Satel WZ-100 Manual de usuario

WZ-100

REMOTE ALARM INDICATOR wz-100_en 06/15

The WZ-100 remote alarm indicator provides information by steadily lit LED that an alarm has

been reported by a detector or group of detectors. It is designed to be interfaced with

DMP-100, DRP-100 and DCP-100 detectors.

1. Installation

The remote alarm indicator is designed for indoor operation and should be installed in places

where it will be well-visible.

Disconnect power before making any electrical connections.

The length of wires connecting the indicator with the detector must not exceed

10 meters.

1. Turn the cover clockwise (Fig. 1) and remove it (Fig. 2).

2. Make holes for screws and cable in the enclosure base.

3. Run the cable through the hole in enclosure base.

4. Secure the enclosure base to the ceiling or wall, using wall plugs (screw anchors) and

screws.

5. Screw the wires to the corresponding terminals. Connect the indicator terminal marked by

the "-" sign to the terminal designated by the digit 2 in the detector base, and the terminal

marked by the "+" sign – to the terminal designated by the digit 3 or 4. An example of

connection of the remote alarm indicator to the detector is shown in Fig. 3.

6. Put the cover back and turn it counterclockwise.

2 WZ-100 SATEL

2. Specifications

Supply voltage ................................................................................................... up to 2.4 V DC

Average current consumption (from the detector)......................................................4...4.4 mA

Permissible current (requires an external current limiter)........................................up to 10 mA

Operating temperature range.............................................................................-10 °C...+55 °C

Maximum humidity..........................................................................................................93±3%

Enclosure dimensions..........................................................................................ø 97 x 37 mm

Weight.................................................................................................................................48 g

The WZ-100 remote alarm indicator meets the essential requirements of the Technical

Approval CNBOP AT-0117-0401/2013 and the essential requirements of the European Union

Directive:

EMC 2004/108/ EC Electromagnetic Compatibility Directive.

A Polish Certificate of Conformity 2892/2013 was issued by the CNBOP-PIB Jozefow

Certification Body for the remote alarm indicator to confirm its compliance with the

requirements of the Technical Approval.

The Certificate can be downloaded from the www.satel.eu website.

The Declaration of Conformity, designated SATEL/B/2892/2013, of 2013-08-27 for the

WZ-100 remote alarm indicator is available, upon request, from the Manufacturer.

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. + 48 58 320 94 00

www.satel.eu

Tabla de contenidos

Otros manuales de Sistema de seguridad de Satel

Satel

Satel ASP-200 Manual de usuario

Satel

Satel CA-4M Instrucciones de funcionamiento y mantenimiento

Satel

Satel CA-64 E Manual de usuario

Satel

Satel CSP-204 Manual de instalación

Satel

Satel SPLZ-1011 Manual de usuario

Satel

Satel ASP-105 Manual de usuario

Satel

Satel APD-200 Manual de usuario

Satel

Satel INT-TSG Manual del propietario

Satel

Satel ROP-101/EU Manual de usuario

Satel

Satel ASP-205 Manual de usuario

Satel

Satel SP-6500 Manual de usuario

Satel

Satel ABAX 2 Manual de usuario

Satel

Satel SP-4002 Manual de usuario

Satel

Satel SPL-5010 Manual de usuario

Satel

Satel ASP-100-R Manual de usuario

Satel

Satel SPL-5010 Manual de usuario

Satel

Satel SPL-2010 Manual de usuario

Satel

Satel ASP-105 Manual técnico

Satel

Satel Micra MSP-300 Manual de usuario

Satel

Satel ASP-100 Manual de usuario

Satel

Satel SP-4001 Manual de usuario

Satel

Satel Versa Manual de usuario

Satel

Satel SP-4002 Manual de usuario

Satel

Satel SD-3001 R Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario