SCHUNK AGE-Z Series Instrucciones de uso
Translation of the original manual
Assembly and Operating Manual
AGE-Z
Compensation Unit in Z-direction
Imprint
2
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
Imprint
Copyright:
This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights
reserved. Any reproduction, processing, distribution (making available to third parties),
translation or other usage - even excerpts - of the manual is especially prohibited and
requires our written approval.
Technical changes:
We reserve the right to make alterations for the purpose of technical improvement.
Document number: 389009
Version: 02.00|28/05/2019|en
© SCHUNK GmbH & Co. KG
All rights reserved.
Dear Customer,
thank you for trusting our products and our family-owned company, the leading
technology supplier of robots and production machines.
Our team is always available to answer any questions on this product and other solutions.
Ask us questions and challenge us. We will find a solution!
Best regards,
Your SCHUNK team
SCHUNK GmbH & Co. KG
Spann- und Greiftechnik
Bahnhofstr. 106 – 134
D-74348 Lauffen/Neckar
Tel. +49-7133-103-0
Fax +49-7133-103-2399
schunk.com
Table of contents
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
3
Table of contents
1 General.................................................................................................................... 5
1.1 About this manual ................................................................................................ 5
1.1.1 Presentation of Warning Labels ...............................................................5
1.1.2 Definition of Terms...................................................................................6
1.1.3 Applicable documents ..............................................................................6
1.2 Warranty .............................................................................................................. 6
1.3 Scope of delivery .................................................................................................. 6
1.4 Accessories ........................................................................................................... 6
1.4.1 Accessories pack.......................................................................................6
1.4.2 Sealing kit .................................................................................................7
1.4.3 Sensors .....................................................................................................7
2 Basic safety notes ................................................................................................... 8
2.1 Intended use......................................................................................................... 8
2.2 Not intended use.................................................................................................. 8
2.3 Constructional changes ........................................................................................ 8
2.4 Spare parts ........................................................................................................... 8
2.5 Ambient conditions and operating conditions .....................................................9
2.6 Personnel qualification......................................................................................... 9
2.7 Personal protective equipment.......................................................................... 10
2.8 Notes on safe operation.....................................................................................10
2.9 Malfunctions....................................................................................................... 11
2.10 Disposal .............................................................................................................. 11
2.11 Fundamental dangers......................................................................................... 11
2.11.1 Protection during handling and assembly ..............................................12
2.11.2 Protection during commissioning and operation ...................................12
3 Technical Data ........................................................................................................13
4 Assembly and installation .......................................................................................14
4.1 Assembly example.............................................................................................. 15
4.2 Mechanical connection ...................................................................................... 16
4.3 Pneumatic connection........................................................................................ 18
4.4 Installing the sensors.......................................................................................... 19
4.4.1 Installing the MMS 22 magnetic switch..................................................19
5 Troubleshooting .....................................................................................................21
6 Maintenance ..........................................................................................................22
6.1 Maintenance and lubrication intervals............................................................... 22
6.2 Lubrication.......................................................................................................... 22
6.3 Disassembling the product ................................................................................. 22
6.4 Servicing and assembling the product................................................................23
Table of contents
4
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
7 Assembly drawing...................................................................................................24
8 Translation of original declaration of incorporation ................................................25
9 Annex to Declaration of Incorporation....................................................................26
General
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
5
1 General
1.1 About this manual
This manual contains important information for a safe and
appropriate use of the product.
This manual is an integral part of the product and must be kept
accessible for the personnel at all times.
Before starting work, the personnel must have read and
understood this operating manual. Prerequisite for safe working is
the observance of all safety instructions in this manual.
Illustrations in this manual are provided for basic understanding
and may differ from the actual product design.
In addition to these instructions, the documents listed under
Applicable documents [}6] are applicable.
1.1.1 Presentation of Warning Labels
To make risks clear, the following signal words and symbols are
used for safety notes.
DANGER
Danger for persons!
Non-observance will inevitably cause irreversible injury or death.
WARNING
Dangers for persons!
Non-observance can lead to irreversible injury and even death.
CAUTION
Dangers for persons!
Non-observance can cause minor injuries.
NOTICE
Material damage!
Information about avoiding material damage.
General
6
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
1.1.2 Definition of Terms
The term "product" replaces the product name on the title page in
this manual.
1.1.3 Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
1.3 Scope of delivery
The scope of delivery includes
• Compensation Unit in Z-direction AGE-Z in the version ordered
• Assembly and Operating Manual
• Accessory pack
1.4 Accessories
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
1.4.1 Accessories pack
Content of the accessory pack:
Type Designation ID number
AGE-Z 50 Cylindrical pin DIN 6325 9682023
AGE-Z 63 Cylindrical pin DIN 6325 9682023
AGE-Z 80 Cylindrical pin DIN 6325 9682089
General
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
7
1.4.2 Sealing kit
ID.-No. of the seal kit
Seal kit for ID number
AGE-Z 50 5515771
AGE-Z 63 5515770
AGE-Z 80 5515772
Contents of the sealing kit, Assembly drawing [}24].
1.4.3 Sensors
Overview of the compatible sensors
Designation Type
Magnetic switch MMS
• Exact type designation of the compatible sensors see catalog.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
Basic safety notes
8
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
2 Basic safety notes
2.1 Intended use
The product is designed for the mechanical adjustment and saving
of a positioning point for workpieces and other devices .
• The product may only be used within the scope of its technical
data, Technical Data [}13].
• When implementing and operating components in safety-
related parts of the control systems, the basic safety principles
in accordance with DIN EN ISO 13849-2 apply. The proven safety
principles in accordance with DIN EN ISO 13849-2 also apply to
categories 1, 2, 3 and 4.
• The product is intended for installation in a machine/system.
The applicable guidelines must be observed and complied with.
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Not intended use
• Any utilization that exceeds or differs from the appropriate use
is regarded as misuse.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
2.4 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
Basic safety notes
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
9
2.5 Ambient conditions and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is used only in the context of its
defined application parameters, Technical Data [}13].
2.6 Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
• All work may only be performed by qualified personnel.
• Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
• Observe the national safety regulations and rules and general
safety instructions.
The following personal qualifications are necessary for the various
activities related to the product:
Trained electrician Due to their technical training, knowledge and experience, trained
electricians are able to work on electrical systems, recognize and
avoid possible dangers and know the relevant standards and
regulations.
Qualified personnel Due to its technical training, knowledge and experience, qualified
personnel is able to perform the delegated tasks, recognize and
avoid possible dangers and knows the relevant standards and
regulations.
Instructed person Instructed persons were instructed by the operator about the
delegated tasks and possible dangers due to improper behaviour.
Service personnel of
the manufacturer
Due to its technical training, knowledge and experience, service
personnel of the manufacturer is able to perform the delegated
tasks and to recognize and avoid possible dangers.
Basic safety notes
10
02.00 | AGE-Z | Assembly and Operating Manual | en | 389009
2.7 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
• When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
• Observe the valid safety and accident prevention regulations.
• Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
• Wear heat-resistant protective gloves when handling hot
surfaces.
• Wear protective gloves and safety goggles when handling
hazardous substances.
• Wear close-fitting protective clothing and also wear long hair in
a hairnet when dealing with moving components.
2.8 Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Avoid any manner of working that may interfere with the
function and operational safety of the product.
• Use the product as intended.
• Observe the safety notes and assembly instructions.
• Do not expose the product to any corrosive media. This does
not apply to products that are designed for special
environments.
• Eliminate any malfunction immediately.
• Observe the care and maintenance instructions.
• Observe the current safety, accident prevention and
environmental protection regulations regarding the product's
application field.
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Robótica de SCHUNK
SCHUNK
SCHUNK EMH Series Instrucciones de uso
SCHUNK
SCHUNK MWS 20 Instrucciones de uso
SCHUNK
SCHUNK SWS-001 Instrucciones de uso
SCHUNK
SCHUNK FDB-AC Series Instrucciones de uso
SCHUNK
SCHUNK EGH Instrucciones de uso
SCHUNK
SCHUNK GSM-P Instrucciones de uso
SCHUNK
SCHUNK AGE-S-XYZ Instrucciones de uso
SCHUNK
SCHUNK SVH Instrucciones de uso
Manuales populares de Robótica de otras marcas
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manual de usuario
SunFounder
SunFounder PiDog Manual de usuario
Universal Robots
Universal Robots UR5 Manual de usuario
Universal Robots
Universal Robots E Series Manual de usuario
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manual de usuario
EFORT
EFORT ECR5 Manual de instrucciones
