Contents
Mounting and Installation, Technical Description, T 811 065 en 7 / 41
Contents
_________________________________________________________________________________________
1
System overview 9
1.1
Technical data 11
1.2
System limits 11
1.2.1
SecuriFire 500 11
1.2.2
SecuriLine eXtended 11
_________________________________________________________________________________________
2
Housing design & mounting 12
2.1
Integrated B7-MIC11 indication and control map 13
2.2
Drilling plan 13
_________________________________________________________________________________________
3
Interfaces & connections 14
3.1
B7-CPB11 main control unit 14
3.1.1
Interfaces 14
3.1.2
Technical data 14
3.1.3
Compatibility notice 14
3.2
Power supply 15
3.2.1
Mains connection 15
3.2.2
Technical data 15
3.2.3
Emergency power supply (batteries) connection X14 16
3.2.4
Technical data 16
3.2.5
Connection of external consumers 16
3.2.6
Technical data 16
3.2.7
Connection of relay outputs to B7-CPB11 17
3.2.8
Technical data 17
3.2.9
Connection examples 18
3.3
Connection of monitored inputs and outputs 19
3.3.1
Technical data 19
3.3.2
Connection of monitored outputs to B7-CPB11 20
3.3.3
Connection of inputs to B7-CPB11 20
3.4
EPI bus for external indication and control maps (X6) 21
3.4.1
EPI bus (X6) connection 21
3.4.2
Technical data 21
3.5
SecuriLine eXtended 22
3.5.1
SecuriLine eXtended (x12) connection 22
3.5.2
Technical data 22
3.5.3
Compatibility information 22
3.6
Connection of SecuriLine eXtended modules 23
3.6.1
Stub line connection 24
3.6.2
Connecting detector base USB 501 24
3.6.3
Connection of MCP 535x and MCP 545x manual call points 25
3.6.4
Connection of BX-AIM advanced input module 25
3.6.5
BX-IM4 input module connection 26
3.6.6
BX-I2 input module connection 27
3.6.7
BX-IOM input/output module connection 28
3.6.8
BX-OI3 output/input module connection 29
3.6.9
BX-O2I4 output/input module connection 30
3.6.10
BX-O1 output module connection 30
3.6.11
BX-REL4 relay module connection 31
3.6.12
BX-RGW radio module connection 31
3.6.13
Connection of the BX-SOL loop siren 32
3.6.14
Loop flashlight BX-FOL connection 32
3.6.15
Connection of end switch module eXtended Line BX-ESL 33
3.7
Recommended cable type for addressable loop 33
_________________________________________________________________________________________
4
Programming and software 34
_________________________________________________________________________________________
5
Planning 35
5.1
Loop length 35
5.2
Current consumption and bridging time 35
5.3
Typical power consumption values for B7-CPB11 35
5.4
Power requirement calculation 35
5.5
Battery current measurement with a connected battery pair 36
