5
TECHNICAL DATA AND DIMENSIONS
Materials
Steel plate
Galvanised sheet
Ceramic stone/vermiculite
Chamotte
Robax glass
Scan 1004-B – Test in compliance with EN 13240
Combustion chamber Ceramic
stone
Vermi-
culite
CO Emission at 13% O20,09 0,07 %
CO Emission at 13% O21148 832 mg/Nm3
Dust @ 13% O229 27 mg/Nm3
Nox@ 13% O295 95 mg/Nm3
Efficiency 81 80 %
Energy efficiency index 108 105
Energy efficiency class A+ A
Nominel output 8 8 kW
Chimney temperature
EN 13240 242 260 °C
Temperature in flue conn.
piece 290 312 °C
Amount of smoke 7,4 7,4 g/sec
Sub-pressure EN 13240 12 12 Pa
Recommended sub-pressure
in connecting piece 16-18 16-18 Pa
Required combustion air supply 22,5 22 m3/h
Fuel Wood Wood
Fuel consumption 2,4 2,4 kg/h
Amount of fuel required to light 2 2 kg
Amount of fuel, max. 3 3 kg
* Intermittent operation in this context means normal use of
a wood-burning stove. In other words, you should let the fire
die down until only the embers are left before refuelling.
Scan 1004-B is produced in accordance with type
approval for the product, which also covers the product’s
Assembly and Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan-stoves.com
Surface treatment Senotherm
Max. wood length Scan 1004-B 65 cm
Weight Scan 1004-B (Ceramic stone) ca. 177 kg
Weight Scan 1004-B (Vermiculite) ca. 160 kg
Weight big box ca. 41 kg
Connecting piece internal diameter 144 mm
Connecting piece external diameter 148 mm
Approval type Intermittent
fuelling*
EN 13240 was carried out on the installation shown on page 7.
