Schmersal BN 310-2RZ Manual de usuario

Technical data

Standards: IEC 60947-1

Enclosure: glass-fibre reinforced thermoplastic

Operating principle: magnetic

Actuating magnet: BP 310, BP 15

Protection class: IP67 to IEC 60529

Ambient temperature:

- Storage temperature: –25 °C … +70 °C

Switching voltage: max. 200 VAC/DC

Switching current: max. 1 A

Switching capacity: max. 120 VA 30 VA, W

Switching time “Close“: max. 2 ms

Switching time “Open”: max. 0.07 ms

Bounce duration: max. 0.5 ms

Mechanical life: 1,000,000,000 operations

Electrical life: 106… 109operations

depending on load

Resistance to shock: 30 g / 11 ms

Resistance to vibration: 10 … 55 Hz

amplitude 1 mm

Electrical connection: Cable LiYY 4 x 0.25 mm², 1 m

B10D to ISO 13849-1:

- NC contacts (at 20 % contact load): 20,000,000

- NO contacts (at 20 % contact load): 20,000,000

Further information along with the latest applicable

declaration of conformity can be found in the Schmersal

catalogues or in the online catalogue on the Internet:

www.schmersal.net.

Dimensions (in mm)

Magnetic reed switch BN 310

(actuator BP 310 same dimensions)

4,5

0,5

7,5

6,5

3,5

18,5

1000

rd (N) gn (S)

Optional actuator

BP 15 N

BP 15 S

90°

ø 4,3

ø 20

Purpose

The magnetic reed switch is designed to monitor the position of movable

protective equipment.

Only the listed magnets may be used for actuation of the magnetic reed

switch. Only these magnets can guarantee flawless function and repeat

accuracy.

The magnetic reed switch has two separate NC contacts or

1 NO contact/1 NC contact with latching function.

With suitable evaluation and concealed installation, the requirements

for safety applications up to PL e in accordance with ISO 13849-1

can be satisfied.

The magnetic reed switch is classified as uncoded switchgear

type 3 in accordance with ISO 14119.

Observe country-specific regulations for installation, safety,

accident prevention and also rules governing proper disposal.

BN 310-2RZ

BN 310-11RZ

Operating instructions

Magnetic reed switches

x.000 / 08.2018 / v.A. - 101182992-EN / D / 2018-07-31 / AE-Nr. 9732

EN Operating instructions. . . . . . . . . . . . .pages 1 to 2

Original

Operating instructions

Magnetic reed switches

BN 310-2RZ

BN 310-11RZ

Mounting

When mounting to protective equipment, the requirements of

standard ISO 14119 must be taken into account.

Magnetic reed switches and magnets pass one another over the front

surface.

• The component can be mounted in any position.

• Do not use devices as limit stops.

• Ensure the magnetic reed switch is mounted on a flat surface to

avoid tensile stresses that could damage the magnetic reed switch or

lead to varying switching distances.

• Inseparably mount magnetic reed switches and magnets to protective

equipment (tamper-proof screws, e.g. Torx with pin, rivets, etc.).

• Do not expose magnetic reed switches or magnets to strong vibrations

or shocks.

• The mounting distance between two sensors should always be at

least 50 mm.

To avoid any interference or reduction in the switching distances,

please observe the following guidelines:

• If possible do not install the magnetic reed switch and magnet on

ferromagnetic material.

• Do not install magnetic reed switches and magnets in strong

magnetic fields.

• Keep away from metal chips.

Switching distance

BP 310-1S, BP 310-1N X = 10 mm

BP 310-2S, BP 310-2N X = 15 mm

BP 15 S, BP 15 N X = 20 mm

Actuation and switching distances

BN 310-2RZ

with actuators BP 310-1S,

BP 310-2S, BP 15 S

BN 310-11RZ

with actuators BP 310-1S,

BP 310-2S, BP 15 S

10 +

3mm

10 +

3mm

WH/BK

BU/BN

BN 310-2RZ

with actuators BP 310-1N,

BP 310-2N, BP 15 N

BN 310-11RZ

with actuators BP 310-1N,

BP 310-2N, BP 15 N

10 +

3mm

10 +

3mm

WH/BK

BU/BN

Key

A: Actuation direction

B: Switching behaviour of reed contacts

X: Switching distance

K.A. Schmersal GmbH & Co. KG

Möddinghofe 30, D - 42279 Wuppertal

Postfach 24 02 63, D - 42232 Wuppertal

Phone: +49 - (0)2 02 - 64 74 - 0

Telefax: +49 - (0)2 02 - 64 74 - 1 00

E-Mail: [email protected]

Internet: http://www.schmersal.com

Contact variants

The electrical connection may only be carried out by

authorised personnel in a de-energised condition.

The magnetic reed switches must be wired in accordance with the

specified wire colours.

BN 310-2RZ

2 NC contacts, latching

BN 310-11RZ

1 NO contact / 1 NC contact, latching

Disassembly and disposal

Disassembly

The switch must be disassembled in a de-energised condition only.

Disposal

The switch must be disposed of in an appropriate manner in

accordance with the national prescriptions and legislations.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de schmersal

schmersal

schmersal TQ 700 S Manual de usuario

schmersal

schmersal EX-AZ 335 Manual de usuario

schmersal

schmersal TESK Series Manual de usuario

schmersal

schmersal AZM300Z-I2-ST-SD2P-T Manual de lista de piezas

schmersal

schmersal AZM300B-I2-ST-SD2P-DU Manual de operación y mantenimiento

schmersal

schmersal ZSD5 Manual de usuario

schmersal

schmersal AZM300B-I2-ST-SD2P-A Manual de usuario

schmersal

schmersal AZM300B-ST-1P2P-A Manual de usuario

schmersal

schmersal AZ 200 T Manual de usuario

schmersal

schmersal TV.S 355 Manual de usuario

schmersal

schmersal AZ 200 T Manual de usuario

schmersal

schmersal TVS 410 Manual de usuario

schmersal

schmersal EX-AZ 415-ZPK-3D Manual de usuario

schmersal

schmersal AZM300B-I2-ST-1P2P-A-DU Manual de usuario

schmersal

schmersal AZ 415 Series Manual de usuario

schmersal

schmersal AZM300B-I1-ST-1P2P Manual de operación y mantenimiento

schmersal

schmersal TQ 700 Manual de usuario

schmersal

schmersal TVS 400 Manual de usuario

schmersal

schmersal AZ201 Manual de usuario

schmersal

schmersal WKT Series Manual de programación

schmersal

schmersal EX-Z 355 Series Manual de usuario

schmersal

schmersal TFH 232 AS Manual de usuario

schmersal

schmersal TQ 900 Manual de usuario

schmersal

schmersal AZ 415-02/02YPK-2537-1 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

schmersal BN 310-2RZ Manual de usuario

Manuales populares de Cambiar de otras marcas