Seeing Machines Guardian Instrucciones de instalación
FIELD SUPPORT MANUAL
Guardian - Generation 2 (Gen2)
Guardian Field Support Manual
1. PURPOSE
The purpose of this manual is to describe the process for the installation, fault finding and
maintenance of Guardian - Generation 2 (Gen 2). Please refer to the Guardian Field
Installation Manual (June 2016) for installations of the Guardian Gen 1.
All Guardian Gen 2 installations must be completed in accordance with this manual.
This document is the standard for Guardian Gen 2 installations.
As per product details below;
Model Name (Product Family): G2-SY-CON2
Product Name: Guardian Split System
Model Type: G2-SY-CON2-1001272, G2-SY-CON2-1001484
Product Name: Guardian System LTE
Model Type: G2-SY-CON2-1002244
Deviation from the process described in this manual may void the warranty of the product
and lead to the suspension of an individual’s certification.
Guardian Field Support Manual
2. SECTIONS
SECTION
TITLE
0.
Preface and Compliance Certificates
1.
Introduction to Guardian Gen 2
2.
Installation of Guardian Gen 2
3.
Service & Maintenance of Guardian Gen 2
Guardian Field Support Manual
3. REFERENCE DOCUMENTS
The below referenced documents can be accessed via the Technical Communication Portal
(TCP) at tcp.seeingmachines.com if you require access to the TCP, please make a request
via the ‘Apply Here’ button on the TCP website.
ITEM
TITLE
1.
Knowledge Base
2.
Installation Checklist
3.
Tutorial videos
Guardian Field Support Manual
4. FCC COMPLIANCY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This product does not contain any user serviceable components. Any unauthorized product
changes or modifications will invalidate warranty and all applicable regulatory certifications
and approvals, including authority to operate this device.
FCC Part 15 Digital Emissions Compliance
We, Seeing Machines, Level 1, 11 Lonsdale St, Braddon, ACT, 2612, Australia, +61 2 6103
4700, declare under our sole responsibility that the product Guardian complies with Part 15
of the FCC Rules.
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
15.105
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
15.21
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Guardian Field Support Manual
5. Canada Certification
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause interference; and (2) This device
must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
Cet appareil et son antenne (s) ne doivent pas être situés ou fonctionner en conjonction
avec une autre antenne ou émetteur.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites
d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance
entre la source de rayonnement et votre corps.
FIELD SUPPORT MANUAL
Section 1 –Introduction to Guardian Generation 2
Guardian Field Support Manual
Table of Contents
1. OVERVIEW.......................................................................................................................................3
2. ABBREVIATIONS ..............................................................................................................................4
3. TERMS .............................................................................................................................................7
4. SAFETY.............................................................................................................................................9
5. PACKAGING...................................................................................................................................10
6. STANDARD COMPONENTS............................................................................................................12
7. OPTIONAL COMPONENTS................................................................ Error! Bookmark not defined.
8. INSTALLATION TOOL KIT (Provided by Trainer) ............................................................................19
9. REQUIRED TOOLS FOR INSTALLATION..........................................................................................20
Guardian Field Support Manual
1. OVERVIEW
The aim of this section is to introduce the acronyms, and components of Guardian
Generation 2 (Gen 2)
Section 1 A certified Guardian Technician must read and understand this section before
commencing a physical installation of the System.
Guardian Field Support Manual
2. ABBREVIATIONS
ABBREVIATION
MEANING
APN
Access Point Name-Relates to SIM Card
CELL
Cellular
-Wireless communications via a communications network
DC
Direct Current
Demo
Demonstration
DSSi
Driver Safety System interface
EMC
Electromagnetic Compatibility
FFC
Forward Facing Camera
Finger Tight
Something tightened with your thumb and two fingers. With or without
a tool. Excessive force may damage the item
FOV
Field Of View
GPS
Global Positioning System
HSE
Health, Safety and the Environment
ICS
In Cab Sensor (also known as the Driver Facing Camera)
IP
Ingress Protection Marking (for use with connectors)
Internet Protocol (for use with computers)
ICS
In-Cab Sensor (may also be called Driver Facing Camera)
IR
Infra-Red
IVS
In-Vehicle System
JHA
Job Hazard Assessment
LAN
Local Area Network
LED
Light Emitting Diode
OJT
On Job Training
PC
Personal Computer
PCB
Printed Circuit Board
PIN
Personal Identification Number
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario