MDVR-J400 Quick Start Guide
8
3.3.1 Adding Your Device
1. Tap the ‘+’ icon on the Home screen.
2. Enter the 15-digit IMEI then tap Add Device to continue
or scan the QR code of your device which is printed on
the top cover of the camera.
3. Enter the device name, number plate of the vehicle,
driver name, contact number and select a device icon.
Tap Save to nish.
3.3.2 Unbinding Your Device
1. Open the Home screen and tap List to enter the Device
List menu.
2. Tap the icon on the device to be unbound.
3. Tap Unbound to continue.
4. Tap OK to conrm.
3.3.3 Device Settings
1. Open the Home screen and tap List.
2. Tap the icon on the device to edit, then tap Settings.
3. You can edit Alert Settings, Overspeed Alert, Driving
Behaviour, Vibration Alert, Crash, LED, Voice, SOS and
Geo-fence Video settings of your device.
3.3.4 Vibration Alarm
• When ACC is ON, Vibration alarm is disabled.
• When ACC is OFF, the Vibration alarm will switch on automatically after 5 minutes. If vibration is detected, the
device will report alarm condition in 5 seconds. If ACC is ON within this 10 second period, the alarm reporting and
vibration alarm will be canceled otherwise it will alarm for 30 seconds.
• After the alarm period, the device stops detecting variation alarm for 1 minute. After 1 minute, it will resume vibration
alarm. The sensitivity of the vibration sensor is adjustable on the App as described above.
Note: MDVR-J400 cameras can only be bound to one
mobile phone at a time. If you want to register the device on
another mobile phone, you must unbind the device on the
original mobile phone rst.
3.3 Binding Your Device to an Account
. . . . . .
Note: DMS (Driver Monitoring System) is only for AI models,
and is not applicable for MDVR-400.
