Self-Sat Snipe Manual de usuario

ENGLISH : User’s manual

GERMAN: Bedienungsanleitung

FRENCH : Manual utilisateur

DUTCH : Gebruikershandleiding

ver 1.0

www.selfsat.com

#637, Smart-Hub ndustry-University Convergence Center, 237 Sangidaehak-ro, Siheung-si,

Gyeonggi-do, KOREA

Tel : +82 (0)31 8041 1500 Fax : +82 (0)31 8041 1550 E-mail : [email protected]

I DO IT Co., Ltd.

AUTO SKEW

Automatic CAMPING Flat Satellite Antenna

SAT>IP LNB integrated antenna

TECHNOLOGY

Contents

1. General Information

.............................................................................................

...............................................................................

.............................................................................................

1-1. Introduction

1-2. Proper use and operation

1-3. Safety notes

2. Contents

.......................................................................................

...........................................................................................

2-1. Accessory included

2-2. Name of parts

..............................................................................................

...........................................................................................

8-1. Dimension

8-2. Specications

9. Caravan/Motorhome Installation

..............................................................................

9-1 . Required space for SNIPE Air

9-2. Equipment for installation

9-3. Instruction for installation

3. Operating Instruction

....................................................................................

..................................................................................

.........................................................................................

3-1. Connection diagram

3-2. Functional description

3-3. Quick reference

...................................................................

...................................................................................

6-1. How to set Wi-Fi network on devices

6-2. Conguration of the router via web

6-3. SAT>IP client setting

4. Software Upgrade

5. Advanced Settings

6. Preparation of broadcasting on SAT>IP clients

................................................................................

...............................................................................

7. Trouble Shooting

8. Specications

................................................................................ 15

ENGLISH - 2

1. General Information

1-1. Introduction

These instructions describe the functions and operation of SNIPE Air, auto skew satellite system.

Correct and safe operation of the system can only be ensured by following instruction, both for

installation and operation.

SNIPE Air is an intelligent satellite-TV reception system which can align itself towards a preset

satellite automatically as long as the system is located within the footprint of the selected

satellite.

SNIPE Air only occupies requisite space while it performs the necessary adjustments with slim and

agile antenna body.

For general operation, please ensure that the system always has a clear view to the sky. In Europe,

all satellites are in an approximate position in the south. If the satellite‘s signal beam is

interrupted by obstacles such as mountains, buildings or trees, the unit will not function and no

TV signal will be received. For more information on general use of this unit consult local dealer for

assistance.

Also, it is equipped with SAT>IP LNB and 802.11AC router, which enables user to use up to 8

dierent mobile devices simultaneously to watch satellite broadcasting channels.

This SNIPE Air is designed with most state-of-the-art technology, taking part of the worldwide

trend set.

For more information on general use of this unit consult local dealer for assistance.

ENGLISH - 3

It is not possible to add or remove components on this product.

The use of other components other than those originally supplied is not permitted.

To complete installation, installer must strictly follow instruction in the supplied user manual.

Failure to follow the user manual may cause damage to the unit or user's vehicle.

The product does not require any regular maintenance; all service must be carried out at

approved service centers.

All relevant guidelines of the automotive industry must be observed and complied with.

The equipment must only be installed on solid vehicle roofs.

Avoid cleaning user's vehicle with the mounted satellite system in a drive-through car wash or

a car wash with a high-pressure cleaner.

•

Please also note the following instructions from the manufacturer :

1-2. Proper use and operation

This product has been designed for portable use and xed installation on vehicles with

maximum speeds of 130 km/h. The unit is programmed to automatically aims at geostationary

television satellites.

The power is supplied by a standard vehicle electrical system with a rated voltage of 12 or 24

Volts DC. For installations on the vehicle, use power input cable (cigarette lighter cable) to

supply power. For portable use, optional power adaptor produced by SNIPE Air manufacturer

must be used.

Use of the equipment for any other purpose to the one specied is not permitted.

1-3. Safety notes

Please carefully read and follow the operating instructions in this manual and use the

SNIPE Air for its intended purpose.

Upon installation of SNIPE Air, please ensure the installation is done with supplied cables

and ensure the cables are not modied in any way.

As the user of this equipment, be responsible for ensuring compliance with the relevant

laws and regulations.

The manufacturer does not take liability for direct or indirect consequential damage of

the system, motor vehicles or other equipment by reason of unsuitable battery usage or

erroneous installation or wrong wire connection.

ENGLISH - 4

2. Contents

2-1. Accessory included

Power adaptor has to be purchased separate. Please ask to local dealer/shop for

more information.

Only power adaptor produced by SNIPE series manufacturer is guaranteed and

has be used.

Actual components may dier from the above images.

The unit enables to have power from car battery. To make power input cable for

direct connection, cut o cigarette lighter adaptor and peel o to take copper

cables out.

※

Main unit Mounting plate

Cable glandCarrying case Cable holder

Cigarette lighter adaptor

Receiver cable -12m , Grey

M6 ×15(8) ,

M4 ×16(2) , M4 ×20(10)

User manual

Allen wrench Power adaptor

(Optional)

Manual

Controller / Wi-Fi antenna(4) Controller bracket Controller cable - 12m , Black

SAT>IP LAN cable

Base pads

ENGLISH - 5

2-2. Name of parts

Main unit

Latch

Antenna

LNB & SAT>IP server

Skew pivot

to Receiver

SAT>IP port

to Controller

Elevation

Main body

Base

Mounting plate

Controller

Bracket

Power port

Ex LAN port

USB port

SAT>IP port

to Main unit

POWER , Arrows , OK button

LCD screen

HOME LED

Communication LED

NID check LED

Error message LED

LAN LED

SAT>IP LED

CPU LED

ROUTER PW LED

GPS LED

HOME , MODE , ROUTER , TUNE button

ENGLISH - 6

In order to watch the broadcast in Smart devices must be dedicated programs

or application.

Please visit http://Satip.info for more information.

NOTE

3. Operating Instruction

3-1. Connection diagram

Portable use

Attach four(4) base pads to the bottom of antenna base.

Cigarette lighter adaptor or Power input cable

Receiver cable

(Grey color)

Controller cable (Black color)

SAT>IP LAN cable

MAIN UNIT

RECEIVER

CONTROLLER

Use black controller cable to connect the antenna to the controller.

Controller cable looks similar to the receiver cable but has dierent color and

labeling. Please check the labels to use the correct cable for the job.

Please ensure the cables that are supplied are used and not modied in anyway.

ENGLISH - 7

POWER , Arrows , OK button

LCD screen

LAN LED

SAT>IP LED

CPU LED

ROUTER PW LED

3-2. Functional description

Please mind that the Wi-Fi antenna should not be placed behind or underneath of metal material to ensure its

performance.

NOTE

Get ready four (4) of Wi-Fi antennas to assemble to the controller.

Check the printed Wi-Fi range, 5G or 2.4G, at the bottom of antenna and on the top side of the

controller to match.

Put and spin of each antenna to assemble the controller.

Hold the bottom of each antenna and spin tight till the end for ﬁrm assembly.

Assemble controller Wi-Fi antenna

HOME LED

Communication LED

NID check LED

Error message LED

GPS LED

Hold the very bottom of antenna and spin tight

HOME , MODE , ROUTER , TUNE button

ENGLISH - 8

HOME position is when the antenna completely folded down and facing forward.

NOTE

When the all cable connections are completed, press POWER to turn the unit on.

HOME LED will be solid this means the antenna is ready to go.

If the antenna did not go back to HOME position, HOME LED will continue to ﬂash while antenna

comes back to HOME. When the unit is ready, the default satellite “ASTRA1” or the last selected

satellite will be shown on LCD screen of the controller.

Communication LED will be solid when the unit is turned on.

(This light means antenna unit is communicating with controller correctly.)

ROUTER PW LED will be solid on since the unit is turned on.

(This light means embedded router is ON)

CPU LED will ﬂash since the unit is turned on.

(This light means embedded router is working properly.)

SAT>IP LED will ﬂash temporarily to check operational channel when SAT>IP server is turned on.

(This light will ﬂash again when SAT>IP server is in actual operation streaming data out to smart

devices.)

GPS LED ﬂashes while searching for the current location. When GPS position is conﬁrmed the LED

will become solid.

Waiting until both HOME & GPS LED’s are solid is recommended as this will allow the unit to ﬁnd the

selected satellite faster with more precise alignment accuracy.

If the searching operation starts before GPS becomes solid GPS LED will continue to ﬂash even when

the satellite is already locked. In this case, the unit may readjust skew once its current location is

conﬁrmed.

1. Get ready to use

2. Selecting the satellite

Select the satellite which user wants to view using arrow buttons on the controller and press OK.

Network Identiﬁcation (NID) check LED will ﬂash and the antenna status will display “SEARCHING” and

then “CHECKING” on LCD screen.

NID check LED will be solid once the satellite is found and then “SAT FOUND” will appear on LCD.

If wrong satellite is selected, move to the correct satellite name using arrows and press OK to conﬁrm

new satellite.

ENGLISH - 9

3. Back to HOME position & Turning o

After use and before travelling, press HOME to return the unit back to HOME position.

To fully turn oﬀ the unit, press and hold POWER for 5 seconds when the unit is at HOME position.

If user stays in a location for an extended period or wish to save power user can leave the unit up by

simply turning oﬀ the unit by ROUTER button on the left side of controller. ROUTER PW LED will be oﬀ

but signal stills comes through.

FINE TUNE mode can be initialized when a selected satellite is found and user wants to increase the signal

strength further.

4. Special function 1 : FINE TUNE mode

Press TUNE to start FINE TUNE mode.

First TUNE is for AZ (Azimuth). Adjust antenna position using arrow buttons to ﬁnd a new position

providing better signal quality and press OK to set. The signal level will be displayed on the controller

(Q ___ ) or satellite receiver.

Repeat the same process of adjust the EL (Elevation) and SK (LNB skew).

To save new position of the satellite and exit, press TUNE button. Saved new position will be placed

in the memory for the next turn on. But once vehicle moves or conﬁrms new GPS location, the saved

position will be reset.

Error message LED will be illuminated and the error message detail will be shown on LCD display, this will

detail if there is a problem with main unit.

5. Special function 2 : ERROR MESSAGE

HOME POSITION error

If antenna does not come back to HOME position within the allowed time or the system does not

recognise HOME position despite the antenna being back at HOME position (The Limit sensor is

faulty).

ii. TUNNER error

If there is no response when searching the satellite due to a faulty tuner or its settings.

iii. MOVEMENT error

If the PRO MAX cannot move to correct position for some reason.

iv. COMMUNICATION error

If connection is lost between the unit and controller that lasts longer than 5 seconds.

Otros manuales para Snipe

Tabla de contenidos

Idiomas:

Otros manuales de Antena de Self-Sat

Self-Sat

Self-Sat Snipe Manual de usuario

Self-Sat

Self-Sat SNIPE 3 Manual de usuario

Self-Sat

Self-Sat Snipe Dome Manual de usuario

Self-Sat

Self-Sat H35D SERIES Manual de usuario

Self-Sat

Self-Sat H30D4 Manual de usuario

Self-Sat

Self-Sat WAVE Manual de usuario

Self-Sat

Self-Sat IP series Manual de usuario

Self-Sat

Self-Sat H10D Manual de usuario

Self-Sat

Self-Sat SNIPE DOME 2 Manual de usuario

Self-Sat

Self-Sat SNIPE PLATINUM Manual de usuario

Self-Sat

Self-Sat H22dCSS+ Series Manual de usuario

Self-Sat

Self-Sat HH90 Manual de usuario

Self-Sat

Self-Sat H10D Manual de usuario

Self-Sat

Self-Sat Snipe Manual de usuario

Self-Sat

Self-Sat H22D Series Manual de usuario

Self-Sat

Self-Sat CAMP38 Manual de usuario

Self-Sat

Self-Sat HH90 Manual de usuario

Self-Sat

Self-Sat CARAVAN PLUS TWIN Manual de usuario

Self-Sat

Self-Sat H10D Manual de usuario

Self-Sat

Self-Sat H50D Series Manual de usuario

Self-Sat

Self-Sat CARAVAN MOBIL Manual de usuario

Self-Sat

Self-Sat SNIPE PRO Manual de usuario

Self-Sat

Self-Sat SNIPE MOBIL CAMP DIRECT Manual de usuario

Self-Sat

Self-Sat H21D Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario