time on every day of the week.
Only one day of the week
If you enter a particular day while setting a switching command (using button “Day”), the command will
be carried out at the set time only on that specific day of the week.
Abbreviations
MO = Monday,
TU = Tuesday,
WE = Wednesday,
TH = Thursday,
FR = Friday,
SA = Saturday,
SU = Sunday
On a weekly combination (or “block” programming) of days
When pressing button “Day” several times, you will find by means of the display that three combinations
of days are also possible:
MO TU WE TH FR = Monday to Friday
SA SU = Saturday and Sunday
MO TU WE TH FR SA = Monday to Saturday
If you enter these combinations of days instead of one individual day, the on/off command will be carried
out at the set time on each of the corresponding days of the week. This programme will repeat itself
week after week until the programme is changed or the timer is disconnected.
G. How to check, change or delete switching commands
Checking
By pressing button “Timer” a number of times you can make the switching-on and switching-off
commands visible in the display: first the set commands are presented and then the free spaces.
Changing
You can change a switching command by making it appear on the display and pressing “day”, “hour”
and “minute” buttons accordingly.
Deleting
Delete a timer command period (an “on” and “off” time) by making that “on” display visible in the window
and pressing “h+” until “—“ is displayed immediately after 23. Do the same with “m+” until “—“appears
after 59. Press “Day” until no days are visible. Repeat this sequence for the “off” mode. The deleted
command then becomes available for reprogramming. Press button “Timer” after changing or deleting a
command to save the new command.
Switching back to present time
After setting the switching commands you return to normal time reading by pressing button.
Is power being supplied to connecting load?
The word “ON” or “OFF” in the display, next to the normal time reading, informs you about the actual
switching condition.
H. Override switch
When in the ‘off” mode pressing the button marked will switch “on” the power to the load connected
to the timer. If the button is not pressed again, power will remain on until the following “off”command
the “on” mode, pressing thisWhen in button will turn the power off. If not pressed
has been reached,
again the power will remain off until the following “on” command has been reached.
