Sekonic FLASHMATE L-308X Guía del usuario

L-308X

L-308X-U

Startup Guide

Thank you for purchasing FLASHMATE L-308X Series.

This Startup Guide introduces the basic operations of this light meter.

For details about how to use this light meter, please see the Operating Manual.

1. Download

2. Check Included Items

The following items are included with the meter in the package.

Please be sure to check that all noted items are included.

※If any items are missing, please contact the distributor or the reseller

you purchased the meter from.

※Batteries are not included in the package. Please obtain these

separately.

Meter Startup Guide

(this document)

Soft Case Strap Synchro

Terminal Cap

（Installed on

the meter）

Safety

Precaution

L-308X

Safety Precaution

For Proper Operation

Beforeusing this product, please read this "Safety Precautions" for

properoperation.

WARNING

TheWARNING symbol indicates the

possibilityof death or serious injury if the

productis not used properly.

CAUTION

TheCAUTION symbol indicates the

possibilityof minor to moderate personal

injuryor product damage if the product is

notused properly.

NOTICE TheNOTICE symbol indicates cautions

orrestrictions when using the product.

Pleaseread all notes to avoid errors in

operation.

General Safety Information

• Read the Operating Manual before use.

• Keep the Operating Manual on hand for reference at any

time.

• Stop using this product when there are any abnormalities.

• The modication or disassembly of this product is prohibited.

• Do not attempt to repair this product by yourself.

• This product is intended only for persons with expert

knowledge.

• Monitor children so that they do not touch this product.

• Use this product in a usage environment described in the

OperatingManual.

• This product is not waterproof.

WARNING

Thereis a danger of electrical shock when using high

voltagestrobes.

Avoidcontacting the terminals.

Thisproduct emits electromagnetic waves.

Donot bring this product close to persons with

pacemakers.

Donot use this product in an explosive atmosphere.

Useof devices emitting electromagnetic waves is

prohibitedin hospitals.

CAUTION

• Check the material of the neck strap to see if there is any

riskof allergy.

• Be careful of sudden emission of lights from strobes.

NOTICE

• Do not leave this product on car dashboards in hot weather.

Thismay damage the product.

• Remove the batteries when this product is not in use for a

longperiod of time.

• When the desired performance is not achieved, stop using

thisproduct and contact the service center.

Information for Users on Collection and

Disposal of Old Equipment

Toprotect environment, do not through this device

andbatteries away with the normal household waste

atthe end of those life, but bring them in at an

ofcial collection point of your country for recycling.

English

Light Meter

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

3. Names of Parts

①POWER

Button

②

Lumisphere（Light Receptor）

③MODE Button

④ MEASURING Button

⑤ UP Button

⑥DOWN Button

⑦ISO Button

⑧Synchro Terminal

4. Explanation of the Liquid Crystal Display (LCD)

5. Basic Operation

Switch the Light Receiving Method

To set for either incident or reected light operation, slide the Lumisphere

②mounting until it clicks.

Incident Light Measurement

Slide Lumisphere ②to the left over the meter cell (lens) and take a

measurement. When using the Lumidisc (optional), slide Lumisphere ②

to the right to expose meter cell to attach the Lumidisc, and take a

measurement.

Reected Light Measurement

Slide Lumisphere ②to the right to expose meter cell, and take a

measurement. Measurements are made from the camera position or within

the same view as the camera lens.

Illuminance/Lighting Ratio Measurement

Attach the Lumidisc (optional) over the meter cell (lens). Point the Lumidisc

directly toward the light source and measure.

①②

③

④

⑤

⑥

⑦

⑧

Shutter speed

frames rate

shutter angle

Illuminance

Battery Power Indicator Measuring Mode icons ISO Display

Aperture

0.1 step display

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Setting ISO sensitivity

Hold down the ISO Button ⑦and press either the UP Button ⑤or DOWN

Button ⑥to select ISO sensitivity being used.

6. Display Mode

Select PHOTO Mode, HD CINE Mode or CINE Mode.

Please see "8.Custom setting function" below for how to select.

7. Select Measuring Mode

Press the MODE Button ③to select the Measuring mode.

HD_CINE Mode

Cord Flash mode (shutter speed priority)

PHOTO Mode

EV mode (Ambient mode)Aperture Priority Mode

Shutter speed priority mode

Auto Reset Cordless Flash mode (shutter speed priority)

Simplified illuminance mode(Selectable in Custom setting)

Frame rate setting mode

Shutter angle setting mode

CINE Mode

Shutter speed priority mode

Frame rate priority mode

Simplified illuminance mode (Selectable in Custom setting)

Hold ISO Button ⑥and press MODE Button ③to return to the previous

Measuring Mode.

8. Custom Setting Function

1) To enter the Custom Setting Mode, hold the MODE Button ③and then

press the POWER Button ①to turn the meter ON.

‘CS’ (custom setting) and setting number (1

to 3) will appear at the right of the display.

The current custom setting will appear at

the left side of the display.

2) Press the UP Button ⑤or DOWN

Button ⑥to select the desired custom

setting group number.

Custom Setting item

CS No./Group

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

3) The Custom setting item will change each time the MODE Button ③is

pressed.

Use these settings to customize meter operations and displays to fit

your camera and metering requirements.

Custom setting group Custom setting item

Display mode

Increments of aperture

and shutter speed

Simplified illuminance

display

1/2 Step

No Display

Lux

CINE modeHD_CINE mode

Full Step 1/3 Step

(※1)

PHOTO mode

(※1)

ＣＳ１

ＣＳ２

ＣＳ３

(※2)

CS number

Foot-Candle

(※1)

※1

Default settings.

※2

Simplified illuminance (Lux or Foot-Candle) is not displayed in PHOTO mode.



4) Press POWER Button ①to exit Custom setting mode.

9. Calibration Compensation Function

Compensation may be necessary to calibrate the meter to camera

specications or to match the display to another exposure meter.

Calibration compensation can be made in precise 1/10 step

increments in a +/-1.0 EV range.

1) Set the camera Display mode (HD CINE, CINE or PHOTO) in advance.

2) To enter the calibration compensation mode, hold the ISO Button ⑦and

press the POWER Button ①to turn the meter ON.

3) Select the compensation amount by pressing the UP Button ⑤ or

DOWN Button ⑥.

※Plus compensation results

in the increased exposure

(the image becomes

brighter), and minus

compensation results in the

decreased exposure (the

image becomes darker).

4) Press POWER Button ①to exit

Calibration compensation mode.

Calibration

compensation mode

Selected

Display mode

Compensation

amount

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Otros manuales para FLASHMATE L-308X

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Sekonic

Sekonic

Sekonic HANDY LUMI Manual de usuario

Sekonic

Sekonic SPECTROMASTER C-800 Manual de usuario

Sekonic

Sekonic TWINMATE L-208 Manual de usuario

Sekonic

Sekonic LITEMASTER PRO L-478DR-A-EL Manual de usuario

Sekonic

Sekonic SPECTROMASTER C-7000 Guía del usuario

Sekonic

Sekonic SPEEDMASTER L-858D Manual de usuario

Sekonic

Sekonic DUAL MASTER L-558 Manual de usuario

Sekonic

Sekonic FLASH MASTER L-358 Manual de usuario

Sekonic

Sekonic AUTO LEADER L-188 Manual de usuario

Sekonic

Sekonic LITEMASTER PRO L-478DR-A-EL Guía del usuario

Sekonic

Sekonic FLASHMATE L-308BII Manual de usuario

Sekonic

Sekonic LITEMASTER PRO L-478 Series Guía del usuario

Sekonic

Sekonic C-7000 SDK Manual de usuario

Sekonic

Sekonic SPEEDMASTER L-858D Manual de usuario

Sekonic

Sekonic C-700 Manual de usuario

Sekonic

Sekonic Litemaster Pro L-478DR Manual de usuario

Sekonic

Sekonic LITEMASTER PRO L-478DR-U-PX Manual de usuario

Sekonic

Sekonic STUDIO DELUXE? L-398A Guía del usuario

Sekonic

Sekonic L-608 CINE Manual de usuario

Sekonic

Sekonic Auto-Leader L-38 Manual de usuario

Sekonic

Sekonic STUDIO DELUXE? L-398A Manual de usuario

Sekonic

Sekonic LITEMASTER PRO L-478 Series Manual de usuario

Sekonic

Sekonic L-478D Series Guía del usuario

Sekonic

Sekonic SPEEDMASTER L-858D Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario