
Display Description
If the device logo remains permanently on the display during the start-
up process, the USB port of your PC / Laptop may be disturbed or
blocked. In this case, use the supplied Micro-USB cable or use another
USB port of your PC / Laptop. If the Seal One device is used inside a
FRPSDQ\SOHDVHFRQWDFW\RXUDGPLQLVWUDWRU+HLVDEOHWRXQORFNWKH
6HDO2QHGHYLFHEDVHGRQWKH86%9HQGRU3URGXFW,'
5NHBDØNTSOTSØHMØ&DQL@MØm2D@KØ.MDØV@QSDSØ@TEØ OOKHJ@SHNMRRS@QSn
Seal One 2200 TF is connected via USB but cannot communicate with
WKH3&/DSWRS$SRVVLEOHFDXVHLVWKDWWKH6HDO2QHDSSOLFDWLRQ
has not been started. Start the Seal One application (Note: There is no
SK\VLFDO&'UHTXLUHGWRVWDUWWKHDSSOLFDWLRQDYLUWXDO&'GULYHLVSURYLG
ed automatically). If the application is started and still the displayed icon
is shown, please check the Micro-USB cable used. The usage requires
a Micro-USB data cable. Some Micro-USB cables, e.g. supplied with
some mobile phones, are pure charging cables. Those cannot be used.
$OZD\VXVHWKHRULJLQDOFDEOHVXSSOLHGE\6HDO2QH
5NHBDØNTSOTSØHMØ&DQL@MØm2D@KØ.MDØ5DQAHMCTMFØVHQCØGDQFDRSDKKSm
The connection between Seal One 2200 TF and the internet is beeing
established.
+LQW7KHDUURZVDUHEOLQNLQJ
5NHBDØNTSOTSØHMØ&DQL@MØm2D@KØ.MDØUDQATMCDMm
The Seal One 2200 TF is connected to the internet and ready to use.
+LQW7KHDQLPDWLRQRIWKHDUURZVLVPRYLQJ
5NHBDØNTSOTSØHMØ&DQL@MØm2D@KØ.MDØ5DQAHMCTMFØFDSQDMMSn
There is no connection between the Seal One 2200 TF and the internet.
Please check if the PC / Laptop has an active connection to the internet.
0D\EHWKHLQWHUQHWFRQQHFWLRQLVEORFNHGE\DÛUHZDOO$OORZDOOLQFRPLQJ
and outgoing Seal One connections.
+LQW7KHZDUQLQJVLJQLVEOLQNLQJ
5NHBDØNTSOTSØHMØ&DQL@MØØ(#ØHRØDW@LOK@QXØ
m2D@KØ.MDØ1DFHRSQHDQTMFØ2D@KØ.MDØ(#Ø&Ø&&Ø&&'m
7KH6HDO2QH,'LVQHHGHGWRHQUROOZLWKDQDFFHSWDQFHSDUWQHU,WZLOO
show when you press and hold the “OK“ button for at least
VHFRQGV$VVRRQDV\RXU6HDO2QHGHYLFHLVVXFFHVVIXOO\UHJLVWHUHGLW
changes to the mode „ready to use“.
1RWH,QFDVH\RXZDQWWRGLVFRQWLQXHGLVSOD\LQJWKH6HDO2QH,'
without enrolling with a partner, push the button for at least 3 seconds
once more.
Seal One 2200 TF sets itself into an energy saving mode after few minu-
WHVLQRUGHUWRLQFUHDVHLWVRSHUDWLQJOLIHWLPH$VVRRQDVDWUDQVDFWLRQ
arrives in this state, the energy saving mode is discontinued automati-
cally and the arriving transaction is displayed.
For more information visit: https://www.seal-one.com/service
ØØØ2XLANKRØ@MCØSGDHQØ,D@MHMF