3
3.3 Device Settings
Go to Main Menu [Refer Picture B]. Select
Device Settings.
B. Main Menu
C. Device Settings
Here, we can Set customer name, save mobile
nos., arm/disarm nos., controlling nos., SMS
and call order, save RFID cards, set date and
time & reset device. [Refer Picture C]
3.3.1 Set Arm/ Disarm Mobile nos.
Arm/ Disarm mobile nos. are those on
which daily system activation and
deactivation timings will be sent
through SMS.
1,2,3 mobile nos. are default for arm/
disarm. If we want to change the
default nos. click on SET ARM/ DISARM
NUMBERS.
For e.g., if we want to change defaults
to 4,5,6 then type 456 and tap OK.
[Refer Picture D]
Likewise, we can change default
controlling nos. in a similar way.
D. Set ARM/ DISARM Nos.
3.4 Timer Settings
Here, we can set entry and exit delay time for
delayed zone, sounder timing and auto timer.
[Refer picture E]
3.4.1 Entry and Exit Timers
We can give delay to delayed (1st) zone only if
we are going to arm/disarm the system by
using RFID card otherwise there is no need to
give entry and exit time delay. [Refer picture
F]
