Scion-Tech SC08.CTL200 Manual de usuario
SC08.CTL200
HDMI over IP
Network Controller
User Manual
Version 1.1
Scion Tech Limited
Thatcham, Berkshire, United Kingdom
Www.scion-tech.co.uk
Page 1
User ManualSC08.CTL200Scion Tech
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating
or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, elec-
tric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect
and extend the life of your equipment.
Table of Contents
1. Introduction….……………………………………………….…….……………………………………….….….…………………
2. Features…………………………………………….……….…………….…………….….…..….…..…………….….……………..
3. Specifications……………………………………………………………………….……….………………………………………..
4. Panel Description………………………………….………………………….……………….………….……….….…..………..
5. Connection Diagram……….…………………….……………………………………..…..…..….…..……….….…..….……..
6. Preparing your PC………………………………………………………….………….…….……….……………….……………
7. Web Browser Login…..…………………………….….….……………………………………………………………………….
8. Searching for Network Devices…...….……..….…..….….…..…..…..…..….…..…..….….….….….….….….…………..
9. Genlock and Seamless Switching…..…...…..…..…..…...…..…..…..….…..….…...…..….…..…..….……………………
10. Encoder (Transmitter) Settings..……….………………………….…..…….….…………….…….……………………..
11. Decoder (Receiver) Settings……………………………….………………….……….…….….……………………………
12. Creating Zones.….………………….…………….………………….….…..……….………………….…………….…………..
13. Zone Preset - Matrix Switching.………………….………….…….…………….………….………….…………………..
14. Zone Presets - Video Walls..…..…..….….….….…..…….….…..….……..…..….…..….…...….….……………………..
15. Zone Presets - Multiviewer…..…….….…..…..…..….…...….……..….….…..….….….….….…………..……………….
16. EDID Management…….….….…….….….….…...…..…..….….…….…….…….….…….……….…….….….…….……….
17. Serial RS232 Settings and Parameters (ALL)………………….……………….……………………………………..
18. Serial RS232 Settings and Parameters (Individual)….…………..……….…………….………………………….
19. Infra-Red Settings.……………….…….………………….……………….…………….…………….……….….…………….
20. USB Settings….……………………………………………………………….………….……………….……….………….…….
21. Server Settings.….…………….…….…………………………….….…………………………………….……………………..
22. Maintenance and Warranty……………………………………………………………………….………………………….
3
3
3
3
4
5
6
8
8
9
9
10
11
12
13
14
15
16
17
18
19
20
Page 2
User ManualSC08.CTL200Scion Tech
1 Introduction
The SC08.MX11 is designed to be used with Scion SC08.MX series HDMI over IP switching products. It
provides easy access to setup and control the network transmitters and receivers.
2 Features
●1.2GHz Quad-Core ARM Cortex-A53 CPU
●Linux based OS
●Web Browser GUI for easy access, setup and control
●10/100M Ethernet port for TCP/IP Control
●RS232 Port for API Control
●4 x USB 2.0 Host Ports (Reserved)
3 Specifications
Technical
Control Ports
1 x RS232 (Phoenix Block)
1 x Ethernet Port (RJ45 Socket)
4 x USB (Type A) Ports Reserved
ESD Protection Human Body Model | +/-8kV (air gap discharge) and +/-4kV
(contact discharge)
Housing Metal Enclosure
Colour Black
Dimensions (W) 100 x (D) 130 x (H) 26mm
Weight 370g
Power Supply Input: AC 100 ~ 240V 50/60Hz, Output DC 12V/1A
Power Consumption 4 watt
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
Relative Humidity 20 to 90% RH (no condensation)
4 Panel Description
CAT5e/6
TX GND RX
USB USB RS232 DC 12V
Power Reset
123 4 5 6 7
1. Power LED
2. Reset Button - Pressing for 3 seconds will reset to factory defaults including IP 169.254.23.100
3. LAN Port RJ45 - Ethernet 10/100
4. USB Port Type A - Reserved for future design
5. USB Port Type A - Reserved for future design
6. RS232 Terminal - System setup and control. Contact Scion for details API document
7. Power input 12V/1A
Page 3
User ManualSC08.CTL200Scion Tech
5 Connection Diagram
Page 4
Fig 2
User ManualSC08.CTL200Scion Tech
Page 5
6 Preparing your PC
Step 1: Connect the SC08.MX11 controller, computer, transmitters and receivers to the Ethernet switch as
shown in Fig 2.
Step 2: On your PC, go to Control Panel > Network and Internet > Network Connections > Local Area
Connections, right click on it and choose Properties.
Double click Internet Protocol Version 4 (TCP/Ipv4)
Choose “Use the following IP address”, for example 169.254.23.30 as your PC IP address, 255.255.255.0 as
the subnet mask, then click “OK”. Do not use the default IP address of the controller.
User ManualSC08.CTL200Scion Tech
Page 6
Choose “Use the following IP address”, for example 169.254.23.30 as your PC IP address, 255.255.255.0 as
the subnet mask, then click “OK”. Do not use the default IP address of the controller.
User ManualSC08.CTL200Scion Tech
Page 7
7 Web Browser Login
The IP address of your PC, controller and other products on the LAN should be in the same network seg-
ment. As the controllers IP address is 169.254.23.100, the computers IP address should be set to
169.254.23.XX, whereas “XX” can be a number between 1 ~ 255, accept 100.
Open your computers Web Browser and type the controllers IP address in the browsers address bar.
When you first enter the Web GUI you will need to enter the login and password, use “admin” for both.
Then select the HDMI encoder/decoder product you will be controlling. Now proceed with login.
Network AV
User
Password
Products
Sign In
SC08.MX16/21 Encoder/Decoder
SC08.MX2000 Encoder/Decoder
SC08.MX3000 Encoder/Decoder
SC08.MX5000 Encoder/Decoder
admin
admin
User ManualSC08.CTL200Scion Tech
TV 1
169.254.20.21
3.5.2.3
BBC 1
169.254.20.175
3.5.2.3
8 Devices
To view all the devices on your network, click “Search” to start searching. The encoders (transmitters) will
appear in green and the decoders (receivers in blue.
The device IP address and version are displayed in the boxed area. More detailed information will be dis-
played if you click on the link icon in the bottom right corner of each box,
Video over IP Controller admin
Log Out
Encoders
BBC 1
169.254.20.175
3.5.2.3
BBC 2
169.254.20.176
3.5.2.3
ITV 1
169.254.20.177
3.5.2.3
CH4
169.254.20.178
3.5.2.3
Decoders
TV 1
169.254.20.21
3.5.2.3
TV 2
169.254.20.22
3.5.2.3
TV 3
169.254.20.23
3.5.2.3
TV 4
169.254.20.24
3.5.2.3
Devices Search Genlock Seamless
9 Genlock and Seamless
●When Genlock is selected the receivers video output will be synced to the transmitters input. In this
mode the video will be presented with zero frame rate loss.
●When Seamless is selected the video will be buffered in order for the receiver to switch between in-
puts without dropping video or showing a black screen. The buffering may cause visual delay from
the original source.
Page 8
Devices Zones EDID Serial IR USB Server Update
User ManualSC08.CTL200Scion Tech
Page 9
10. Encoder (Transmitter) Settings
●L/R In & Out: You can set the devices physical interface to analogue audio input or output.
●HDMI Audio Source: Allows you to select either the native HDMI audio signal or the embedded au-
dio input.
●IP Settings: Select DHCP ON or insert your own static IP address and subnet mask.
11. Decoder (Receiver) Settings
●L/R Out: You can set the the receivers audio to output the native HDMI audio or embedded audio.
●HDMI Audio Source: Select the HDMI audio from selected transmitter or another transmitters HD-
MI audio.
●Video Format: Set the video output resolution. In seamless mode the resolutions must be the same.
Encoder
Alias Name: BBC 1
Host Name: DEC4K02-D88039E73AEA
MAC Address: d88039e73aea
FW Version:
Group IP:
Video Resolution:
HDCP Version:
Frame Rat/2:
Start Video:
3.5.2.3
224.1.1.5
1280x720 60Hz YBCR_444 8bit
HDCP 2.2
Decoder
Alias Name: TV 1
Host Name: DEC4K02-D88039E73D6F
MAC Address: d88039e73d6f
IP Address:
FW Version:
Group IP:
Video Resolution:
HDCP Version:
169.254.20.21
3.5.2.3
224.1.1.7
1920x1080 30Hz RGB 8bit
HDCP 2.2
L/R In & Out: L/R In
HDMI Audio: HDMI
IP Settings
IP Address: 169.254.20.175
DHCP:
Subnet Mask: 169.254.20.175
Gateway: 0.0.0.0
Reset Device:
Reboot Device:
Show Me:
Apply
Apply
Apply
Save Cancel
L/R In & Out: TX L/R In
HDMI Audio: HDMI Local Audio
Display Mode: Seamless
IP Settings
IP Address: 169.254.20.175
DHCP:
Subnet Mask: 169.254.20.175
Gateway: 0.0.0.0
Reset Device:
Reboot Device:
Show Me:
Apply
Apply
Apply
Save Cancel
User ManualSC08.CTL200Scion Tech
Page 10
12. Zones
Up to 16 zones can be created, each having individual editable alias names. The name can have up to 64
characters (without spaces).
Click the small icon at the top left corner of the dialogue box to select the transmitters/decoders you would
like to add to your zone. Receivers must be selected before you can create your zones in this next section.
Network AV
Selected
DEC 1 DEC 2
Options
DEC 1 DEC 2 DEC 3
Video over IP Controller admin
Log Out
Zone 2
Creator: admin
Time: 2019-04-09 11:05:51
Zone 3
Creator: admin
Time: 2019-04-09 11:06:25
Zone 4
Creator: admin
Time: 2019-04-09 11:06:30
Zone 5
Creator: admin
Time: 2019-04-09 11:06:58
Zone 6
Creator: admin
Time: 2019-04-09 11:07:07
Zone 7
Creator: admin
Time: 2019-04-09 11:07:30
Zone 8
Creator: admin
Time: 2019-04-09 11:07:58
Zone 9
Creator: admin
Time: 2019-04-09 11:08:17 +
Devices Zones EDID Serial IR USB Server Update
User ManualSC08.CTL200Scion Tech
Tabla de contenidos
Otros manuales de Controladores de Scion-Tech
