SecurityMan NDVR8 Manual de usuario

1. Determine whether the camera will be wall or ceiling mount and then

adjust the cameras viewing angle accordingly by loosening the two

screws located on the neck of the mounting bracket with the hex tools

provided.

NOTE: Please test by plugging in all cameras to the recorder prior to

mounting. MOUNTING THE CAMERAS is not applicable for NDVR8

Bare Systems.

2. Secure the cameras in the desired location using the dry wall screws

provided. Make sure not to mount them no more than 60 ft from the

DVR (unless you have purchased additional BNC cable). Adjusted the

camera viewing angles to a desired position.

NDVR8 Series Quick Start Guide

8 Outdoor/Indoor Night Vision Color Cameras with Mobile and Web

Accessible Network Digital Video Recorder

MOUNTING THE CAMERAS

CONNECTING THE CAMERAS TO THE DVR

1 2

3. Connect the power and video (yellow) male ends of the 60ft VP cable

to the female ends of the camera. To prevent electric shock or damage

to the camera, please make sure to properly insolate (not included) the

camera’s power connections if being used as an outdoor application as

shown below.

1. Now that you already have the cameras mounted and the cable ran,

it’s time to connect them to the DVR and power them up. The ﬁrst

thing you want to do is get the female end of the BNC video cables and

connect them to the DVR making sure that you plug-n-twist the BNC

connector clockwise to secure.

2. The last step in setting up the cameras is to power them up. Plug in the

cameras AC adapter into a wall outlet, and then insert the other end

into the power socket located at the end of the VP cable of the camera

as shown below.

CONNECTING THE MOUSE

From Camera

Clockwise

to lock

VP Cable

To Recorder

1. Plug in the USB connection of the mouse to one of the two USB port

located on the back of the DVR as shown below.

CONNECTING THE ETHERNET CABLE (cable not

included)

1. Insert the Ethernet cable that is connected to your network router or

switch into the DVR’s “LAN” Ethernet port located above the two USB

ports on the back of the DVR.

3 4

POWERING UP THE DVR

LOGGING INTO THE DVR

DVR NETWORK SETUP

1. Insert the power adapter into a wall outlet or surge protector

(recommended). Then insert the power jack into the 12VDC power

socket located on the rear of the DVR as illustrated.

2. The DVR will automatically turn on as soon as you plug in the power

jack into the DVR’s power socket. At start up, the DVR will display the

“H.264” start up screen which will then switch to a live view of all 8

cameras after 20 seconds.

1. In order to playback, change settings or use any of the menu options

you must ﬁrst login to the DVR. To do this you can press the MENU

button (twice) located on the front of the DVR or simply RIGHT CLICK

(twice) anywhere on the screen using the mouse to bring up the USER

to login with and input the password that is associated with the user.

There are two user names/passwords that have been created by default

and they are:

• User Name: Admin Password: 888888

• User Name: user1 Password: 666666

Click on the white check mark located on the bottom right corner of the

1. After you successful login to the DVR, advanced to System Settings/

Network/Network to select “DHCP” (Recommended) under Network

Setup “Type” as illustrated below.

1. After selecting the “DHCP” click on the (white check mark)

button to save the setting and exit out from Network Setup. To check

what IP address as been auto assigned to the DVR, go back into the

Network Setup, please jot down the IP address & 8999 web port.

IMPORTANT NOTE: What you just jotted down is your local IP address

used to remote access from within your Local Area Network; this

illustration shows the IP address of 192.168.248.034. Please be noted

that this local IP address will NOT work if you are remote accessing from

the Internet or Wide Area Network.

Next, advanced to System Settings/Network/Network and then to

“Other Settings” to set “ENABLE” both the UPnP and the AutoID as

illustrated below.

IAfter both options are enabled, click on the (white check mark)

button to save the setting and exit out from Other Settings.

2. Finally, jot down the ID which can be found behind the DVR and in

System Settings/System/User as shown below. The AutoID is used for

when you are remote accessing from the outside of your network such

as from the Internet or Wide Area Network (WAN).

IMPORTANT NOTE: Please note that the AutoID cannot be used in your

Local Area Network (LAN).

To ﬁnish setting up the DVR for WAN remote access required setting

the “UPnP” to “Enable” in your local router setting. Here we illustrate

using a NetGear (Model: WPNT834) router to enable the UPnP setting.

5 6

IMAGE #1

IMAGE #3

IMAGE #2

IMAGE #4

IMAGE #5

REMOTE ACCESS USING INTERNET EXPLORER

ActiveX controls and Plug-ins:

1. Enable all Active X controls located in your in your IE Internet options.

To do so, click on “Tools> Internet Options” as shown below [IMAGE

#1/#2].

2. Click on the “Security” tab as shown in IMAGE #3. Then click on

“Internet” and “Custom level”. In the Security Settings window, please

set “Enable” everything under “ActiveX controls and plug-ins” as

illustrated in IMAGE4. Click OK button to accept and exit out from

Security Settings and click “Yes” to accept the conﬁrmation.

3. After conﬁrming your changes, click on “Apply” and “OK” (red arrow) to

close the Internet Options as shown in IMAGE #5.

Remote access within the same network (LAN):

1. After the ActiveX controls and plug-ins setup, open by right mouse

clicking on the IE browser and then select “Ran as administrator” on the

computer that is outside of your network. Once the browser is opened

and type “ http://www.ipremoteview.com “ in the URL.

NOTE: If http://www.ipremoteview.com does not work, please use our

alternative server http://www.ipremoteview.cn for AutoID remote

access.

2. After pressing ENTER, you will be prompted to install the “VIEW_

DvrOcx.ocx” when logging in for the ﬁrst time. Please click on the

“Allow” button to install the required plug-in as illustrated with the red

arrow below.

7 8

5. On a successful login, click on the “START VIEW” button to start live

video streaming from the IE browser as illustrated below.

IMPORTANT NOTE: Although the DVR is truly a plug and play device

there are some cases that you may need to forward ports 8998 (for

Smartphone), 8999(Http Port), 9000(Media Port), and 9001(Setup

Port) in your local router for Internet remote access in Wide Area

Network environment.

REMOTE ACCESS iPHONE

Downloading Application for iPhone:

1. Open the App Store and search for “MobileEye” as shown in IMAGE #1

and then select the free app from the list of apps found [IMAGE #2].

NOTE: Although the app is free, you still need to have an iTunes

account (Apple ID) in order to download and install the app.

IMAGE #1

IMAGE #3

IMAGE #2

IMAGE #4

2. Select the “Free” option from the app description screen and then

select the “INSTALL” option as shown in [IMAGE #3]. Enter your Apple

ID & Password when prompted [IMAGE #4]

3. At the login screen as shown below, click on Compatibility View as

shown in “2”, then input the ID that you should have jotted down under

the DVR Network Setup step 3 section as shown in “3” below, and the

click on Submit button.

4. After submitting, a window as shown below will appear. The address

and port number shown in step “1” below are automatically generated

by our AutoID server. Next, click on the Compatibility View button as

shown in “2”, input “Admin” for the default User ID and “888888” for the

default Password as shown in “3”, and ﬁnally click “Login” as shown in

“4”.

910

Using Mobile Eye Application:

1. In the Mobile Eye application, tap on “Setting” located at the bottom

right corner of the live view screen to enter the application settings and

options interface as shown below.

2. Select “Direct Access” to connect to the DVR by manually inputting in

the IP address (LAN or WAN IP Address) or select “Server Access” to

connect to the DVR by using the AutoID (for WAN remote access only)

as shown below.

3. Then MobileEye will begin the installation process as shown in [IMAGE

#5]. After the installing process is completed, the MobileEye icon will

be created as shown in [IMAGE #6]. Simply tap on the installed Mobile

Eye to start the application.

Direct Access Server Access

The Direct Access “Settings” screen consists of the following

conﬁguration options:

• Server ID: – The IP address of your DVR or Router depending

on whether you are accessing your DVR from within your network or

outside your network. If you are remote accessing from within the same

network of the DVR, please use the DHCP IP address that you should

have jotted down under DVR Network Setup step 1. If you are remote

accessing from outside of you network (WAN), please use the “Server

Access” method as instructed below.

• Port – The mobile port number you assigned to the DVR. We

recommend using the system default port “8998”.

• User ID – The user name used to login to the DVR, the system

default name is “Admin”

• Password – The password associated with the user name, the

system default password is “888888” for the “Admin” login.

The Server Access “Settings” screen consists of the following

conﬁguration options:

• Server ID: – The Server ID under the Server Access “Settings” is

the AutoID in which you should have jotted down under DVR Network

Setup step 3.

• User ID – The user name used to login to the DVR, the system

default name is “Admin”

• Password – The password associated with the user name, the

system default password is “888888” for the “Admin” login.

3. When ﬁnished setting up either Server Access or Direct Access, tap

on “Back” to save and exit out from settings. Next, press the PLAY

button to start video streaming from your iPhone as illustrated below.

SPECIFICATIONS

NAME

Play/Stop

Snapshot

Full Screen

Channel Group

Channel Select

Setting

Tilt UP

Tilt DOWN

Pan LEFT

Pan RIGHT

Zoom IN

Zoom OUT

Focus adjustment

Aperture adjustment

ACTION

Starts and Stops the live view feed from the selected

live view display box.

Takes a snap shot of the current camera.

*Images are saved in the “Photos” of the iPhone.

Tap to bring up full screen display.

Changes the “Channel Select” numeric values.

Pressing the channel group button will change the

values from 1-8 to 9-16.

*Only applies to devices that are equipped with more

than one channel.

Used to select which channel to display on the live

view screen.

*Only applies to devices that are equipped with more

than one channel.

Setup Direct Access (LAN, WAN) or Server Access

(WAN only) remote access.

Tilts the camera upward.