SATO MB200 Manual de usuario
Barcode Printer MB200
MB200
Quick Guide
SATO#MB200#E#Hyo_1.p65 02.5.17, 2:50 PM1
2
Warning!
SATO#MB200##E.p65 02.5.17, 2:23 PM2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,and
(2)This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE : This equipment has been tested and found to
pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against
equipment generates use and can radiate radio
frequency energy and,if not installed and used in
interference to radio communications.However,there
particular installation.If this equipment does cause
harmful interference to radio or television reception,
off and on,the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
-Connect the equipment into an outlet on a circuit
-Consult the dealer or an experienced radio/TV
comply with the limits for a Class B digital device,
harmful interference in a residential installation.This
accordance with instructions,may cause harmful
is no guarantee that interference will not occur in a
which can be determined by turning the equipment
receiver.
different from that to whcih the receiver is connected.
technician for help.
3
Features of the MB200
With compact and lightweight body combined with high
performances, this printer prints barcodes clearly on various
types of thermal paper.
ÐExcellent Printing Performance
Not only does this printer print barcodes clearly, but it can
also enlarge and print various types of fonts and Kanji
characters in a free layout.
ÐDurable and Easy to Use
This printer is also superb in durability, as it has been
designed with the premises of printing barcodes. Also,
special consideration has been taken so that the printer can
be easily cleaned everyday.
ÐDispenser Function
As a portable printer, this printer can easily print and
dispense labels to enable the application of labels at site.
SATO#MB200##E.p65 02.5.17, 2:23 PM3
4
Table of Contents
1. Safety Precautions ......................................5
Markings and Symbols .............................5
Precautions in Use .................................13
2. Unpacking..................................................14
3. Parts Name................................................15
Name and Function of Operating Parts ..17
4. Before Starting...........................................18
Charging the Battery Pack...................... 18
Installing and removing the Battery Pack ..
20
Setting Labels .........................................22
Preparation/Operation
SATO#MB200##E.p65 02.5.17, 2:23 PM4
5
Safety Precautions
1
1. Safety Precautions
In this section, safety precautions about printer operation are
explained to ensure proper care and usage. Make sure to
read these carefully before using your printer.
Markings and Symbols
The following symbols or markings are used in this quick
guide and on the printer so that you can properly use the
printer, and to prevent any damage to property, harm or
injury to yourself and others. Make sure to read their
explanations carefully to familiarize yourself with their
meanings.
This symbol indicates information that, if
ignored or applied incorrectly, creates the
danger of death or serious personal
injury.
This symbol indicates information that, if
ignored or applied incorrectly, creates the
possibility of personal injury or property
damage.
Warning
Caution
SATO#MB200##E.p65 02.5.17, 2:23 PM5
1
6
Safety Precautions
Symbol example
The triangle ( ) indicates something you should
take absolute care when doing. The cautions are
indicated concretely within the symbol. The symbol
on the left indicates caution with electric shock.
A diagonal line within a circle ( ) indicates
something you should not do. The symbol on the left
indicates you should not try to take the unit apart.
A black circle ( ) indicates something you need to
do. The symbol on the left indicates you should
unplug the unit from the wall outlet.
SATO#MB200##E.p65 02.5.17, 2:23 PM6
7
Safety Precautions
1
Warning!
Liquids
Do not place any containers with water or chemicals,
such as flower vases or cups, as well as small
metallic objects near the printer. If any of these
should fall into the printer, immediately turn off the
power and contact your nearest dealer or service
center. Continued use creates the danger of fire or
electrical shock.
Foreign Matter
Do not drop or insert metallic or flammable objects
into the openings on the printer (such as outlets for
cables). If any of these should fall into the printer,
immediately turn off the power and contact your
nearest dealer or service center. Continued use
creates the danger of fire or electrical shock.
Dropping and Damage
Should the printer ever fall or otherwise become
damaged, immediately turn off the power and contact
your nearest dealer or service center. Continued use
creates the danger of fire or electrical shock.
SATO#MB200##E.p65 02.5.17, 2:23 PM7
1
8
Safety Precautions
Warning!
Abnormal Conditions
Continued use of the printer while it is emitting smoke
or strange odor, creates the danger of fire or electrical
shock. Immediately turn off the power and contact
your nearest dealer or service center for repairs. Do
not try to service the printer by yourself.
Disassembly
Never try to take the unit apart or modify it in any
way. Doing so creates the danger of fire or electrical
shock. Contact your nearest dealer or service center
for repairs.
Battery Pack
•Never try to take apart the battery pack or modify it
in any way such as with a solder.
•Never expose the battery to direct flame, throw it
into fire, or take any actions that may lead to
shorting.
•When charging the battery pack, make sure to use
the specified battery charger.
SATO#MB200##E.p65 02.5.17, 2:23 PM8
9
Safety Precautions
1
Warning!
AC Adapter / Battery Charger (Optional)
•Use only the specified voltage. Using a different
voltage may create the danger of fire or electrical
shock.
•Never use the battery charger with any other
battery pack except for the specified one. Doing so
can rupture the battery, cause leakage, fire or
electrical shock.
•Never cut, damage or modify the power cord. Also,
never place heavy objects on, set fire to or pull the
power cord, as it can damage the cord and create
the danger of fire or electrical shock.
•Should the power cord ever become seriously
damaged (internal wiring exposed or shorted),
contact your nearest dealer or service center.
Continued use of such a cord creates the danger of
fire or electrical shock.
•Never modify, excessively bend, twist, or pull the
power cord. Doing so creates the danger of fire or
electrical shock.
SATO#MB200##E.p65 02.5.17, 2:23 PM9
1
10
Safety Precautions
Caution!
Location
Do not locate the printer in areas subjected to high
humidity or dew. If dew forms inside the printer,
immediately turn off the power and do not use it until
it has dried up. Continued use creates the danger of
electrical shock.
PowerNever operate the power switch, replace the battery
pack or unplug the AC adapter or battery charger with
wet hands. Doing so creates the danger of electrical
shock.
SATO#MB200##E.p65 02.5.17, 2:23 PM10
This product is intended to be supplied by a power
supply(AC adapter)identified as both of the following:
A.Listed Power Unit marked"class2"or I.T.E Power
Supply marked"LPS"or UL1950 Power Supply marked
"LPS"and rated 7.2V to 9.0Vdc,3000mA;and
B.CB certified AC adapter,Model SA130A-0930U-S
rated 8.4Vdc or 9.0Vdc,or an alternate CB certified AC
Adapter which will be added in the CB certification of
the product.
Otros manuales para MB200
4
Tabla de contenidos
Otros manuales de Lector de código de barras de SATO
SATO
SATO ARGOX AS-9400DC Manual de usuario
SATO
SATO ARGOX AS-9400DC Manual de usuario
SATO
SATO Argox D4 Series Manual de usuario
SATO
SATO ARGOX AS-9400 Manual de usuario
SATO
SATO CL4NX RIDF Manual de usuario
SATO
SATO Argox P4 Series Manual de usuario
SATO
SATO PV3 Manual de usuario
SATO
SATO MB400I Manual de usuario
SATO
SATO CL4NX Plus Manual de usuario
SATO
SATO MB200 Manual de usuario
SATO
SATO ARGOX AS-9400 Manual de usuario
SATO
SATO GL412e Manual de usuario
SATO
SATO Argox P4 Series Manual de usuario
SATO
SATO PV3 Manual de instrucciones
SATO
SATO Argox D4 Series Manual de usuario
SATO
SATO ARGOX AS-9400BT Manual de usuario
SATO
SATO Argox AR-3100 Manual de usuario
SATO
SATO DR300 Manual de usuario
SATO
SATO S8400 Manual de usuario
SATO
SATO CL4NX RIDF Manual de usuario
