 5

Product overview .................................................................................................................................................... 6

Overview of the SR 300 IEM transmitter .............................................................................................................. 6

Overview of the displays .......................................................................................................................................... 7

Putting the transmitter into operation ............................................................................................................... 8

Preparing the transmitter for use .......................................................................................................................... 8

Connecting external devices ................................................................................................................................ 11

Connecting transmitters in a network ............................................................................................................... 12

Connecting the mains unit ................................................................................................................................... 12

Using the transmitter .......................................................................................................................................... 13

Switching the transmitter on/off ....................................................................................................................... 13

Monitoring the audio signal via headphones ................................................................................................... 13

Synchronizing a receiver with the transmitter ................................................................................................ 14

Adjusting the audio channels .............................................................................................................................. 15

Daisy-chaining audio signals ............................................................................................................................... 15

Deactivating the lock mode temporarily ........................................................................................................... 16

Activating/deactivating the RF signal ............................................................................................................... 16

Using the operating menu .................................................................................................................................. 17

The buttons ............................................................................................................................................................. 17

Overview of the operating menu ........................................................................................................................ 17

Adjustment tips .................................................................................................................................................... 19

Synchronizing the transmitter with a receiver ................................................................................................ 19

Cleaning the transmitter ..................................................................................................................................... 20

If a problem occurs ... ........................................................................................................................................... 21

Specifications ........................................................................................................................................................ 22

Manufacturer Declarations ................................................................................................................................. 24

For more detailed information on the individual sections of this instruction manual, visit the

corresponding product page on our website at www.sennheiser.com.

Important safety instructions

• Read this instruction manual.

• Keep this instruction manual. Always include this instruction manual when passing the

device and the mains unit on to third parties.

• Heed all warnings and follow all instructions in this instruction manual.

• Only clean the device and the mains unit when they are not connected to the mains. Use a

cloth for cleaning.

• Never open the device, otherwise you can receive an electric shock. If devices are opened

by customers in breach of this instruction, the warranty becomes null and void.

• Refer all servicing to qualified service personnel.

Servicing is required if the device or the mains unit have been damaged in any way, liquid

has been spilled, objects have fallen inside, the device or the mains unit have been exposed

to rain or moisture, do not operate properly or have been dropped.

• WARNING: To reduce the risk of fire or electric shock, do not use the device and the mains

unit near water and do not expose them to rain or moisture. Do not place objects filled with

liquids, such as vases or coffee cups, on the device.

• Unplug the mains unit from the wall socket.

• Unplug the mains unit from the wall socket

– to completely disconnect the device from the mains,

– during lightning storms or

– when unused for long periods of time.

• Only operate the mains unit from the type of power source specified in the chapter

“Specifications” (see page 22).

• Ensure that the mains unit is

– in a safe operating condition and easily accessible,

– properly plugged into the wall socket,

– only operated within the permissible temperature range,

– not covered or exposed to direct sunlight for longer periods of time in order to prevent

heat accumulation (see “Specifications” on page 22).

• Do not block any ventilation openings. Install the device and the mains unit in accordance

with the instructions given in this instruction manual.

• Do not install the device and the mains unit near any heat sources such as radiators, stoves,

or other devices (including amplifiers) that produce heat.

• Only use attachments/accessories specified by Sennheiser.

• When replacement parts are required, only use replacement parts specified by Sennheiser

or those having the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

• Do not overload wall outlets and extension cables as this may result in fire and electric

shock.

Important safety instructions

Danger due to high volumes

This is a professional transmitter. Commercial use is subject to the rules and regulations of

the trade association responsible. Sennheiser, as the manufacturer, is therefore obliged to

expressly point out possible health risks arising from use.

This transmitter is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the

sound pressure corresponding to the maximum permissible volume which is by law (in some

countries) allowed to affect your hearing for the duration of a working day. It is used as a

basis according to the specifications of industrial medicine. Higher volumes or longer

durations can damage your hearing. At higher volumes, the duration must be shortened in

order to prevent hearing damage. The following are sure signs that you have been subjected

to excessive noise for too long a time:

– You can hear ringing or whistling sounds in your ears.

– You have the impression (even for a short time only) that you can no longer hear high

notes.

Intended use

Intended use of the SR 300 IEM transmitter includes:

• having read this instruction manual especially the chapter “Important safety instructions”,

• using the device within the operating conditions and limitations described in this

instruction manual.

“Improper use” means using the device other than as described in these instructions, or

under operating conditions which differ from those described herein.

The evolution wireless series ew 300 IEM G3

This transmitter is part of the evolution wireless series generation 3 (ew G3). With this series,

Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of

operational reliability and ease of use. Transmitters and receivers are designed for

monitoring applications and permit wireless transmission with studio-quality sound.

The SR 300 IEM rack-mount transmitter

With the 2-channel/stereo monitoring system of the SR 300 IEM transmitter, musicians,

video and sound amateurs, reporters/broadcasters, etc. can directly monitor the received

sound signals without troublesome cables or monitor speakers being required. In addition,

the system can also be used for any application where talkback signals are to be transmitted.

Features of the SR 300 IEM G3 transmitter:

• Optimized PLL synthesizer and microprocessor technology

•HDX noise reduction system

• Pilot tone squelch control

• True diversity technology

• Switching bandwidth of 42 MHz

• Safe configuration of a multi-channel system using the WSM

The frequency bank system

The transmitter is available in 6 UHF frequency ranges with 1,680 transmission frequencies

per frequency range:

516 – 558 566 – 608 626 – 668 734 – 776 780 – 822 823 – 865

Delivery includes

Each frequency range (A–E, G) offers 26 frequency banks with up to 16 channels each:

Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixed

transmission frequency (frequency preset). The factory-preset frequencies within one

frequency bank are intermodulation-free. These frequencies cannot be changed.

For an overview of the frequency presets, please refer to the supplied frequency information

sheet. Updated versions of the frequency information sheet can be downloaded from the

corresponding product page on our website at www.sennheiser.com.

The frequency banks “U1” to “U6” allow you to freely select and store transmission

frequencies. It might be that these transmission frequencies are not intermodulation-free

(see page 20).

Delivery includes

The packaging contains the following items:

1 SR 300 IEM G3 rack-mount transmitter

1 NT 2-3 mains unit with one country adapter

1 rod antenna

1 GA 3 rack adapter

1 instruction manual

1 frequency information sheet

1 RF licensing information sheet

4 device feet

Kanalbank 1... 20

Kanalbank U1 ... U6

Kanal 16 – Frequenz-Preset

Kanal 1– Frequenz-Preset

Kanal 2– Frequenz-Preset

Kanal 16 – frei wählbare Frequenz

Kanal 1– frei wählbare Frequenz

Kanal 2– frei wählbare Frequenz

Product overview

Overview of the SR 300 IEM transmitter

BPUSH PUSH

L(I) R(II)

+22dBu

MAX

Loop Out

BAL

L(I) R(II)

BAL

AF IN

+22dBu MAX RF OUT

0682

FREQ Range-D 780-822 MHz

DESIGNED AND MADE IN GERMANY FMO

Stereo Transmitter SR 300 IEM

IDENT NO 627925

SER NO 2518100155

IC 2099A-G3SREK

ANT

516.000

ew300IEM

B.Ch: 1 1

Standard -18dB

MHz

Stereo Transmitter

PEAK

-10

-20

-30

-40

AF I

PEAK

-10

-20

-30

-40

AF II

  

Operating elements – front panel Operating elements – rear panel

Headphone output,

¼” (6.3 mm) jack socket ( )

Headphone volume control

button, backlit

Infra-red interface

Display panel, backlit in orange

Jog dial

STANDBY button with operation

indication (red backlighting),

serves as the ESC (cancel) key in

the operating menu

Cable grip for power supply DC cable

DC socket (DC IN) for connection of NT

2-3 mains unit

LED (yellow) for network activity

indication

LAN socket (ETHERNET RJ 45)

Audio output left

(LOOP OUT BAL L (I)),

¼” (6.3 mm) jack socket

Audio output right

(LOOP OUT BAL R (II)),

¼” (6.3 mm) jack socket

Type plate

Audio input left (BAL AF IN L (I)),

¼” (6.3 mm) jack/XLR-3 combo socket

Audio input right (BAL AF IN R (II)),

¼” (6.3 mm) jack/XLR-3 combo

socket

)

Antenna output (RF OUT)

with remote power supply input,

BNC socket

A B

Product overview

Overview of the displays

After switch-on, the transmitter displays the standard display.

Display Meaning

Audio level

“AF IN L(I)” and

“AF IN R(II)”

(Audio Frequency)

Frequency bank and

channel

Current frequency bank and channel number

Frequency Current transmission frequency

Name Freely selectable name of the transmitter

Transmission power Current transmission power

Equalizer setting Current equalizer setting

Input sensitivity Current input sensitivity for the audio signal available at

the audio input sockets BAL AF IN L (I) 

and BAL AF IN R (II) .

Lock mode icon

(see page 16)

Lock mode is activated

PEAK

-10

-20

-30

-40

PEAK

-10

-20

-30

-40

516.000

ew300IEM

B.Ch: 1 1

Standard -18dB

MHz



햴

 

PEAK

-10

-20

-30

-40

PEAK

-10

-20

-30

-40

AF I AF II

on o

(

)

(

)

channel with peak hold function

When the level displays for audio level show

full deflection, the audio input level is

excessively high. When the transmitter is

overmodulated frequently or for extended

periods of time, the “PEAK” display is shown

inverted.

Putting the transmitter into operation

Preparing the transmitter for use

Setting up the transmitter on a flat surface

Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave

stains on delicate surfaces.

Mounting the rack

mount “ears”

To fasten the rack mount “ears” :

왘Unscrew and remove the two recessed head screws (M4x8) on each side of the

transmitter (see left-hand diagram).

왘Secure the rack mount “ears” to the sides of the transmitter using the previously

removed recessed head screws (see right-hand diagram).

Fitting the device feet

왘Clean the base of the transmitter where you want to fix the device feet.

왘Fit the device feet to the four corners of the transmitter.

Connecting the

rod antenna

The supplied rod antenna  is suitable for use in good reception conditions.

왘Connect the rod antenna (see diagram on page 9).

When using more than one transmitter, we recommend connecting remote

antennas and, if necessary, using Sennheiser antenna accessories. Fore more

information, visit the ew G3 product page at www.sennheiser.com.

The rack mount “ears” are designed to help protect the operating elements from

damage or deformation, e.g. if the transmitter is dropped. Therefore, fasten the rack

mount “ears”, even if you do not want to rack mount your transmitter.

Do not fit the device feet when mounting the transmitter into a 19” rack.

Putting the transmitter into operation

Mounting the transmitter into a 19” rack

Rack mounting one

transmitter

왘Secure the rack mount “ears” (supplied with the GA 3 rack adapter) to the transmitter

as described on page 8.

왘Secure the blanking plate to one of the rack mount “ears” using two recessed head

screws (M 6x10) (see diagram).

Do not fit the device feet when mounting the transmitter into a 19” rack.





CAUTION! Risks when rack mounting the transmitter!

When installing the device in a closed or multi-rack assembly, please consider that, during

operation, the ambient temperature, the mechanical loading and the electrical potentials will

be different from those of devices which are not mounted into a rack.

왘Make sure that the ambient temperature within the rack does not exceed the permissible

temperature limit specified in the SR 300 IEM specifications.

왘Ensure sufficient ventilation; if necessary, provide additional ventilation.

왘Make sure that the mechanical loading of the rack is even.

왘When connecting to the power supply, observe the information indicated on the type

plate. Avoid circuit overloading. If necessary, provide overcurrent protection.

왘When rack mounting, please note that intrinsically harmless leakage currents of the

individual mains units may accumulate, thereby exceeding the allowable limit value. As

a remedy, ground the rack via an additional ground connection.

Putting the transmitter into operation

왘Connect the antenna. You have the following options:

– You can connect the supplied rod antenna to the rear of the transmitter (see

page 8). In this case, insert the two blanking plugs into the holes of the blanking

plate (see diagram on page 9).

– You can use the AM 2 antenna front mount kit (optional accessory) and mount the rod

antenna to the blanking plate .

– You can use a remote antenna, if necessary in conjunction with the AC 3 antenna

combiner.

왘Slide the transmitter with the mounted blanking plate into the 19” rack.

왘Secure the rack mount “ear” and the blanking plate to the 19” rack.

Rack mounting two

transmitters

To mount two transmitters into a rack using the GA 3 rack adapter:

왘Place the two transmitters side by side upside-down onto a flat surface:

왘Secure the jointing plate to the transmitters using six recessed head screws (M 3x6).

왘Secure the rack mount “ears” to the transmitters as described on page 8.

To mount the antennas:

왘Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.

For more information, visit the ew G3 product pages at www.sennheiser.com.

To mount the transmitters into the 19” rack:

왘Slide the transmitters into the 19” rack.

왘Secure the rack mount “ears” to the 19” rack.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Sennheiser

Sennheiser

Sennheiser SK 3063-U Manual de usuario

Sennheiser

Sennheiser Tourguide Wireless Transmitter SR 2020 D Manual de usuario

Sennheiser

Sennheiser SI 460 Manual de usuario

Sennheiser

Sennheiser EM 300 G3 - 01-09 Manual de usuario

Sennheiser

Sennheiser BTD 300 Manual de usuario

Sennheiser

Sennheiser TI 200 Manual de usuario

Sennheiser

Sennheiser BT T100 Manual de usuario

Sennheiser

Sennheiser EW 100 G3 Manual de usuario

Sennheiser

Sennheiser SK 3063 Dimensiones

Sennheiser

Sennheiser SK 300 G3 Manual de usuario

Sennheiser

Sennheiser SZI 1015-T Manual de usuario

Sennheiser

Sennheiser SKP 500 Manual de usuario

Sennheiser

Sennheiser SK 2012 Manual de usuario

Sennheiser

Sennheiser SK 1012-90 Manual de usuario

Sennheiser

Sennheiser SKM 3072 Dimensiones

Sennheiser

Sennheiser SR 2050 IEM Manual de usuario

Sennheiser

Sennheiser AC 3200-II High Gain Manual de usuario

Sennheiser

Sennheiser SI 1013 Manual de usuario

Sennheiser

Sennheiser XSW IEM Series Manual de usuario

Sennheiser

Sennheiser SK 5212-II - 2 Manual de usuario

Sennheiser

Sennheiser EM 300 G3 - 01-09 Manual de usuario

Sennheiser

Sennheiser SK 300 G3 Manual de usuario

Sennheiser

Sennheiser AC 2 Manual de usuario

Sennheiser

Sennheiser SR 3256 - Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario