Sea Tel 2406-7 Instrucciones de funcionamiento

Sea Tel, Inc.

4030 Nelson Avenue

Concord, CA 94520

Tel: (925) 798-7979

Fax: (925) 798-7986

Email: sea[email protected]om

Web: : www.cobham.com\seatel

Sea Tel Europe

Unit 1, Orion Industrial Centre

Wide Lane, Swaythling

Southampton, UK S0 18 2HJ

Tel: 44 (0)23 80 671155

Fax: 44 (0)23 80 671166

Email: sea[email protected]om

Web: www.cobham.com\seatel

Sea Tel Inc doing business as Cobham SATCOM

December 16, 2009 Document. No. 126843 Revision D

CAUTION: This stabilized antenna system is designed to be used with transmit/receive equipment manufactured

by others. Refer to the documentation supplied by the manufacturer which will describe potential hazards,

including exposure to RF radiation, associated with the improper use of the transmit/receive equipment. Note that

the transmit/receive equipment will operate independently of the stabilized antenna system. Prior to work on

the stabilized antenna system, the power to the transmit/receive system must be locked out and

tagged.

When the transmit/receive system is in operation, no one should be allowed anywhere within the radiated

beam being emitted from the reflector.

The ultimate responsibility for safety rests with the facility operator and the individuals who work

on the system.

INSTALLATION AND OPERATION

MANUAL FOR SEA TEL BROADBAND-AT-SEA

TRANSMIT / RECEIVE SYSTEM

MODEL: 2406-7

These commodities, technology or software were exported from the United

States in accordance with the Export Administration Regulations. Diversion

contrary to U.S. law is prohibited.

Sea Tel Marine Stabilized Antenna systems are manufactured in the United

States of America.

Sea Tel is an ISO 9001:2000 registered company. Certificate Number 19.2867 was issued

August 12, 2005. Sea Tel was originally registered on November 09, 1998.

The Series 06 Family of Marine Stabilized Antenna Pedestals with DAC-2202 Antenna Control

Unit complies with the requirements of European Norms and European Standards EN 60945

(1997) and prETS 300 339 (1998-03). Sea Tel European Union Declaration of Conformity for

this equipment is contained in this manual.

may not be reproduced or distributed in any form without the consent of Sea Tel, Inc. The information in this

document is subject to change without notice.

Revision History

REV ECO# Date Description By

A N/A December 7, 2007 Production Release. MDN

B N/A May 2, 2008 Updated text & drawings MDN

C N/A January 23, 2009 Change BUC to 8W NJRC. Updated text, & drawings. Updated font &

logo.

MDN

D N/A December 16, 2009 Updated Text, Graphics, and Drawings to reflect current build and GSR2

features

ECM

Table of Contents 2406-7 Broadband At Sea

1. INTRODUCTION ..........................................................................................................................................................................................1-1

1.1. GENERAL SYSTEM DESCRIPTION.......................................................................................................................................................................1-1

1.2. PURPOSE..................................................................................................................................................................................................................1-1

1.3. SYSTEM COMPONENTS........................................................................................................................................................................................1-1

1.4. GENERAL SCOPE OF THIS MANUAL....................................................................................................................................................................1-1

1.5. QUICK OVERVIEW OF CONTENTS......................................................................................................................................................................1-1

2. OPERATION.....................................................................................................................................................................................................2-1

2.1. SYSTEM POWER-UP..............................................................................................................................................................................................2-1

2.2. ANTENNA INITIALIZATION ................................................................................................................................................................................2-1

2.3. ANTENNA STABILIZATION .................................................................................................................................................................................2-1

2.4. STABILIZED PEDESTAL ASSEMBLY OPERATION.............................................................................................................................................2-1

2.5. TRACKING OPERATION........................................................................................................................................................................................2-1

2.6. ANTENNA POLARIZATION OPERATION............................................................................................................................................................2-2

2.7. LOW NOISE BLOCK CONVERTER OPERATION.................................................................................................................................................2-2

2.8. RF EQUIPMENT .....................................................................................................................................................................................................2-2

2.9. FCC TX MUTE FUNCTION.................................................................................................................................................................................2-2

2.10. RADOME ASSEMBLY OPERATION......................................................................................................................................................................2-2

3. BASIC SYSTEM INFORMATION........................................................................................................................................................3-1

3.1. SATELLITE BASICS ................................................................................................................................................................................................3-1

3.1.1. Ku-Band Frequency (10.95-12.75GHz) ..............................................................................................................................3-1

3.1.2. Signal level ..........................................................................................................................................................................................3-2

3.1.3. Satellite Footprints ........................................................................................................................................................................3-2

3.1.4. Satellite polarization .....................................................................................................................................................................3-2

3.2. ANTENNA BASICS.................................................................................................................................................................................................3-2

3.2.1. Unlimited Azimuth .........................................................................................................................................................................3-2

3.2.2. Elevation...............................................................................................................................................................................................3-3

3.2.3. Antenna Reflector/Feed Assembly.......................................................................................................................................3-3

3.2.4. Antenna polarization ....................................................................................................................................................................3-3

3.2.5. Fixed frequency, Dual or Tri-band LNBs............................................................................................................................3-3

3.2.6. Stabilization........................................................................................................................................................................................3-3

3.2.7. Search Pattern..................................................................................................................................................................................3-3

3.2.8. Tracking Receiver – Single Channel Per Carrier Receiver.......................................................................................3-3

3.2.9. Tracking ................................................................................................................................................................................................3-4

3.3. COMPONENTS OF THE SYSTEM CONFIGURATION ........................................................................................................................................3-4

3.3.1. Antenna ADE Assembly ..............................................................................................................................................................3-4

3.3.2. Antenna Control Unit ...................................................................................................................................................................3-4

3.3.3. Above Decks AC Power Supply...............................................................................................................................................3-5

3.4. POSITIVE SATELLITE ID ......................................................................................................................................................................................3-5

3.5. OPEN ANTENNA-MODEM INTERFACE PROTOCOL (OPENAMIP™) SPECIFICATION:...........................................................................3-5

3.5.1. Overview:..............................................................................................................................................................................................3-5

3.5.2. Interface requirements:..............................................................................................................................................................3-6

3.5.3. Utilized OpenAMIP Commands: ............................................................................................................................................3-6

4. INSTALLATION.............................................................................................................................................................................................4-1

4.1. UNPACKING AND INSPECTION ..........................................................................................................................................................................4-1

4.2. SITE SELECTION ABOARD SHIP.........................................................................................................................................................................4-1

4.3. ASSEMBLY NOTES AND WARNINGS.................................................................................................................................................................4-1

4.4. INSTALLING THE ABOVE-DECKS EQUIPMENT (ADE) ..................................................................................................................................4-2

4.4.1. 34” Radome Assembly .................................................................................................................................................................4-2

2406-7 Broadband At Sea Table of Contents

4.4.2. Antenna Pedestal Mechanical Checks ...............................................................................................................................4-2

4.5. CABLE INSTALLATION..........................................................................................................................................................................................4-3

4.5.1. Shipboard Cable Installation ...................................................................................................................................................4-3

4.5.2. Cable Terminations In The Radome....................................................................................................................................4-3

4.6. BELOW DECKS EQUIPMENT................................................................................................................................................................................4-4

4.6.1. Antenna Control Unit Connections......................................................................................................................................4-4

4.6.2. Terminal Mounting Strip Connections...............................................................................................................................4-4

4.6.3. Control Cable Connections.......................................................................................................................................................4-4

4.6.4. NMEA GPS, Modem Lock & TX Inhibit Output Cable Connections ..................................................................4-4

4.6.5. Ships Gyro Compass Connections........................................................................................................................................4-4

4.6.6. IF Cable Connections...................................................................................................................................................................4-4

4.6.7. AGC Tracking Input Connections .........................................................................................................................................4-4

4.7. BROADBAND CONNECTIONS BELOW DECKS..................................................................................................................................................4-4

4.8. SET-UP &CONFIGURATION...............................................................................................................................................................................4-4

5. SET-UP & CONFIGURATION................................................................................................................................................................ 5-1

5.1. OPERATOR SETTINGS...........................................................................................................................................................................................5-1

5.2. OPTIMIZING TARGETING (AUTO TRIM).........................................................................................................................................................5-1

5.3. OPTIMIZING TARGETING (MANUALLY)..........................................................................................................................................................5-1

5.4. OPTIMIZING AUTO-POLARIZATION TX/RX ..................................................................................................................................................5-2

5.5. CALIBRATING RELATIVE ANTENNA POSITION (HOME FLAG OFFSET) ....................................................................................................5-2

5.5.1. To Calculate HFO:...........................................................................................................................................................................5-2

5.5.2. To Enter the HFO value:..............................................................................................................................................................5-4

5.6. RADIATION HAZARD AND BLOCKAGE MAPPING (AZ LIMIT PARAMETERS) ........................................................................................5-4

5.7. TX POLARITY SETUP............................................................................................................................................................................................5-5

5.8. TRACK DISP........................................................................................................................................................................................................5-5

5.9. DEFAULT SETUP PARAMETERS ..........................................................................................................................................................................5-6

6. FUNCTIONAL TESTING .......................................................................................................................................................................... 6-1

6.1. ACU /ANTENNA SYSTEM CHECK ....................................................................................................................................................................6-1

6.2. LATITUDE/LONGITUDE AUTO-UPDATE CHECK .............................................................................................................................................6-1

6.3. SHIP HEADING –GYRO COMPASS FOLLOWING CHECK..............................................................................................................................6-1

6.4. AZIMUTH &ELEVATION DRIVE.........................................................................................................................................................................6-1

6.5. FOUR QUADRANT TRACKING TEST..................................................................................................................................................................6-1

6.6. BLOCKAGE SIMULATION TEST...........................................................................................................................................................................6-2

6.7. TEST BROADBAND OPERATION .........................................................................................................................................................................6-2

7. MAINTENANCE AND TROUBLESHOOTING .............................................................................................................................. 7-1

7.1. WARRANTY INFORMATION................................................................................................................................................................................7-1

7.2. RECOMMENDED PREVENTIVE MAINTENANCE...............................................................................................................................................7-1

7.2.1. Check ACU Parameters ...............................................................................................................................................................7-2

7.2.2. Latitude/Longitude Auto-Update check ............................................................................................................................7-2

7.2.3. Heading Following..........................................................................................................................................................................7-2

7.2.4. Azimuth & Elevation Drive.........................................................................................................................................................7-2

7.2.5. Test Tracking .....................................................................................................................................................................................7-2

7.2.6. Visual Inspection -Radome & Pedestal ..........................................................................................................................7-2

7.2.7. Mechanical Checks ........................................................................................................................................................................7-2

7.2.8. Check Balance...................................................................................................................................................................................7-2

7.2.9. Observe Antenna Initialization...............................................................................................................................................7-2

7.3. TROUBLESHOOTING..............................................................................................................................................................................................7-3

7.3.1. Theory Of Stabilization Operation........................................................................................................................................7-3

Table of Contents 2406-7 Broadband At Sea

vii

7.3.2. Series 06 TXRX Antenna Initialization................................................................................................................................7-3

7.3.3. Troubleshooting using DacRemP..........................................................................................................................................7-4

7.3.4. Antenna Loop Error Monitoring.............................................................................................................................................7-5

7.3.5. Reference Sensor Monitoring .................................................................................................................................................7-6

7.3.6. Open Loop Rate Sensor Monitoring ....................................................................................................................................7-7

7.3.7. Open Loop Motor Test.................................................................................................................................................................7-9

7.3.8. To Disable/Enable DishScan.....................................................................................................................................................7-9

7.3.9. Satellite Reference Mode...........................................................................................................................................................7-9

7.3.10. To Read/Decode an ACU Error Code 0008 (Pedestal Function Error): .......................................................7-10

7.3.11. Remote GPS LAT/LON Position:...........................................................................................................................................7-12

7.4. MAINTENANCE...................................................................................................................................................................................................7-13

7.4.1. Balancing the Antenna .............................................................................................................................................................7-13

7.4.2. To Adjust Tilt:..................................................................................................................................................................................7-14

7.4.3. To Reset/Reinitialize the Antenna:.....................................................................................................................................7-15

7.5. PEDESTAL CONTROL UNIT CONFIGURATION –SERIES 06.....................................................................................................................7-16

7.5.1. To configure the PCU; ...............................................................................................................................................................7-16

7.5.2. Model Configuration Numbers............................................................................................................................................7-16

8. 2406-7 TECHNICAL SPECIFICATIONS ........................................................................................................................................8-1

8.1. ANTENNA REFLECTOR/FEED 2406..................................................................................................................................................................8-1

8.2. RF EQUIPMENT .....................................................................................................................................................................................................8-1

8.3. PEDESTAL CONTROL UNIT..................................................................................................................................................................................8-1

8.4. STABILIZED ANTENNA PEDESTAL ASSEMBLY ................................................................................................................................................8-2

8.5. RADOME ASSEMBLY,34” ...................................................................................................................................................................................8-2

8.6. UNLIMITED AZIMUTH MODEM/MULTIPLEXER (3 CHANNEL)...................................................................................................................8-3

8.7. ADE PEDESTAL POWER REQUIREMENTS: .......................................................................................................................................................8-3

8.8. ENVIRONMENTAL CONDITIONS (ABOVE DECKS EQUIPMENT)..................................................................................................................8-4

8.9. BELOW DECKS EQUIPMENT................................................................................................................................................................................8-4

8.9.1. DAC-2202 Antenna Control Unit (ACU) ............................................................................................................................8-4

8.9.2. Terminal Mounting Strip (TMS)..............................................................................................................................................8-4

8.9.3. Satellite Modem...............................................................................................................................................................................8-4

8.9.4. Router ....................................................................................................................................................................................................8-4

8.10. CABLES ....................................................................................................................................................................................................................8-5

8.10.1. Antenna Control Cable (Provided from ACU-Base MUX)........................................................................................8-5

8.10.2. Antenna L-Band IF Coax Cables (Customer Furnished) ..........................................................................................8-5

8.10.3. AC Power Cable Above Decks (Customer Furnished) ...............................................................................................8-5

8.10.4. Gyro Compass Interface Cable (Customer Furnished)............................................................................................8-5

9. DRAWINGS ......................................................................................................................................................................................................9-1

9.1. 2406-7 KU-BAND MODEL SPECIFIC DRAWINGS .......................................................................................................................................9-1

9.2. 2406 GENERAL DRAWINGS ..............................................................................................................................................................................9-1

2406-7 Broadband At Sea Table of Contents

viii

This Page Intentionally Left Blank

Introduction 2406-7 Broadband At Sea

1-1

1. Introduction

WARNING: RF Radiation Hazard -This stabilized antenna system is designed to be used with

transmit/receive equipment manufactured by others. Refer to the documentation supplied by the

manufacturer which will describe potential hazards, including exposure to RF radiation, associated with

the improper use of the transmit/receive equipment. Note that the transmit/receive equipment will

operate independently of the stabilized antenna system.

The ultimate responsibility for safety rests with the facility operator and the individuals who

work on the system.

1.1.General System Description

Your system includes a fully stabilized antenna that has been designed and manufactured so as to be inherently

reliable, easy to maintain, and simple to operate. The equipment essentially permits unattended operation except for

start-ups or when changing to different transponders, or satellites.

1.2.Purpose

This shipboard Transmit-Receive (TXRX) system provides you with two-way satellite voice/data broadband

communications while underway on an ocean-going vessel. This can be used to provide a wide variety of telephone,

fax and high speed data applications. Your antenna system can transmit to and receive from any desired Ku-band

satellite which has adequate signal coverage in your current geographic area. This input will be distributed to your

satellite modem and then to all of your other below decks computer, fax and telephone equipment.

1.3.System Components

The 2406 TXRX system consists of two major groups of equipment; an above-decks group and a below-decks group.

Each group is comprised of, but is not limited to, the items listed below. All equipment comprising the Above Decks is

incorporated inside the radome assembly and is integrated into a single operational entity. For inputs, this system

requires only an unobstructed line-of-sight view to the satellite, Gyro Compass input and AC electrical power.

For more information about these components, refer to the Basic System Information section of this manual.

A. Above-Decks Equipment (ADE) Group

1. Stabilized antenna pedestal

2. Antenna Reflector

3. Feed Assembly with LNB(s)

4. Ku-Band Solid State Block Up-Converter (SSPBUC)

5. Radome Assembly

B. Below-Decks Equipment Group

1. Antenna Control Unit

2. Satellite Modem and other below decks equipment required for the desired communications purposes.

3. Other below decks LAN and VOIP equipment

4. Ethernet and telephone cables

1.4.General scope of this manual

This manual describes the Sea Tel Series 06 Antenna (also called the Above Decks Equipment), its’ operation and

installation. Refer to the manual provided with your Antenna Control Unit for its’ installation and operating

instructions.

1.5.Quick Overview of contents

The information in this manual is organized into chapters. Operation, basic system information, installation, setup,

functional testing, maintenance, specifications and drawings relating to this Antenna are all contained in this manual

2406-7 Broadband At Sea Introduction

1-2

THIS PAGE INTENTIONALLY LEFT BLANK

Tabla de contenidos

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario