Seagate HAWK 4 Famil Manual de usuario

HAWK 4 Family:

. . . . . . . . . . . . . . . . . . . . . . .

(Wide Bus)

ST15230W/WD/WC

. . . . . . . . . . . . . . . . . . . . . . .

ST15230DC

. . . . . . . . . . . . . . . . . . . . . . .

Installation Guide

Contents

Introduction........................................................... 1

Electromagneticinterference ................................ 1

Before you begin .................................................. 3

Installation overview....................................... 8

Product repair information .................................... 10

Shipping ......................................................... 11

Product repair and return information............. 11

Technical support services............................. 12

Drive specifications............................................... 15

Initial set-up information........................................ 18

Drive configuration................................................ 23

Drive installation ................................................... 33

Publication Number: 77767477, Rev. A

October 1994

Seagate®,SeagateTechnology®andtheSeagatelogo

areregisteredtrademarksofSeagateTechnology,Inc.

HawkTM, SeaFAXTM, SeaFoneTM, SeaTDDTM and

SeaBOARDTM aretrademarksofSeagateTechnology,

Inc.Otherproductnamesareregisteredtrademarksor

trademarks of their own.

Seagate reserves the right to change, without notice,

product offerings of specifications. No part of this

publication may be reproduced in any form without

written permission from Seagate Technology, Inc.

Hawk 4 (Wide) Family Install Guide, Rev. A 1

___________________________________________

Introduction

Beforeattemptinganyinstallation,pleasereadthrough

all applicable sections of this document, including all

warnings and cautions.

Warning. This equipment generates, uses and can

radiate radio frequency energy and if not

installedin accordance with these instruc-

tions,maycauseinterferencetoradiocom-

munications.

Electromagnetic interference (EMI) con-

siderations

The drive(s) described herein, as delivered, are de-

signed for system integration and installation into a

suitable enclosure prior to use. As such, the drive(s)

described herein are supplied as a sub-assembly and

arenotsubjecttoSubpartJofPart15oftheFCCRules

and Regulations nor the Radio Interference Regula-

tionsoftheCanadianDepartmentofCommunications.

However,theunithasbeentestedusingpropershield-

ing and grounding and found to be compliant with the

ClassAlimitsoftheFCCRulesandtheRegulations of

the Canadian Department of Communications.

2 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

The physical design characteristics of the drive(s)

described herein, serve to minimize EMI radiation

when installed in an enclosure that provides reason-

able shielding. As such, the drive(s) are capable of

meeting the Class B limits of the FCC Rules and the

RegulationsoftheCanadianDepartmentofCommuni-

cations.

Note. It is the end users' responsibility to assure that

the drive(s) described herein meet the appro-

priateEMIrequirementsoftheirsystem.Shielded

I/Ocablesmayberequirediftheenclosuredoes

notprovideadequateshielding. IfI/Ocables are

externaltotheenclosure,shieldedcablesshould

beused, with theshieldsgrounded to theenclo-

sure and to the host controller.

Hawk 4 (Wide) Family Install Guide, Rev. A 3

___________________________________________

Before you begin

Verify that the system is switched off and discon-

nected from main power before any installation is

attempted.

Protect yourself, the drive, and your valuable pro-

grams and data by reading the following cautions

and warnings.

•Donot unpackdrivefrom its staticshielded bag until

you are ready to install it in the system.

•Always handle the drive by the frame or casting.

•Do not touch printed circuit board (PCB) or the I/O

connector pins.

•Never apply pressure to the PCB or to the drive top

cover.

•Donot tamperwithsealed top cover.Doing so voids

your warranty. The drive contains no user service-

able components. See Product Repair section for

moreinformation.

•Visually inspect the shipping container for any obvi-

ous damage.

4 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

•Inspectdriveforpossibleshippingdamage.Allclaims

of this type should be filed promptly with the trans-

porterinvolved.Saveoriginalpackingmaterialstobe

used when reshipping.

•Verifyallpartslistedonshippingbillarereceivedwith

theequipment.Discrepanciesor damage should be

reported to the shipping company.

•When transporting or shipping a drive or system,

please ensure that they are correctly packed in

original Seagate approved (or equivalent) container

and shipped via an air-ride carrier experienced in

handling computer equipment.

Caution. Thecircuitassembliesandcomponentscon-

tainedinthisequipmentcanbedegradedor

destroyedbyElectrostaticOverstress(EOS)

or by Electrostatic Discharge (ESD).

Static electrical charges can accumulate

quicklyonpersonnel,clothingandsynthetic

materials. The electrostatic fields due to

these charges when brought in close prox-

imity to susceptible circuit assemblies and

components,canresultindegradedreliabil-

ity or immediate failure of the affected com-

ponent or assembly.

Hawk 4 (Wide) Family Install Guide, Rev. A 5

___________________________________________

To insure optimum reliable equipment op-

eration, it is required that technical support

personneldischargethemselvesbywearing

a grounding strap around the wrist and be

connected to a grounding terminal while

workingin thevicinity of,andwhile handling

EOS/ESD susceptible assemblies/parts. If

unavailable, ground yourself frequently by

touching the metal chassis of the system

beforehandlinganycomponents(thishelps

onlyifthesystemisconnectedtoaground).

Avoid static-inducing carpeted areas.

This

procedureisespeciallyimportantwhenhan-

dling printed circuit boards (PCBs).

6 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Safety instructions

1. The disc drive(s) are to be installed in a customer

suppliedenclosurewherethesurroundingairdoes

not exceed 50oC.

2. Four (4) 6-32 UNC-2A screws are required for

installation. Maximum screw length into side of

drive is 0.15 inches (3.81 mm). Maximum screw

lengthintobottomis0.20in.(5.08mm).Maximum

screw tightening torque is 6.0 in-lb (.675 NM) with

minimumthreadengagementof.12in.(3.05mm).

3. Thepower requirements areshown in Section1.0

ProductInformation.

4. The power supply must satisfy the safety require-

ments for SELV (Safety Extra Low Voltage) cir-

cuits.

5. Service is to be provided by trained Seagate ser-

vice personnel.

6. The incorporation of the disc drives listed in this

guide into a customer enclosure must meet the

appropriate safety requirements of the country in

which it is used (e.g. UL 1950, CAN/CSA-C22.2

No.950-M89,DINVDE0805:1993andEN60950:

1992 (IEC 950).

Note. Power must be off when connecting or discon-

necting.

Hawk 4 (Wide) Family Install Guide, Rev. A 7

___________________________________________

Sicherheitsanleitung

1. DäsGerätisteinEinbaugerät,vorgesehenfüreine

maximale Umgebungstemperatur von 50oC.

2. Zur Befestigung der Drive werden 4 Schrauben

benötigt (6-32 UNC-2A). Die maximale Länge der

Schrauben in der unteren Seite des Chassis darf

nicht mehr als 0.20 in (5.08 mm) betragen, die in

der oberen 0.15 in (3.81 mm). Maximalle

Schraubenanziehung von 6.0 in-lb. (.675 NM) mit

minimalen Gewindeansperuch .12 in. (3.05 mm).

3. Die Versorgungsspannungen werden im Kapitel

1.0 (Produkt Information) gezeigt.

4. Die Versorgungsspannung muss SELV entspre-

chen.

5. AlleArbeitendürfennurvonausgebildetemSeagate

Service-Personal durchgefürhrt werden.

6. Der Einbau des Drives muss den Anforderungen

gemässDINVDE0805:1993oderEN60950:1992

(IEC 950).

Vorsicht

ÁnsehlussoderEntfernungolerGeräteverbindungnur

beiabgeschalteterVersorgungsspannungvornehmen.

8 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Installation Overview

Installation of the drive can be divided into distinct

phases as outlined below. Some of these may not be

applicable to your particular installation requirements.

Refer to the individual drive installation sections for

specific information on your drive model.

•Driveconfiguration:Theusermustselectwhichof

thedrivefeaturesareappropriatetoenableforinstal-

lationintheirsystem.Thisisdonebywayoftheuser

configuration jumpers found on the drive PCB.

•Mechanical installation: After setting up the drive

configuration the drive must be mechanically in-

stalledinto the host system and the power and I/O

cables attached. Previously mentioned precautions

should be observed

•SCSI drives should not be defined in the CMOS:

The SCSI Host adapter has its own BIOS to handle

the Input/output procedures. The CMOS setting for

SCSI drive is either drive type zero, or the "no drive

installed"option.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Seagate

Seagate

Seagate FDE.2 - Momentus 5400 120 GB Hard Drive Manual de usuario

Seagate

Seagate Duet Manual de usuario

Seagate

Seagate ST2000DX001 Manual de usuario

Seagate

Seagate 1200 SSD Manual de usuario

Seagate

Seagate ST6000NM000B Manual de usuario

Seagate

Seagate ST310014ACE Manual de usuario

Seagate

Seagate Ultra Touch Manual de usuario

Seagate

Seagate Medalist 8421 Manual de usuario

Seagate

Seagate Barracuda ST250DM000 Manual de usuario

Seagate

Seagate ST3146807FC - Cheetah 146.8 GB Manual de usuario

Seagate

Seagate Medalist 17242 Manual de usuario

Seagate

Seagate ULTRA ATA ST310212A Manual de usuario

Seagate

Seagate Cheetah 15K.6 SAS Manual de usuario

Seagate

Seagate ST3320410SV - SV35.4 Series 320 GB Hard... Instrucciones de funcionamiento y seguridad

Seagate

Seagate 7200.9 - Barracuda 7200.9 Hard Drive Manual de usuario

Seagate

Seagate 1200 Manual de usuario

Seagate

Seagate Cheetah 15K Manual de usuario

Seagate

Seagate ST8000VX000 Manual de usuario

Seagate

Seagate Constellation ES ST31000524NS Manual de usuario

Seagate

Seagate ST9160511NS - Constellation 7200 160 GB Hard... Manual de usuario

Seagate

Seagate TapeStor STT28000a Manual de usuario

Seagate

Seagate SKYHAWK ST8000VX004 Manual de usuario

Seagate

Seagate SKYHAWK AI ST18000VE000 Manual de usuario

Seagate

Seagate Barracuda V Serial ATA Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario