Schmidt RM Series Manual de usuario

Thickness Gauge

RM Series

Model RMU-30

RMU-50

RMU-75

RMP-30

Edition RM 01.0.E

Instruction Manual

Valid as of: 05.07.2012• Please keep the manual for future reference!

1 Preparation

Before using the thickness gauge, check the cleanliness of the measuring surface and the

measuring pin. If necessary, clean with a dry, lint-free cloth.

2 Setup

The measuring pin with the upper measuring insert is pressed onto the lower measuring

insert and held in this position or locked with the locking screw.

By pressing the key „OFF / ON“, the measuring instrument is switched on and with the key

„0“ the zero point is adjusted.

With the function key „mm / inch“ you can select the desired scaling.

3 Measuring

The thickness gauge is ergonomically designed and allows a precise and fast measuring

with one hand.

The entire measuring range is available because the movable measuring pin is constantly

guided by spring force in the upper position.

During the measuring process, the material to be measured is scanned by the measuring

inserts.

By means of a finger, the measuring pin is carefully pressed onto the test material and the

measured value is determined.

The function key „0“ allows to set the zero point at any point in the measurement

range. This allows very fast measurements to deviations from given

Tolerances etc. are performed.

The thickness gauge can be switched of by pressing the ON / OFF key.

S C H M I D T

c o n t r o l i n s t r u m e n t s

4 Notes to maintenance

The thickness gauge should be kept dry all the time. Water and other liquids should be kept

away as they endanger the electronics.

The device should not be cleaned with acetone.

Battery replacement is carried out as follows:

1. Open battery compartment in direction of the arrow, remove the lid

2. Replace the old battery, altough paying attention to the correct position of the poles.

Insert the new battery.

3. Insert the battery cover and push toward.

5 Specifications

Measuring Range 0 - 30 mm, 0 - 50 mm, 0 - 75 mm

Scaling 0.01 mm / 0.0005 inch

Display Liquid crystal, height of digits 10 mm

sign (-)

Battery 1 Stück SR 44

Jaw Aluminium alloy, high-strength

Finishing plasticized/galvan. Ni

Mailing address:

P. O. B. 1154

84464 Waldkraiburg Germany

Shipping address:

Schichtstr. 16

84478 Waldkraiburg Germany

Hans Schmidt & Co GmbH

Phone:

int. + 49 / (0)8638 / 9410-0

Fax:

int. + 49 / (0)8638 / 4825

int. + 49 / (0)8638 / 67898

More than 70 years - Worldwide -

e-mail:

[email protected]

Internet:

http://www.hans-schmidt.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Schmidt

Schmidt

Schmidt FS1-422 Manual de usuario

Schmidt

Schmidt SC Series Manual de usuario

Schmidt

Schmidt DN Series Manual de usuario

Schmidt

Schmidt FGP 01.E Manual de usuario

Schmidt

Schmidt SS 20.600 E Series Manual de usuario

Schmidt

Schmidt DX Series Manual de usuario

Schmidt

Schmidt ZE Series Manual de usuario

Schmidt

Schmidt D-2005 Series Manual de usuario

Schmidt

Schmidt Paper Schmidt PS8000 Manual de usuario

Schmidt

Schmidt DNW-100K Manual de usuario

Schmidt

Schmidt MK Series Manual de usuario

Schmidt

Schmidt DHT-2 Manual de usuario

Schmidt

Schmidt DHT-3 Manual de usuario

Schmidt

Schmidt SS 20.400 Manual de usuario

Schmidt

Schmidt DW-U Manual de usuario

Schmidt

Schmidt ZED Manual de usuario

Schmidt

Schmidt ZE Series Manual de usuario

Schmidt

Schmidt RS8000 Manual de usuario

Schmidt

Schmidt FS Series Manual de usuario

Schmidt

Schmidt SS 20.250 Manual de usuario

Schmidt

Schmidt OS8000 Manual de usuario

Schmidt

Schmidt FS-422 Series Manual de usuario

Schmidt

Schmidt G4 Manual de usuario

Schmidt

Schmidt TS Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario