Schwarze Industries Hypervac Manual de usuario

Product Manual

HYPERVAC

Schwarze Industries, Inc.

Quality Performance

Public Safety

Value

Customer Support

Product Manual

Schwarze Industries, Inc.

Schwarze Industries, 1055 Jordan Road, Huntsville, AL 35811 USA

HYPERVAC

Foreword

4 SCHWARZE HYPERVAC HV-18 revised 11/18

Dear customer,

We are pleased to have you as a Schwarze customer. Your new sweeper has been carefully designed to give maximum

service with minimum downtime.

This manual is provided to give you the necessary operating and maintenance instructions for keeping your sweeper in

top operating condition. Careful use and timely service save extensive repairs and costly downtime losses. Make sure to

read this manual thoroughly and understand what each control is for and how to use it.

Safety is of primary importance to the owner/operator and the manufacturer. Observe all safety precautions decals on

the machine and noted throughout the manual for safe operation. If any assistance or additional information is needed,

contact your authorized Schwarze dealer.

In addition to having many Authorized Dealers located throughout the country, Schwarze Industries also maintains a fully

stocked factory service center in Huntsville, Alabama. In the event you need parts or service, call your nearest Authorized

Dealer. Their name and number can be found on the Sweeper Information Sheet, located in the front of this manual.

In the unlikely event that your local dealer is unable to provide the assistance you require, call us at our home ofce in

Huntsville, Alabama. We have a state-of-the-art fabrication and production facility and a complete service and refurbishing

center with an inventory of over $500,000 in spare parts. In most cases, same day shipping and overnight delivery are

available.

Schwarze dealer locator: http://www.schwarze.com/locator

Schwarze website: http://www.schwarze.com

Schwarze Customer Service: 1.800.879.7934

Table of Contents

HV-18 revised 11/18 SCHWARZE HYPERVAC 5

In This Manual

Foreword ........................................................................4

1 Safety .............................................................................9

1.14 Safety Decals Locations........................................................23

Power Module (Air & Vacuum Sweepers Only) .......................................23

Hopper Locations..............................................................25

Side Broom Locations ..........................................................27

Main Broom Locations (Mechanical Sweepers Only) ..................................27

Conveyer Locations, Both Sides (Mechanical Sweepers Only)...........................28

Truck Locations ...............................................................28

2 Technical Data .....................................................................31

3 Pre-Operation......................................................................33

Pre-Operation Inspection........................................................34

How your Schwarze Hypervac sweeper works ..........................................36

Sweeping techniques with vacuum sweepers .......................................36

Dust control techniques ........................................................36

4 Operations ........................................................................37

4.1 Parts Identification .............................................................38

4.2 Camera System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4.3 The Sweeping Control Console ...................................................39

Console Features .............................................................39

Display Module - Main Screen Identification .........................................40

Top Switch Bank Identification....................................................41

Gutter Broom Switch Bank ......................................................42

Detachable Switch Bank 1.......................................................43

Detachable Switch Bank 2.......................................................44

Positioning The Control Console ..................................................45

Sweeper Unit Gauges ..........................................................46

Engine Oil Pressure (key 5)......................................................46

Main Screen Alarms............................................................47

Sweep/Standby Operation.......................................................48

4.4 Standard Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

4.5 Manual Operation..............................................................50

Front Spray Bar Button .........................................................50

Low Pressure Water ...........................................................50

Rear Beacon Light Switch .......................................................50

Auxiliary Engine Speed Controls ..................................................51

Motor Speed Control Button .....................................................51

Pitch Control Button............................................................51

Dust Stripper .................................................................52

Foreword

6 SCHWARZE HYPERVAC HV-18 revised 11/18

Leaf Pickup Button.............................................................52

Gutter Broom Raise/Lower ......................................................52

Gutter Broom Tilt/Pitch..........................................................53

Left/Right Tilt .................................................................53

Forward/Backward Tilt (pitch) ....................................................53

Gutter Broom Extension Override .................................................54

Broom to Pavement Contact switches (Down Pressure)................................54

4.6 Hopper Operation..............................................................55

Hopper Dumping ..............................................................55

Hopper Shaker Button ..........................................................55

Hopper Door .................................................................56

4.7 Maintenance Key Code Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Accessing ...................................................................56

Maintenance Key Code Screen...................................................56

Resetting Equipment Hour Meters.................................................57

The Engine Trouble Codes screen ................................................57

Emission Control Catalyst Cleaning (Regen) , Engine Fault Codes and Other Engine Data ....58

Cleaning the Catalyst...........................................................59

Catalyst Condition / Soot Levels ..................................................59

4.8 Additional Optional Equipment ....................................................60

Hand Hose (if equipped) ........................................................60

Hopper Deluge (if equipped) .....................................................61

High Pressure Washdown (if equipped) ............................................62

Magnet Bar (if equipped) ........................................................62

Self-Dumping Magnet (if equipped)................................................62

Driver Position (if equipped) .....................................................62

Arrow Board Control Panel (if equipped)............................................63

Drop Down Screen (if equipped) ..................................................63

4.9 End of Shift Cleanup and Maintenance .............................................63

5 Troubleshooting ...................................................................65

5.1 Troubleshooting the Sweeping System .............................................66

5.2 Troubleshooting the Auxiliary Engine ...............................................67

5.3 Troubleshooting the Water System ................................................67

5.4 Troubleshooting the Hydraulic System..............................................68

5.5 Troubleshooting the Side Brooms .................................................69

5.6 Troubleshooting the Camera System...............................................70

5.7 Troubleshooting the Automatic Shutdown System.....................................70

6 Service ...........................................................................71

6.1 Oil Levels and Lubrication .......................................................72

Auxiliary Engine Oil ............................................................72

Auxiliary Engine Cooling System..................................................72

Table of Contents

HV-18 revised 11/18 SCHWARZE HYPERVAC 7

Hydraulic System..............................................................72

Lubrication Schedule ...........................................................72

Fan Shaft Bearing Lubrication ....................................................72

6.2 Pickup Nozzle.................................................................73

Replacing the Nozzle Flaps & Skirt ................................................73

Adjusting the Nozzle flaps (nozzle skirt) ............................................73

Nozzle Tilt Adjustment .........................................................74

Replacing the Nozzle Hose ......................................................74

6.3 Hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Replacing the Hopper Seals .....................................................74

Replacing the Hopper ..........................................................74

6.4 Side Broom(s) ................................................................75

Adjusting the Side Broom Extension Spring .........................................75

Replacing the Side Broom Motor..................................................77

Replacing the Side Broom Bristles ................................................78

6.5 Center Broom.................................................................78

Pitch Adjustment (Left, Right, Center) .............................................78

Replacing the Center Broom Bristles...............................................79

6.6 Power Module ................................................................79

Replacing the Engine Stub Shaft..................................................79

Adjusting the Drive Belt Tension ..................................................80

Replacing the Drive Belt ........................................................81

Inspecting the Sweeping Fan System ..............................................81

Replacing the Fan System Fan ..................................................82

Replacing the Fan House Liner ..................................................83

Replacing the Fan Guard........................................................84

1.Remove the hardware retaining the Fan guard located on the top and side of the guard to obtain

excess the Hydraulic pump and Fan Drive belts. ....................................84

Replacing the Fan Shaft Bearing..................................................84

Hydraulic System Service Schedule ...............................................84

Hydraulic Tank ................................................................85

Replacing the Hydraulic Pump Drive Belt ...........................................86

Adjusting the Hydraulic System Pressure ...........................................86

Checking the Solenoid Control Valve ..............................................87

Refilling the Water Tank.........................................................87

Cleaning the Water Manifold Solenoid .............................................88

Cleaning/Replacing the ‘Y’ Strainer ................................................88

Water Pump Pressure Check ....................................................89

Water Nozzle Cleaning/Replacement ..............................................89

6.7 Dust Suppression System .......................................................89

Dust Suppression System Winterizing..............................................90

Foreword

8 SCHWARZE HYPERVAC HV-18 revised 11/18

6.8 Electrical System ..............................................................91

System Locker Identification .....................................................91

SK-2428 - FUSE BLOCK LABELS....................................................92

SK-2428 - CPU POWER WIRING ....................................................93

SK-2428 - #1 WATER TRAY CPU BOX WIRING.........................................94

SK-2428 - #2 MAIN HARNESS CPU BOX WIRING ......................................95

SK-2428 - #3 HYD TANK MANIFOLD CPU BOX WIRING .................................96

SK-2428 - #3A AIR MANIFOLD CPU BOX WIRING ......................................97

SK-2428 - #4 CONSOLE CPU BOX WIRING ...........................................98

SK-2428 - #6 FUSED POWER CONNECTOR CPU BOX..................................99

SK-2428 - CIRCULAR JUNCTION CONNECTOR ......................................100

SK-2428 - FUSE BLOCK ..........................................................101

SK-2428 - CPU CONNECTOR .....................................................102

SK-2428 - DIODE & RESISTOR CAP ................................................103

SK-2437 - AIR SCHEMATIC .......................................................104

SK-2434 - HYDRAULICS..........................................................107

SK-2459 - SPARY WATER SYSTEM.................................................108

Spare Parts List .................................................................109

HV-18 revised 11/18 SCHWARZE HYPERVAC 9

Section 1 - Safety 1

In this Section

General Safety Instructions and Practices

Personal Protection Equipment - PPE

Operator Safety and Hazards

Maintenance Safety and Hazards

Federal Laws & Regulations

Safety Decals Locations

Section 1 - Safety

10 SCHWARZE HYPERVAC HV-18 revised 11/18

SAFETY

Sweeper Safety 07/18 Safety Section 1-2

SAFETY

GENERAL SAFETY INSTRUCTIONS AND PRACTICES

A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to

the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings,

and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if

followed, will help protect the operator and bystanders from injury or death. Read and understand these

Safety Messages before assembling, operating or servicing this Implement. This equipment should only be

operated by those persons who have read the manual, who are responsible and trained, and who know how

to do so responsibly.

The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this

manual and on decals which are attached to the equipment. The Safety Alert Symbol means:

“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal Word

are intended to warn the owner/operator of impending hazards and the degree of possible injury

faced when operating this equipment.

Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR

VERY SERIOUS INJURY.

Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH

OR SERIOUS INJURY.

Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR

INJURY.

Identifies special instructions or procedures that, if not strictly observed, could result in

damage to, or destruction of the machine, attachments or the environment.

NOTE: Identifies points of particular interest for more efficient and convenient operation or repair.

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or

death may occur unless care is taken to follow the warnings and instructions stated in this

Manual and in the Safety Messages on the implement. Always follow the instruction in this

manual and use good common sense to avoid hazards.

Pictographs are used throughout this manual to help bring your visual attention to safety issues.

NOTE: If you want a translation of this safety section in one of the following Languages, please contact:

Translations at 1502 E. Walnut Street Seguin, TX 78155; Fax: (830) 372-9529; Safety Section Translations

are available in Spanish, Portuguese, French, German, Russian. SW-GS-01

Practice all usual and customary safe working precautions and above all---

remember safety is up to YOU. Only YOU can prevent serious injury or death

from unsafe practices.

Tabla de contenidos

Otros manuales de Soplador de Schwarze Industries

Schwarze Industries

Schwarze Industries A9 MONSOON SE Manual de usuario

Manuales populares de Soplador de otras marcas

Weed Eater

Weed Eater VS2000BV Manual de usuario

KRAUSMANN

KRAUSMANN U37020-00 Manual de usuario

Bosch

Bosch ALB 36 LI Manual de usuario

Cub Cadet

Cub Cadet HB425 Manual de usuario

GreenWorks Pro

GreenWorks Pro BLB482 Manual de usuario

ARIETE

ARIETE 2768 Manual de usuario

NuTone

NuTone 331H Manual de usuario

GÜDE

GÜDE GLB 200 18 Li-Ion Manual de usuario

I.VA.CO.

I.VA.CO. SC Series Instrucciones de funcionamiento

DeWalt

DeWalt DCE100 Manual de usuario

Becker

Becker SV 7.330 Manual de usuario

Metabo

Metabo AG 18 Pro Manual de usuario

Desa

Desa GA3650TB Manual de usuario

Echo

Echo Power Blower PB-230LN Manual de usuario

Echo

Echo PB-413H Manual de usuario

Black & Decker

Black & Decker BV3100 Manual de usuario

Ryobi

Ryobi RY08570 Manual de usuario

Haaga

Haaga 355 Manual de usuario