Schwinn 9-7300 Guía de referencia

Technical Procedure

Page 1

637-8642 Rev. A

Latest Rev.

Service Manual

Links

Generator Belt Replacement

Applies to: AC Power (9-7300)

Required Tools:

• #2 Phillips Screwdriver

• 9/16” Socket

• 10mm Deep Socket

1. Use a #2 phillips screwdriver to remove the screw securing

the right side ywheel cap to the bike, then remove the

cap.

2. Use a #2 phillips screwdriver to remove the screws securing

the left generator cover to the bike

3. With the left generator cover removed, use a screwdriver to

remove the screw hidden by the generator board, angled

as shown.

Technical Procedure

Page 2

637-8642 Rev. A

4. Use a #2 phillips screwdriver to remove the screws securing

the outer chain guard to the bike

5. Remove the outer chain guard.

TECH TIP: Slowly rotate the user right side crank arm toward

the rear of the bike to help with removal of the outer chain

guard.

6. Use a 9/16” socket to remove the axle nuts on both sides of

the ywheel.

Technical Procedure

Page 3

637-8642 Rev. A

7. Remove the tension bolt covers from the front of the bike

8. Using a 10mm deep socket, remove the left and right-side

tension screws from the front forks of the bike.

TECH TIP: If an accessory (such as the Body Bar Holster) is lim-

iting access to the tensioning nuts, use a 6mm allen key with a

10mm deep socket on the end of it to work within the clearance

available.

9. Carefully move the ywheel toward the rear of the bike and

down to drop the ywheel free from the frame.

10. Once the ywheel is free from the bike, install the new gen-

erator belt/band onto the left side ywheel pulley.

11. Reinstall the ywheel

Technical Procedure

Page 4

637-8642 Rev. A

12. Loop the free end of the belt/band over the generator

pulley.

TECH TIP: If the generator band slips o of the ywheel pulley,

remove the nger guards with a #2 phillips screwdriver - it

makes placing the belt/band into the pulley groove much

easier.

13. After replacing the belt/band the carbon blue belt (main

drive belt) will need to be tensioned.

14. Use a 10mm deep socket to tension/loosen the left and

right tension nuts by turning clockwise to tighten and

counter-clockwise to loosen. Be sure to adjust the bolts

evenly so that the ywheel is not angled between the forks.

Using a Hz-detecting app, pluck the belt and measure the

Hz. A properly tensioned belt should measure at ~100

Hz.

TECH TIP: If an accessory (such as the Body Bar Holster) is lim-

iting access to the tensioning nuts, use a 6mm allen key with a

10mm deep socket on the end of it to work within the clearance

available.

15. Lower the brake down and ensure that none of the brake

magnets are touching the ywheel.

16. Once the belt has been tensioned so that the correct Hz is

measured and the ywheel has been checked for align-

ment then tighten the axle bolts that were loosened in Step

NOTE: Part of the frame has been moved for clarity

Brake Magnets

Flywheel

Tabla de contenidos

Otros manuales de Equipo de fitness de Schwinn

Schwinn

Schwinn AD6 Manual de usuario

Schwinn

Schwinn 9-7310 Manual de usuario

Schwinn

Schwinn 230 Recumbent Bike Manual de usuario

Schwinn

Schwinn 590U Manual de usuario

Schwinn

Schwinn SCHWINN AC PERFORMANCE FULL ASSY Guía de inicio rápido

Schwinn

Schwinn A.C. Performance Manual de usuario

Schwinn

Schwinn Active series 20 series Manual de usuario

Schwinn

Schwinn 590R Manual de usuario

Schwinn

Schwinn AirDyne Pro Manual de usuario

Schwinn

Schwinn AD6 Manual de usuario

Schwinn

Schwinn Star Trac 4iiii Manual de usuario

Schwinn

Schwinn AD6 Manual de usuario

Schwinn

Schwinn AD6 Manual de usuario

Schwinn

Schwinn IC3 Manual de usuario

Schwinn

Schwinn IC Pro Manual de usuario

Schwinn

Schwinn 410 i Manual de usuario

Schwinn

Schwinn 4iiii Manual de usuario

Schwinn

Schwinn Cadence Pro Manual de usuario

Schwinn

Schwinn SCHWIN COMP Manual de usuario

Schwinn

Schwinn 411 Manual de instrucciones

Schwinn

Schwinn Triple Link-SDL Guía de configuración

Schwinn

Schwinn AD6 Manual de usuario

Schwinn

Schwinn 490e Manual de usuario

Schwinn

Schwinn MPower Echelon2 Power Upgrade Manual de usuario

Manuales populares de Equipo de fitness de otras marcas

NSD

NSD PB-188P Manual de usuario

Performance

Performance HyperVibe Manual de usuario

Scalamobil

Scalamobil S27 Manual de usuario

Precor

Precor Experience Series Manual de usuario

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manual de usuario

Taurus

Taurus TF-RK1312 Manual de usuario

Nustep

Nustep T5 Manual de usuario

Precor

Precor CW-507 Manual de usuario

Movement

Movement BICEPS Idea Manual de usuario

Kegel8

Kegel8 V For Men Manual de usuario

Skandika

Skandika Styrke II Manual de usuario

BLK BOX

BLK BOX 21-0122-0B Manual de usuario

Stamina

Stamina aeropilates premier 299 Manual de usuario

SPORTSTECH

SPORTSTECH PBX300 Manual de usuario

ParaBody

ParaBody Serious Steel 877102 Manual de usuario

Weslo

Weslo Gym 650 Manual de usuario

Rebel

Rebel ACTIVE RBA-1011 Manual de usuario

4iiii

4iiii FLiiiight Manual de usuario