SebaKMT SmartEAR Manual de usuario

Consultation with SebaKMT

User Manual

Noise logger

SmartEAR

Issue: 0 (09/2022) - EN

Article number: 87869

Mess- und Ortungstechnik

Measuring and Locating Technologies

Elektrizitätsnetze

Power Networks

Kommunikationsnetze

Communication Networks

Rohrleitungsnetze

Water Networks

Abwassernetze

Sewer Systems

Leitungsortung

Line Locating

Consultation with SebaKMT

The present system manual has been designed as an operating guide and for

reference. It is meant to answer your questions and solve your problems in as fast and

easy a way as possible. Please start with referring to this manual should any trouble

occur.

In doing so, make use of the table of contents and read the relevant paragraph with

great attention. Furthermore, check all terminals and connections of the instruments

involved.

Should any question remain unanswered or should you need the help of an authorized

service station, please contact:

Megger Germany GmbH

Dr.-Herbert-Iann-Str. 6

96148 Baunach / Germany

T: +49 / 9544 / 68 –0

F: +49 / 9544 / 22 73

E: [email protected]m

www.sebakmt.com

©SebaKMT

have before-hand declared their consent in writing. The content of this handbook is subject to change without

notice. SebaKMT cannot be made liable for technical or printing errors or shortcomings of this handbook.

SebaKMT also disclaims all responsibility for damage resulting directly or indirectly from the delivery, supply,

or use of this matter.

Terms of Warranty

SebaKMT accept responsibility for a claim under warranty brought forward by a

customer for a product sold by SebaKMT under the terms stated below.

SebaKMT warrant that at the time of delivery SebaKMT products are free from

manufacturing or material defects which might considerably reduce their value or

usability. This warranty does not apply to faults in the software supplied. During the

period of warranty, SebaKMT agree to repair faulty parts or replace them with new parts

or parts as new (with the same usability and life as new parts) according to their choice.

This warranty does not cover wear parts, lamps, fuses, batteries and accumulators.

SebaKMT reject all further claims under warranty, in particular those from consequential

damage. Each component and product replaced in accordance with this warranty

becomes the property of SebaKMT.

All warranty claims versus SebaKMT are hereby limited to a period of 12 months from

the date of delivery. Each component supplied by SebaKMT within the context of

warranty will also be covered by this warranty for the remaining period of time but for 90

days at least.

Each measure to remedy a claim under warranty shall exclusively be carried out by

SebaKMT or an authorized service station.

This warranty does not apply to any fault or damage caused by exposing a product to

conditions not in accordance with this specification, by storing, transporting, or using it

improperly, or having it serviced or installed by a workshop not authorized by SebaKMT.

All responsibility is disclaimed for damage due to wear, will of God, or connection to

foreign components.

For damage resulting from a violation of their duty to repair or re-supply items,

SebaKMT can be made liable only in case of severe negligence or intention. Any liability

for slight negligence is disclaimed.

Since some states do not allow the exclusion or limitation of an implied warranty or of

consequential damage, the limitations of liability described above perhaps may not

apply to you.

Terms of Warranty

Contents

Consultation with SebaKMT...........................................................................................3

Terms of Warranty...........................................................................................................4

1Safety Instructions...........................................................................................6

1.1 General Safety Instructions and Warnings.........................................................6

1.2 General Notes ....................................................................................................6

2Technical data and delivery ............................................................................8

2.1 Technical data....................................................................................................8

2.2 Scope of delivery and optional accessory..........................................................9

3Technical description ....................................................................................10

3.1 Device design...................................................................................................10

3.2 Power supply....................................................................................................12

4First use / SIM card / Battery.........................................................................13

4.1 Introduction and warnings................................................................................13

4.2 First use............................................................................................................13

4.3 Changing the SIM card.....................................................................................15

4.4 Changing the battery........................................................................................15

5Switching SmartEAR on/off...........................................................................16

6SmartEAR-GO!................................................................................................17

6.1 Introduction.......................................................................................................17

6.2 Download and installation ................................................................................17

6.3 Call up the app.................................................................................................17

6.4 User interface...................................................................................................18

6.4.1 Start screen......................................................................................................18

6.4.2 Main menu........................................................................................................19

6.4.3 Help & Settings.................................................................................................20

6.5 Basic settings ...................................................................................................21

7SmartEAR installing and programming.......................................................23

Safety Instructions

1 Safety Instructions

1.1 General Safety Instructions and Warnings

NOTICE

•Do not drop the device / the system’s components or subject it / them to

strong impacts or mechanical shocks.

•The limits described under Technical Data may not be exceeded.

•The device / system must be in a technically perfect condition for

measurement.

•If the O-ring rubber seal of the cover is obviously damaged, it must be

replaced in order to ensure the total protection against water and dust

ingress.

1.2 General Notes

This manual contains basic instructions for the commissioning and operation of the

device / system. For this reason, it is important to ensure that the manual is always

available to the authorised and trained operator. He needs to read the manual

thoroughly. The manufacturer is not liable for damage to material or humans due to non-

observance of the instructions and safety advices provided by this manual.

Locally applying regulations have to be observed!

The following signal words and symbols are used in this manual and on the product

itself:

Signal word /

symbol

Description

CAUTION

Indicates a potential hazard which may result in moderate or minor

injury if not avoided.

NOTICE

Indicates a potential hazard which may result in material damage if

not avoided.

Serves to highlight warnings and safety instructions.

As a warning label on the product it is used to draw attention to

potential hazards which have to be avoided by reading the manual.

Serves to highlight important information and useful tips on the

operation of the device/system. Failure to observe may lead to

unusable measurement results.

Check the contents of the package for completeness and visible damage right after

receipt. In the case of visible damage, the device must under no circumstances be taken

into operation. If something is missing or damaged, please contact your local sales

representative.

It is important to observe the generally applicable regulations of the country in which the

device will be operated, as well as the current national accident prevention regulations

and internal company directives (work, operating and safety regulations).

Use genuine accessories to ensure system safety and reliable operation. The use of

other parts is not permitted and invalidates the warranty.

Safety precautions

Labelling of safety

instructions

Check contents

Working with products

from SebaKMT

Safety Instructions

Repair and maintenance work has to be carried out by SebaKMT or authorised service

partners using original spare parts only. SebaKMT recommends having the system

tested and maintained at a SebaKMT service centre once a year.

SebaKMT also offers its customers on-site service. Please contact your service centre if

needed.

This device is designed for industrial use. When used at home it could cause

interference to other equipment, such as the radio or television.

The interference level from the line complies with the limit curve B (living area), the

radiation level complies with the limit curve A (industrial area) according to EN 55011.

Given that living areas are sufficiently far away from the planned area of operation

(industrial area), equipment in living areas will not be impaired.

The lithium batteries of the device are dangerous goods. The transport of the batteries

itselves and of devices which contain such batteries is subject to regulations based on

the UN Model Regulations “Transport of Dangerous Goods” (ST/SG/AC.10-1).

Please inform yourself about the transportation requirements and follow them when

shipping the device.

Repair and

maintenance

Electromagnetic

radiation

Special transportation

requirements

Technical data and delivery

2 Technical data and delivery

2.1 Technical data

SmartEAR is distinguished by the following technical parameters:

Mechanics

Display

blue LED

Operating temperature

-20° C to +70° C / 0° F to +160° F

Storage temperature

-20° C to +70° C / 0° F to +160° F

Protection class

IP68 (3m/120h) (10m/24h) / (10ft/120h) (30ft/24h)

Commissioning

via SmartEAR-GO! mobile app

Electronics

Processor

32 bit

Anti-theft protection

Motion sensor

On/Off

Magnetic switch

Power supply

Lithium battery 3.6 V / 13 Ah

Battery lifetime

Up to 9 years

Battery change

Possible on site, IP68 remains

Measuring modes

Night measurement

Measurement: 2:00 bis 4:00

Upload: 5:00

Permanent measurement

Every 15 minutes / hourly upload

Customised measurement

Multiple measurement cycles, freely selectable upload times

and lengths of audio files

Communication

Long-range radio

NB-IoT, LTE-M (combined modem)

Short-range radio

Bluetooth® Low Energy

Transmission protocol

MQTT

Technical data and delivery

Housing

Height

122 mm / 4.8 in

Diameter

69 mm (max. 79 mm) / 2.7 in (max. 3.1 in)

Weight

450 g

Material

A2 stainless steel, PPH and PPS

Mounting options

Magnet, magnetic ring, threaded adapter

Anti-theft protection

Magnetic ring with stainless steel cable

2.2 Scope of delivery and optional accessory

The standard delivery includes the following components:

Part

Art.no.

SmartEAR, NB-IoT noise logger without SIM card;