
6
SAFETY INFORMATION
SAFETY
INFORMATION
These instructions for installation and use
are intended for the sauna owner or main-
tenance provider, as well as the electrician
responsible for installing the heater with
a sauna room indoor climate device. After
installing the heater with an indoor climate
device, the instructions must be handed
over to the owner or maintenance provider.
Before using the Saunum Spa Session
heater with an indoor climate device (here-
inafter ‘sauna climate device’), read the in-
stallation and safety instructions.
The sauna climate device is intended for
heating the sauna room at 60–90 °C and for
regulating the sauna room climate during
steaming.
NB! The climate control unit and the
heater of the sauna must not be ope-
rated in temperatures exceeding 90 °C!
NB! Do not use the sauna climate device
for any other purposes!
NB! To connect the sauna climate device
to the power network, a control device for
the control of electric heaters is required.
The control device must correspond to
the power of the heater used according to
Table1.
The control device must have the ability to
control the fan of the sauna climate device,
and the function of simultaneously switch-
ing o the heater and the fan of the sauna
climate device is recommended.
Table 1
Power
6 kW
9 kW
3 phase
protection
C10
Power cable mm
3 phase
Device
Saunum Spa Session 190 cm
The minimum height
of the ceiling
190 cm
5 x 2,5
Saunum Spa Session C16 5 x 2,5