SATO SG112-ex Manual de usuario

BARCODE PRINTER

SG112ex +RTC

(KITTING MANUAL)

30/SEP/2019

Technical Department SPZ

PE-E30A02

Required tools:

•Phillips screwdriver (JIS #2, or equivalent)

To Install the Optional Real-time Clock Kit

Power off the product and disconnect the AC power cord.

Remove three screws 1 on the top of

front panel and left cover.

Remove two screws 2 on the back of

left cover.

With the media tray 3 pulled out, slide

the cutter cover 4 upwards to remove

it.

Release the hook at the lower part of

front panel, slide the front panel tothe

right and remove the screw 5 securing

the left cover.

Remove the left cover carefully so that

the KB cables are not disconnected.

Removetwo

screws

6andthenremove

the

RTC bracket

Install the

RTC PCB

(

to the

RTC

bracket

8bytighteningtwo

screws

(Torque: 7-8kgf-cm).

Install the

RTC bracket

back to the

product by tightening two

screws

(Torque:7-8kgf-cm),andwindthe

RTC

cables

one round as shown.

Connectthe

RTCcables

tothe

CN6

RTCconnector

onthe

main

(CONT)

PCB

Install the left cover and tighten the

screw 5 at the lower part in front.

CN6 RTC

Tighten two screws 2 at the back of the

left cover.

Tighten one screw 1 at the top of the

left cover.

Make sure that the KB cables are

connected to the operator panelKB

PCB.

Install the front panel and tighten two

screws 1 on the top.

Install the cutter cover 3 and push back

the media tray 4.

6.1.2 To set the calendar (date and time)

1 Press the power switch of the product to

the “I” (on) position.

2 When the product is in online mode,

press the LINE button to change the

product to offline mode.

3 Press the ENTER button.

The product changes to setting mode menu.

4 Select the ADVANCED MODE using the

/ / / buttons.

ADVANCED MODE shows on the screen and the

icon is highlighted in reverse.

5 Press the ENTER button to enter the

advanced mode.

Note

If password function is enabled, PASSWORD is shown

on the screen instead. In this case, enter the password

first.

6 Press the ENTER button again until SET

CALENDAR shows on the screen.

7 Press the / buttons to select YES and

press the ENTER button to enter the

calendar setting.

8 Set the Year/Month/Date and the time in 24

hour format using the / / / buttons.

Press the ENTER button to enter the

setting.

9 Input again the same Year/Month/Date/

Time and press the ENTER button to

confirm calendar setting.

10 Press the ENTER button to enable the

calendar check function.

11 Do a factory test printing to make sure that the date and time can be printed on the

label.

Otros manuales para SG112-ex

Otros manuales de Lector de código de barras de SATO

SATO

SATO CL6NX Manual de usuario

SATO

SATO CL4NX Plus Manual de usuario

SATO

SATO CT4-LX1 Manual de usuario

SATO

SATO CT4i Series Manual de usuario

SATO

SATO CL4NX RIDF Manual de usuario

SATO

SATO Argox P4 Series Manual de usuario

SATO

SATO PV3 Manual de usuario

SATO

SATO ARGOX AS-9400BT Manual de usuario

SATO

SATO ARGOX AS-9400DC Manual de usuario

SATO

SATO PV4 Manual de usuario

SATO

SATO ARGOX AS-9400 Manual de usuario

SATO

SATO GT400 series Manual de usuario

SATO

SATO TC408 Manual de usuario

SATO

SATO ARGOX AS-9400DC Manual de usuario

SATO

SATO M-8400RVe Series Manual de usuario

SATO

SATO Argox D4 Series Manual de usuario

SATO

SATO Argox D4 Series Manual de usuario

SATO

SATO MB400I Manual de usuario

SATO

SATO PV3 Manual de usuario

SATO

SATO GL 4xxe Series Manual de usuario

SATO

SATO ARGOX AS-9400 Manual de usuario

SATO

SATO MB410i Manual de usuario

SATO

SATO ARGOX AS-9400BT Manual de usuario

SATO

SATO DR300 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario