Seneca VPN BOX 2 Manual de usuario

MI00600-0-EN INSTALLATION MANUAL 1/2

VPN BOX 2

DOCUMENTATION

INSTALLATION MANUAL

SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287

WARNING: The full content of this manual must be read before any operation. The module must only be used by

qualied electricians. Specic documentation is available via QR-CODE shown on page 1.

Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).

The symbol on the product or its packaging shows the product must be surrendered to a collection centre

authorized to recycle electrical and electronic waste.

The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to

electrostatic discharges. Take appropriate measures during any operation.

PRELIMINARY WARNINGS

The word WARNING preceded by the symbol indicates conditions or actions that put the user's safety at risk.

The word ATTENTION preceded by the symbol indicates conditions or actions that might damage the

instrument or the connected equipment.

The warranty shall become null and void in the event of improper use or tampering with the module or devices

supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this

manual are not followed.

CONTACT INFORMATION

Technical support [email protected] Product information [email protected]

This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.

The content of this document corresponds to the described products and technologies.

Stated data may be modied or supplemented for technical and/or sales purposes.

MI00600-0-EN INSTALLATION MANUAL 2/2

TECHNICAL SPECIFICATIONS

CERTIFICATIONS

https://www.seneca.it/products/vpn-box2/doc/CE_declaration

POWER SUPPLY 9 ÷ 36Vdc; 30 ÷ 40W max.

ENVIRONMENTAL

CONDITIONS

Storage temperature: -20°C ÷ 70°C

Operating temperature: 0°C ÷ 50°C

IP ADDRESS

OF FACTORY

The default IP address is congured in DHCP

PROCESSOR Intel® Pentium™ N4200 1.1GHz ProcessorClock:

CORE NUMBER Core: 4

COOLING Fanless

MEMORY

DR3L da 8GB;

HARD DISK SSD da 64GB

CASE Compact Fanless

I/O INTERFACE 1x VGA, 1x HDMI, 2x RJ45 GbE LAN, 2x USB 3.0, 2x USB 2.0,

ON/OFF button, 1x PWR LED, 1x HD ACT. LED

MODULE LAYOUT

ELECTRICAL CONNECTIONS

Net weight: 1kg

Programming tools, app, manuals, templates, examples, etc. for the product can be downloaded free of charged at

www.seneca.it in the product section.

By means of the removable two-pole terminal, located on the back of the device, it is

possible to install an external push-button for switching the device on and off, which can be

controlled remotely.

REMOTE BUTTON

52,7

163

FRONT

VPN BOX 2

USB 3.0

USB 2.0USB 2.0 ON

OFF

REMOTE

BUTTON

LAN

RETRO

POWER

SUPPLY

114

LEFT SIDE

Tabla de contenidos

Otros manuales de Unidad de control de Seneca

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario