Sega Grid 42 Manual de usuario

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

OWNER'S MANUALGRID RACE DRIVER 42” 420-0011-03UK

Sega Amusements Europe Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

email: [email protected] Web: http://www.sega-amusements.co.uk

420-0011-01UK

3rd PRINTING (Rev 2)

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and sufciently understanding the warning displays

and cautions, handle the product appropriately. Be sure to keep this manual close to the product or

in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.

Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will

cause severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause

a potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause

a slight hazardous situation which can result in personal injury and/or material

damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,

this display is attached to places where the instruction manual should be referred to.

Indicates a "protective earth terminal." Before operating the equipment, be sure to connect

it to the ground.

(The step may be omitted for products in which a power cable with earth is used.)

• Performworkinaccordancewiththeinstructionshereinstated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work.

• Besuretoturnoffthepowerbeforeworkingonthemachine.

To prevent an electric shock, be sure to turn off the power and unplug the power cable before

carrying out any work that requires direct contact with the interior of the product. If the work is

to be performed in the power-on status, the instruction manual herein always states to that effect.

• Besuretogroundtheearthterminal.

(Thisisnotrequiredinthecasewhereapowercablewithearthisused.)

This product is equipped with the earth terminal. When installing the product, connect the earth

terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the

product is grounded appropriately, the user can be subject to an electric shock. After performing

repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control

equipment.

• Ensurethatthepowersupplyusedisequippedwithanearthleakagebreaker.

Using a power supply which is not equipped with the earth leakage breaker can cause a re when

earth leakage occurs.

• Besuretousefuseswhichmeetthespeciedrating.

(Onlyforthemachineswhichusefuses.)

Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specicationchanges(removalofequipment,conversionandaddition)not

designatedbySEGAarenotallowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It

is very hazardous to operate the product by removing parts and/or modifying the circuits. Should

doors, lids and protective parts be damaged or lost, refrain from operating the product, and

contact where the product was purchased from or the ofce herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third party,

resulting from the specications not designated by SEGA.

• Ensurethattheproductmeetstherequirementsofappropriateelectrical

specications.

Before installing the product, check for electrical specications. SEGA products have a

nameplate on which electrical specications are described. Ensure that the product is compatible

with the power supply voltage and frequency requirements of the location. Using any electrical

specications different from the designated specications can cause a re and an electric shock.

• Installandoperatetheproductinplaceswhereappropriatelightingisavailable,

allowingwarninglabelstobeclearlyread.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where the

product is operated has sufcient lighting allowing the warnings to be read. If any label is peeled

off, apply it again immediately. Please place an order with where the product was purchased from

or the ofce herein stated.

• Whenhandlingthemonitor,beverycareful.

(Appliesonlytoproductswithmonitors.)

Some of the monitor parts are subject to high tension voltage. Even after turning off the power,

some portions are still subject to high tension voltage sometimes. Monitor repair and replacement

should be performed only by those technical personnel who have knowledge of electricity and

technical expertise.

• Besuretoadjustthemonitorproperly.

(Appliesonlytoproductswithmonitors.)

Do not operate the product leaving on-screen ickering or blurring as it is. Using the product

with the monitor not properly adjusted may cause dizziness or a headache to an operator, a

player, or the customers.

• Whentransportingorresellingthisproduct,besuretoattachthismanualtothe

product.

* In the case where commercially available monitors and printers are used in this product, only the

contents relating to this product are explained herein. Some commercially available equipment

has functions and reactions not stated in this manual. Read this manual together with the specic

instruction manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.

* The contents described herein are fully prepared with due care. However, should any question

arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status.

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

Are casters and adjusters damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct way,

connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and dents?

Are all accessories available?

Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

iii

420-0011-01UK

BEFORE USING THIS PRODUCT - PLEASE READ .......................................... i

TABLE OF CONTENTS.......................................................................................iii

INTRODUCTION................................................................................................. v

1HANDLING AND PRECAUTIONS .............................................................. 1

2PRECAUTIONS REGARDING INSTALLATION LOCATION ...................... 4

3PRECAUTIONS REGARDING PRODUCT OPERATION........................... 8

4PART DESCRIPTIONS............................................................................. 11

5ACCESSORIES ........................................................................................ 12

6ASSEMBLY AND INSTALLATION ............................................................ 14

6-1 Installing the Cabinet .......................................................................................15

6-1-1 Installing the Billboard......................................................................................16

6-1-2 Installing the Billboard Plate ............................................................................16

6-1-3 Installing a Twinned Cabinet............................................................................18

6-2 Fixation to Site .................................................................................................22

6-3 Connecting the Power Cables .........................................................................24

6-4 Turning the Power ON......................................................................................26

6-5 Conrming the Assembly .................................................................................27

6-6 Application of Warning Labels..........................................................................28

7PRECAUTIONS WHEN MOVING THE MACHINE................................... 28

8PLAYING THE GAME ............................................................................... 32

8-1 Game Outline...................................................................................................31

8-2 The Game ........................................................................................................33

8-2-1 Championship..................................................................................................33

8-2-2 Quick Race ......................................................................................................34

8-2-3 Multiplayer........................................................................................................35

8-2-4 Track Selection ................................................................................................36

8-2-5 Car Selection ...................................................................................................37

8-2-6 Transmission....................................................................................................37

8-2-7 Screen Display.................................................................................................38

8-2-9 Camera Positions.............................................................................................38

8-2-10 Hi-Scores .........................................................................................................39

9 TEST AND DISPLAY DATA....................................................................... 40

10 CONTROLLER UNIT ................................................................................ 60

TABLE OF CONTENTS

11 DISPLAY LCD .......................................................................................... 68

12 COIN SELECTOR..................................................................................... 74

13 LIGHTING AND LAMP REPLACEMENT.................................................. 83

13-1 Coin Door Lamp Replacement.........................................................................85

13-2 Billboard Lamps ...............................................................................................84

13-3 Race Leader Lamp...........................................................................................86

13-4 Recovery Lamp................................................................................................88

13-5 Start/View Lamp...............................................................................................90

14 PERIODIC INSPECTION.......................................................................... 94

15 TROUBLESHOOTING.............................................................................. 96

16 GAME BOARD........................................................................................ 100

17 COMMUNICATION ................................................................................. 105

18 DESIGN RELATED PARTS .................................................................... 110

19 PARTS LIST.............................................................................................111

20 WIRE COLOUR CODE........................................................................... 135

21 SCHEMATIC WIRING DIAGRAMS......................................................... 136

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general

operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

"GRID 42"

This manual is intended for the owners, personnel managers in charge of operation of this product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Indicates important information that, if ignored, may result in the mishandling of

the product and cause faulty operation or damage to the product.

Sega Amusements Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

email: [email protected] Web: http://www.segaarcade.com

Play it! Amusements, Inc.

252 Beinoris Drive, Wood Dale, IL 60191, U.S.A

Telephone: 1-847-364-9787 Toll Free: 1-888-877-2669

Facsimile: 1-847-427-1139

SPECIFICATIONS

Standard Cabinet (USA)

Machine Dimensions: 1,24m (48.8in.) [Width] x 1.72m (67.7in.) [Depth]

Machine Height: 2.1m (82.6in.)

Machine Weight: 220kg (Installed)

Power, maximum current: 1x 4A @ 120Vac

Twined Cabinet (EU)

Machine Dimensions: 2.60m (102.3in.) [Width] x 1.72m (67.7in.) [Depth]

Machine Height: 2.1m (82.6in.)

Machine Weight: 430kg (Installed)

Power, maximum current: 2x 2A (465W) @ AC240V (Twinned Cabinet)

INTRODUCTION

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denition of 'Site Maintenence Personnel or Other Qualied Individuals

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualied professionals’ should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

INTRODUCTION

vii

Waste of Electrical and Electronic Equipment (WEEE) Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based

manufacturers and importers of Electrical and Electronic Equipment to take back products at the end of their

useful life. Sega Amusements Europe Ltd accepts its responsibility to nance the cost of treatment and recovery of

redundant WEEE in the United Kingdom in accordance with the specied WEEE recycling requirements.

The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product

must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste

equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical

and electronic equipment.

For more information about where you can send your waste equipment for recycling contact your local authority

ofce.

For non-UK users contact your local authority ofce for information on the recycling of Waste Electrical and

Electronic Equipment.

Battery Recycling Statement.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on

the environment and encourage the recovery of the materials they contain. To achieve increased collection and

recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and

importers of portable, industrial and automotive batteries.

The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates

they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used

batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority

ofce.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

HANDLING PRECAUTIONS

1HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that

the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary matters

herein stated can cause personal injury or damage to the machine.

Before performing work, be sure to turn the power off. Performing the work

without turning the power off can cause an electric shock or short circuit. In

cases where work should be performed in the status of power on, this manual

always states to that effect.

To avoid an electric shock or short circuit, do not plug in or unplug quickly.

To avoid an electric shock, do not plug in or unplug with a wet hand.

Do not expose power cords or earth wires on the surface, (oor, passage,

etc.) If exposed, the power cords and earth wires are susceptible to damage.

Damaged cords and wires can cause an electric shock or short circuit.

To avoid causing a re or an electric shock, do not put things on or damage

the power cords.

When or after installing the product, do not unnecessarily pull the power cord.

If damaged, the power cord can cause a re or an electric shock.

In case the power cord is damaged, ask for a replacement through where

the product was purchased from or the ofce herein stated. Using the cord as

is damaged can cause re, an electric shock or leakage.

Be sure to perform grounding appropriately. Inappropriate grounding can

cause an electric shock.

Be sure to use fuses meeting the specied rating. Using fuses exceeding the

specied rating can cause a re or an electric shock.

Be sure that connections such as IC BD are made properly. Insufcient

insertion can cause an electric shock.

Specication changes, removal of equipment, conversion and/or addition,

not designated by SEGA are not permitted.

Failure to observe this may cause a re or an electric shock. Non-compliance

with this instruction can have a bad inuence upon physical conditions of the

players or the onlookers, or result in injury during play.

SEGA shall not be held responsible for damage, compensation for damage

to a third party, caused by specication changes not designated by SEGA.

Do not perform any work or change parts not listed in this manual. Doing so

may lead to an accident.

If you need to perform any work not listed in this manual, request work from

the ofce indicated in this manual or the point of purchase, or inquires for

details.

Be sure to perform periodic maintenance inspections herein stated.

Tabla de contenidos

Otros manuales de Máquina de juego arcade de Sega

Sega

Sega Sonic & Sega All-Stars Racing Arcade Manual de usuario

Sega

Sega Virtua Fighter 4 Evolution Guía de solución de problemas

Sega

Sega World Series Baseball Super Major League Manual de usuario

Sega

Sega Hot Racer Manual de usuario

Sega

Sega OutRun2 Manual de usuario

Sega

Sega House Of The Dead 3 DELUXE Manual de usuario

Sega

Sega Virtua Striker 4 Manual de usuario

Sega

Sega D2 Manual de referencia

Sega

Sega F355 Challenge Instrucciones de instalación y funcionamiento

Sega

Sega Ghost Squad Deluxe Manual de usuario

Sega

Sega 18 Wheeler Manual de usuario

Sega

Sega SHOOT THIS WIN THIS Manual de usuario

Sega

Sega Daytona USA Manual de usuario

Sega

Sega THE HOUSE OF THE DEAD III DELUXE Manual de usuario

Sega

Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Guía de aplicación

Sega

Sega Let's Go ISLAND! Manual de usuario

Sega

Sega Outrun 2 Suplemento

Sega

Sega Virtua Cop 3 Deluxe Type Manual de usuario

Sega

Sega MARIO & SONIC AT THE OLYMPICS GAMES TOKYO... Manual de usuario

Sega

Sega NAOMI Manual de usuario

Sega

Sega AFTER BURNER CLIMAX Manual de usuario

Sega

Sega Ghost Squad Manual de usuario

Sega

Sega Double Spin Manual de usuario

Sega

Sega Derby Owners Club World Edition Manual de usuario

Manuales populares de Máquina de juego arcade de otras marcas

Universal Space

Universal Space COCONUT BASH Manual de usuario

Bay-Tek

Bay-Tek EVOLVE Manual de usuario

Global VR

Global VR America's Army Instrucciones de instalación y funcionamiento

Atronic

Atronic Cashline Manual de usuario

Universal Space

Universal Space Checky Monkey Manual de usuario

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manual de usuario

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manual de usuario

Family Fun Companies

Family Fun Companies Reactor Guía de inicio rápido

Universal Space

Universal Space FRUIT MANIA Extreme Manual de usuario

falgas

falgas CARRUSEL FIESTA Manual de usuario

Konami

Konami DanceDanceRevolution Manual de usuario

Bay-Tek

Bay-Tek quik drop Manual de usuario

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manual de usuario

Adrenaline

Adrenaline Flying Tickets Instrucciones de instalación y funcionamiento

Swinks

Swinks Stern Pinball Ghostbusters Manual de usuario

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manual de usuario

jakar

jakar SPEED CARS Manual de usuario

Carmelli

Carmelli HAT TRICK NG1015H Manual de usuario