Savant Pro Host Manual de usuario

Super Pro Host Quick Reference Guide | 009-1981-00 45 Perseverance Way, Hyannis, MA 02601

Savant® Super Pro Host (SVR-7100S) Quick Reference Guide

Box Contents

(1) Super Pro Host [SVR-7100S]

(1) Power Cord

(1) Magic Mouse 2

(1) Magic Keyboard w/Numeric Keypad

(1) USB-C to Lighting Cable

(2) Rack Rails (ships in a separate box)

(1) Quick Reference Guide [this document]

Speciﬁcations

Environmental

Temperature 50° to 95° F (10° to 35° C)

Humidity 5% to 95% Relative Humidity (non-condensing)

Dimensions and Weights

Height 8.67 in (22.02 cm)

Width 18.98 in (48.20 cm)

Depth 21.24 in (53.95 cm)

Weight 38.8 lbs (17.6 kg)

Rack Space 5U

Minimum Rack Depth 24.00 in (60.96 cm)

Power

Input Power 100-240V AC 50/60Hz, single phase

Maximum Power 1280W at 108–125V or 220–240V

1180W at 100–107V

Memory

RAM 32 GB

Compliance

Safety and

Emissions

FCC Part 15 CE C-Tick

RoHS Compliant

Minimum Supported Release

Savant OS da Vinci 9.3.2

Mounting

The SVR-7100S comes with rack rails. To install these

rails scan the QR code to the right or visit the Apple

Support website and search for Install Mac Pro into a

rack to review the article to install the Host.

Additional Documentation

For additional information, refer to the following documents on the

Savant Customer Community at Savant.com

–Savant Super Pro Host Deployment Guide (009-1633-xx)

Front Panel

EDC

ASlide Rail

Locks

Depress both at the same time to allow the

Host to slide out on the rails.

BHandles Used as handholds to assist in pulling the Host

alone the rack rails.

CThunderbolt 3 (2) Thunderbolt 3.

(Reserved for future use)

DPower LED Illuminates White when host is powered On.

EPower Button

Power On: Press while powered O.

Power O: Press and hold while powered On

until power LED goes out.

Side Panel

Slide

Mounting

Points

Mounting points for the included rack rails.

Component

Access Latch

Latch on both sides to remove the component

access cover.

Super Pro Host Quick Reference Guide | 009-1981-00 45 Perseverance Way, Hyannis, MA 02601

Rear Panel

APower LED Illuminates White when host is powered On.

Power Input 100-240V AC 50/60Hz

CEthernet

(2) 8-pin RJ-45 port 10/100/1000 Base-T auto-

negotiating port.

IMPORTANT! For Savant conﬁguration, the right

port is the only supported network connection.

The port on the left is blocked to avoid

confusion.

DHDMI Output (2) 19-pin type A HDMI female.

(Reserved for future use)

EAudio Output 3.5 mm (1/8 in) Audio output. Audio output

supports analog and optical connections.

FThunderbolt 3 (2) Thunderbolt 3.

(Reserved for future use)

GUSB (2) USB 3.0 Type A.

(Reserved for future use)

Network Requirements

Savant requires the use of commercial grade network equipment

throughout the network to ensure the reliability of communication

between devices. Connect all Savant devices to the same local

area network (LAN) or subnet as the host. Savant recommends

not implementing any type of trac or packet shaping in your

network topology for the Savant devices as this may interfere with

performance

IMPORTANT! Use of the Host Wi-Fi connection may result in

control or connectivity issues.

Network Conﬁguration

To ensure that the IP Address will not change due to a power outage,

Savant recommends using DHCP reservation within the router. By

using this method, static IP Addresses for all devices can be managed

from a single UI, avoiding the need to access devices individually.

Setting DHCP reservation varies from router to router. Refer to the

documentation for the router to conﬁgure DHCP reservation.

Network Changes

After connecting to a new network, changing routers, or if the IP

Address range is changed in the current router, Savant recommends

the following steps. This will reset any IP connection and ensure that

the host is communicating with the network correctly.

Hot Plug the Ethernet (LAN) Connection

1. Disconnect the Ethernet (LAN) connection from the host.

2. Wait 15 seconds and then reconnect.

Otros manuales para Pro Host

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de Savant

Savant

Savant CLI-8000 Series Manual de usuario

Savant

Savant SKL-3040-00 Manual de usuario

Savant

Savant Pro Host SVR-5200S-00 Manual de usuario

Savant

Savant VOM-VP01F Manual de usuario

Savant

Savant VOM-VP02H Manual de usuario

Savant

Savant SKL-3040-00 Manual de usuario

Savant

Savant Smart Host Rack Mountable Manual de usuario

Savant

Savant GPM-CP2R20120-21 Manual de usuario

Savant

Savant SmartView VOM-SV02 Manual de usuario

Savant

Savant IP Audio 125 with Savant Music 2.0 Manual de usuario

Savant

Savant CLI-10K4IN-00 Manual de usuario

Savant

Savant CLI-PTAC1K1 Manual de usuario

Savant

Savant Pro Host Manual de usuario

Savant

Savant SSC-P008 Manual de usuario

Savant

Savant SKL-3040-00 Manual de usuario

Savant

Savant ITP-E8000 Series Manual de usuario

Savant

Savant SAV-LMP-0300 Manual de usuario

Savant

Savant CLI-1WIRE2 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario