Sennheiser Ew 300 IEM G3 Manual de usuario

SR 300 IEM

Instruction manual

Contents

Important safety instructions ............................................................................................................................... 2

The evolution wireless series ew 300 IEM G3 ...................................................................................................... 4

The SR 300 IEM G3 rack-mount transmitter ........................................................................................................ 4

The frequency bank system .................................................................................................................................... 4

Delivery includes ..................................................................................................................................................... 5

Product overview .................................................................................................................................................... 6

Overview of the SR 300 IEM G3 transmitter ........................................................................................................ 6

Overview of the displays .......................................................................................................................................... 7

Putting the transmitter into operation ............................................................................................................... 8

Preparing the transmitter for use .......................................................................................................................... 8

Connecting external devices ................................................................................................................................ 11

Connecting transmitters in a network ............................................................................................................... 12

Connecting the mains unit ................................................................................................................................... 12

Using the transmitter .......................................................................................................................................... 13

Switching the transmitter on/off ....................................................................................................................... 13

Monitoring the audio signal via headphones ................................................................................................... 14

Synchronizing transmitters and receivers via the infra-red interface ........................................................ 14

Adjusting the audio channels .............................................................................................................................. 17

Daisy chaining audio signals ................................................................................................................................ 17

Deactivating the lock mode temporarily ........................................................................................................... 18

Activating/deactivating the RF signal ............................................................................................................... 18

Using the operating menu .................................................................................................................................. 19

The buttons ............................................................................................................................................................. 19

Overview of the operating menu ........................................................................................................................ 20

Synchronizing the transmitter with a receiver ................................................................................................ 21

Cleaning the transmitter ..................................................................................................................................... 23

If a problem occurs ... ........................................................................................................................................... 23

Specifications ........................................................................................................................................................ 25

Manufacturer Declarations ................................................................................................................................. 27

For more detailed information on the individual sections of this instruction manual, visit the corre-

sponding product page on our website at www.sennheiser.com.

Important safety instructions

• Read this instruction manual.

• Keep this instruction manual. Always include this instruction manual when passing the

product and the mains unit on to third parties.

• Heed all warnings and follow all instructions in this instruction manual.

• Only clean the product and the mains unit when they are not connected to the mains. Use a

cloth for cleaning.

• Never open the product, otherwise you can receive an electric shock. If products are opened

by customers in breach of this instruction, the warranty becomes null and void.

• Refer all servicing to qualified service personnel.

Servicing is required if the product or the mains unit have been damaged in any way, liquid

has been spilled, objects have fallen inside, the product or the mains unit have been

exposed to rain or moisture, do not operate properly or have been dropped.

• WARNING: To reduce the risk of fire or electric shock, do not use the product and the mains

unit near water and do not expose them to rain or moisture. Do not place objects filled with

liquids, such as vases or coffee cups, on the product.

• Only use the supplied mains unit.

• Unplug the mains unit from the wall socket

– to completely disconnect the device from the mains,

– during lightning storms or

– when unused for long periods of time.

• Only operate the mains unit from the type of power source specified in the chapter

“Specifications” (see page 25).

• Ensure that the mains unit is

– in a safe operating condition and easily accessible,

– properly plugged into the wall socket,

– only operated within the permissible temperature range,

– not covered or exposed to direct sunlight for longer periods of time in order to prevent

heat accumulation (see “Specifications” on page 25).

• Do not block any ventilation openings. Install the product and the mains unit in accordance

with the instructions given in this instruction manual.

• Do not install the product and the mains unit near any heat sources such as radiators,

stoves, or other devices (including amplifiers) that produce heat.

• Only use attachments/accessories specified by Sennheiser.

• When replacement parts are required, only use replacement parts specified by Sennheiser

or those having the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

• Do not overload wall outlets and extension cables as this may result in fire and electric

shock.

Important safety instructions

Danger due to high volumes

This product is also intended for professional use. Commercial use is subject to the safety-at-

work regulations. Sennheiser, as the manufacturer, is therefore obliged to expressly point out

possible health risks arising from use.

This product is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the

sound pressure corresponding to the maximum permissible volume which is by law (in some

countries) allowed to affect your hearing for the duration of a working day. It is used as a

basis according to the specifications of industrial medicine. Higher volumes or longer dura-

tions can damage your hearing. At higher volumes, the duration must be shortened in order

to prevent hearing damage. The following are sure signs that you have been subjected to

excessive noise for too long a time:

• You can hear ringing or whistling sounds in your ears.

• You have the impression (even for a short time only) that you can no longer hear high

notes.

Intended use

Intended use of the SR 300 IEM G3 transmitter includes:

• having read this instruction manual especially the chapter “Important safety instructions”,

• using the product within the operating conditions and limitations described in this instruc-

tion manual.

“Improper use” means using the product other than as described in these instructions, or

under operating conditions which differ from those described herein.

The evolution wireless series ew 300 IEM G3

This transmitter is part of the evolution wireless series generation 3 (ew G3). With this series,

Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of

operational reliability and ease of use. Transmitters and receivers are designed for moni-

toring applications and permit wireless transmission with studio-quality sound.

The SR 300 IEM G3 rack-mount transmitter

With the SR 300 IEM G3 2-channel/stereo monitoring transmitter, musicians, video and

sound amateurs, reporters/broadcasters, etc. can directly monitor the received sound signals

without troublesome cables or monitor speakers being required. In addition, it can also be

used for any application where talkback signals are to be transmitted.

Features of the SR 300 IEM G3 transmitter:

• Optimized PLL synthesizer and microprocessor technology

•Stereo/monoselection

•HDX noise reduction system

• Switching bandwidth of 42 MHz

• Safe configuration of a multi-channel system using the WSM

• Easy setup of a multi-channel system using the Easy Setup Sync function

The frequency bank system

The transmitter is available in 6 UHF frequency ranges with 1,680 transmission frequencies

per frequency range:

Range A:Range G:Range B: Range C:Range D:Range E:

516 – 558 566 – 608 626 – 668 734 – 776 780 – 822 823 – 865

Delivery includes

Each frequency range (A–E, G) offers 26 frequency banks with up to 16 channels each:

Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixed

transmission frequency (frequency preset). The factory-preset frequencies within one

frequency bank are intermodulation-free. These frequencies cannot be changed.

For an overview of the frequency presets, please refer to the supplied frequency information

sheet. Updated versions of the frequency information sheet can be downloaded from the

corresponding product page on our website at www.sennheiser.com.

The frequency banks “U1” to “U6” allow you to freely select and store transmission frequen-

cies. It might be that these transmission frequencies are not intermodulation-free (see

page 22).

Delivery includes

The packaging contains the following items:

1 SR 300 IEM G3 rack-mount transmitter

1 NT 2-3 mains unit with one country adapter

1 rod antenna

1 GA 3 rack adapter

1 instruction manual

1 frequency information sheet

1 RF licensing information sheet

4 device feet

Frequency bank 1... 20

Frequency bank U1 ... U6

Channel 16 – frequency preset

Channel 1– frequency preset

Channel 2– frequency preset

Channel 16 – freely selectable frequency

Channel 1– freely selectable frequency

Channel 2– freely selectable frequency

Product overview

Overview of the SR 300 IEM G3 transmitter

PUSH PUSH

L(I) R(II)

+22dBu

MAX

Loop Out

BAL

L(I) R(II)

BAL

AF IN

+22dBu MAX RF OUT

0682

FREQ Range-D 780-822 MHz

DESIGNED AND MADE IN GERMANY FMO

Stereo Transmitter SR 300 IEM

IDENT NO 627925

SER NO 2518100155

IC 2099A-G3SREK

ANT

516.000

ew300IEM

B.Ch: 1 1

Standard -18dB

MHz

Stereo Transmitter

PEAK

-10

-20

-30

-40

AF I

PEAK

-10

-20

-30

-40

AF II

  

Operating elements – front panel Operating elements – rear panel

Headphone output,

¼” (6.3 mm) jack socket ( )

Headphone volume control

button, backlit

Infra-red interface

Display panel, backlit in orange

Jog dial

STANDBY button with operation

indication (red backlighting),

serves as the ESC (cancel) key in

the operating menu

Cable grip for power supply DC

cable

DC socket (DC IN) for connection of

NT 2-3 mains unit

LED (yellow) for network activity

indication

LAN socket (ETHERNET RJ 45)

Audio output left

(LOOP OUT BAL L(I)),

¼” (6.3 mm) jack socket

Audio output right

(LOOP OUT BAL R(II)),

¼” (6.3 mm) jack socket

Type plate

Audio input left (BAL AF IN L(I)),

¼” (6.3 mm) jack/XLR-3 combo

socket

Audio input right (BAL AF IN R(II)),

¼” (6.3 mm) jack/XLR-3 combo

socket

)

Antenna output (RF OUT)

with remote power supply input,

BNC socket

Product overview

Overview of the displays

After switch-on, the transmitter displays the standard display.

Display Meaning

Audio level

“AF IN L(I)” and

“AF IN R(II)”

(AF = Audio Frequency)

Frequency bank and

channel

Current frequency bank and channel number

Frequency Current transmission frequency

Name Freely selectable name of the transmitter

Transmission icon RF signal is being transmitted

Transmission power Current transmission power

Equalizer setting Current equalizer setting

Input sensitivity Current input sensitivity for the audio signal available

at the audio input sockets BAL AF IN L (I)  and

BAL AF IN R (II) 

Lock mode icon

(see page 18)

Lock mode is activated

PEAK

-10

-20

-30

-40

PEAK

-10

-20

-30

-40

516.000

ew300IEM

B.Ch: 1 1

Standard -18dB

MHz

햴



 

PEAK

-10

-20

-30

-40

PEAK

-10

-20

-30

-40

AF I AF II

Modulation of the left (I) and right (II) audio

channel with peak hold function

When the level displays for audio level show

full deflection, the audio input level is exces-

sively high. When the transmitter is overmod-

ulated frequently or for extended periods of

time, the “PEAK” display is shown inverted.

Putting the transmitter into operation

Preparing the transmitter for use

Setting up the transmitter on a flat surface

Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave

stains on delicate surfaces.

Mounting the rack

mount “ears”

To fasten the rack mount “ears” :

왘Unscrew and remove the two recessed head screws (M4x8) on each side of the trans-

mitter (see left-hand diagram).

왘Secure the rack mount “ears” to the sides of the transmitter using the previously

removed recessed head screws (see right-hand diagram).

Fitting the device feet

왘Clean the base of the transmitter where you want to fix the device feet.

왘Fit the device feet to the four corners of the transmitter.

When using more than one transmitter, we recommend connecting remote

antennas and, if necessary, using Sennheiser antenna accessories. Fore more infor-

mation, visit the ew G3 product page at www.sennheiser.com.

The rack mount “ears” are designed to help protect the operating elements from

damage or deformation, e.g. if the transmitter is dropped. Therefore, fasten the rack

mount “ears”, even if you do not want to rack mount your transmitter.

Do not fit the device feet when mounting the transmitter into a 19” rack.

Otros manuales para ew 300 IEM G3

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Sennheiser

Sennheiser

Sennheiser SK 1013-6 Manual de usuario

Sennheiser

Sennheiser SK 300 Manual de usuario

Sennheiser

Sennheiser SK 5012 Dimensiones

Sennheiser

Sennheiser AC 3200-II High Gain Manual de usuario

Sennheiser

Sennheiser SI 1010 Manual de usuario

Sennheiser

Sennheiser SK 1012-90 Manual de usuario

Sennheiser

Sennheiser EM 300 G3 - 01-09 Manual de usuario

Sennheiser

Sennheiser sk100-g3 bodypak transmitter Manual de usuario

Sennheiser

Sennheiser SK 500 G3 Manual de usuario

Sennheiser

Sennheiser SR 2000 IEM Manual de usuario

Sennheiser

Sennheiser BF1083-UHF Manual de usuario

Sennheiser

Sennheiser BT T100 Manual de usuario

Sennheiser

Sennheiser SK 2012 - ANNEXE 629 Manual de usuario

Sennheiser

Sennheiser TVC2-TX Manual de usuario

Sennheiser

Sennheiser SK 5212 Manual de usuario

Sennheiser

Sennheiser SK 5012 Manual de usuario

Sennheiser

Sennheiser SKP 300 G3 Manual de usuario

Sennheiser

Sennheiser BF 1053 Manual de usuario

Sennheiser

Sennheiser SZI 1015-T Manual de usuario

Sennheiser

Sennheiser SKM 2020-D Dimensiones

Sennheiser

Sennheiser SK 2000 Manual de usuario

Sennheiser

Sennheiser Tourguide Wireless Transmitter SR 2020 D Manual de usuario

Sennheiser

Sennheiser SKP 30 Manual de usuario

Sennheiser

Sennheiser SK 5212-II - FREQUENCY TABLES Dimensiones

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario

Sennheiser ew 300 IEM G3 Manual de usuario

Manuales populares de Transmisor de otras marcas