SDX Audio SPOT 3 Manual de usuario

SPOT 3

User's Guide

By SDX Business Systems Limited

38GDE00001SCA - Issue 2

SPOT 3 User's Guide – iii

Getting Started................................................1

Using this Guide................................................1

What is SPOT? .................................................2

SPOT Telephone Features...............................3

SPOT Fax/Modem Features.............................4

Installing SPOT................................................5

Unpacking & Checking......................................5

Connecting SPOT to a Telephone Socket........6

Connecting SPOT to Your PC...........................7

Installing the SPOT Software............................8

Registering Your SPOT.....................................9

Using SPOT as a Normal Phone..................10

Dialling & Ringing Setup.................................10

Switching from LD to MF During a Call...........10

Making Calls....................................................11

Answering Calls ..............................................11

Switching Between Handsfree & Handset......11

Muting Calls.....................................................11

Handsfree Volume...........................................11

Working with PC Applications.....................12

General Application Notes..............................12

Windows Cardfile............................................13

Windows Terminal...........................................15

Using SPOT as an Answering Machine..........15

Appendix A: SPOT Commands...................17

Introduction.....................................................17

Hayes AT Commands.....................................18

S-Register Values...........................................19

AT Command Result Codes...........................20

ATV Commands .............................................21

SPOT Telephony Commands.........................22

Appendix B: SPOT Connectors...................24

SPOT Serial Cable.........................................24

Telephone Cable.............................................24

Appendix C: UK Statutory Requirements..25

Approval Requirements..................................25

Power requirement..........................................25

Safety requirements........................................25

Description of Port Types...............................25

Suitability for use ............................................26

Dialling modes................................................26

Ringer Equivalent Number (REN) ..................27

Dialling Recommendations.............................27

Available facilities...........................................28

Stored numbers..............................................28

Glossary of Terms........................................29

Index...............................................................30

CONTENTS

Getting Started - Page 1

SPOT 3 User's Guide

Getting Started

Using this Guide

QUICK START:

1. Go directly to page 5to install your SPOT.

2. Then go to page 8to install the SPOT software.

3. Then go to page 9to register your SPOT for 12 months free

telephone support.

We hope that this guide helps you to install and start using

your SPOT. It cannot cover all the applications with which

you can use SPOT. The example applications provided on

the SPOT software disk include their own help files to

guide you.

This chapter outlines the main features of SPOT. The other

chapters are:

–

"Installing SPOT"

This is the place to start.

–

"Using SPOT as a Normal Phone"

Making and answering normal calls, working handsfree,

changing volume, etc.

–

"Working with PC Applications"

Covers the general modem and fax settings that should

allow SPOT to work with any PC applications.

–

"SPOT Commands"

Lists all the modem and other commands that SPOT can

understand. Hopefully you won't need to use these.

–

"UK Statutory Requirements"

A section of 'stuff' we are required to give you.

Page 2

SPOT 3 User's Guide

What is SPOT?

SPOT software:

SDX supply a range of

software packages that use

the features of SPOT. Each

of these includes its own

help files.

Welcome to SPOT, the handsfree telephone that you can

control directly from your computer. With SPOT you can

dial calls automatically from your PC applications, send

and receive faxes, use voicemail and answering machine

software, and access on-line information services.

All this functionality is provided within SPOT, which

simply connects to your PC's serial port. You do not need

to dismantle your PC in any way (which might invalidate

your PC warranty).

This User's Guide explains how to install SPOT and

provides guidelines for using telephony aware packages

with SPOT.

Getting Started - Page 3

SPOT 3 User's Guide

SPOT Telephone Features

On its own, SPOT works as a standard telephone with a

range of additional features. SPOT provides you with

handsfree operation, mute and volume controls and redial.

SPOT can operate as a normal handsfree telephone

without the PC lead being connected.

Telephone Specification:

–On-hook dialling

–Handsfree speech

–Last number redial

–Handset and handsfree mute

–Time break recall (TBR)

–Ringer volume control

–Handsfree speaker volume control

–DTMF dialling

–Alpha-numeric keypad

–BABT approved

–Standard BT telephone jack plug

Page 4

SPOT 3 User's Guide

SPOT Fax/Modem Features

With your SPOT connected to your PC you have true

Computer Telephony Integration (CTI ) at the desktop.

Your SPOT can be a modem, a fax machine, an answer

phone, an autodialler; almost whatever your PC's software

requires. This is all done via a single cable between SPOT

and the PC.

Modem Specification:

–Hayes AT compatible

–1200 or 2400 bits per second

–BABT approved

–Compatible with V21, V22, V22bis

–RS232C serial lead (9 PIN D-type connec tor)

–Power from DC power supply unit (supplied)

Fax Specification:

–Group 3, Class 2 Send/Receive Fax

–Fax speed 9600bps

Voice Specification:

–Voice data at 19.2 Kbps

–Encoding/decoding: 8-bit linear

–Compression: CVSD 14.4

–Sampling rate: 7300Hz

Computer Telephony Integration (CTI) Specification:

–SPOT supports the Microsoft/Intel TAPI standard

Installing SPOT - Page 5

SPOT 3 User's Guide

Installing SPOT

Unpacking & Checking

Note:

The number of manuals and

software disks may vary

according to your SPOT

supplier.

Before starting, first check that you have received all parts

required as listed below. Then go to page 6.

SPOT includes:

–SPOT Telephone with captive serial cable

–SPOT Handset

–Phone lead

–Power supply unit with lead

–9-pin to 25-pin serial connector adapter

–Manual(s) (see note)

–Software disk(s)

You also require:

–BT jack socket

–PC with free 9-pin or 25-pin D-type serial port (see

below"PC Requirements")

–Domestic mains power socket (230V 50Hz.)

–SPOT installation normally requires no tools

PC Requirements

SPOT requires a PC with the following specification:

–Minimum: 486SX 25MHz processor and 4MB RAM.

–Recommended: 486DX 50MHz processor with 8MB RAM.

–Windows 3.1, 3.11 or Windows 95.

–A free 9-pin or 25-pin D-type serial port.

–At least 3MB of hard disk space.

Page 6- Installing SPOT

SPOT 3 User's Guide

Connecting SPOT to a Telephone Socket

SPOT plugs into a modern style telephone jack socket. If

you do not have this type of socket, contact your

telephone line provider to have a suitable socket installed.

To connect SPOT as a telephone:

1. Plug the SPOT phone lead into the

LINE

socket under the

SPOT phone.

2. Plug the SPOT handset lead into the

H/SET

socket under

the SPOT phone.

3. Use the channels in the base of the SPOT phone to route

the cables as you prefer.

4. Plug the SPOT phone lead into your telephone socket.

5. Plug the SPOT power supply unit into a mains supply

socket and switch on.

6. Plug the power supply cable into the socket under the

SPOT phone.

7. Test the connection by making a normal phone call. If

this does not work check the cable connections first. If

the cables are okay, switch the SPOT from MF (tone)

dialling to LD (pulse) dialling (see page 10). If it still does

not work, try making a call with another phone in the

same socket.

8. Go to "Connecting SPOT to Your PC" on page 7.

Phone Ringing Problems

Every piece of telephone equipment has a REN value. The

total REN of the all the equipment connected to a line must

not exceed 4 to guarantee proper ringing and operation.

When the SPOT power supply unit is connected and on,

SPOT has a REN of 1.5.

Tabla de contenidos

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario