Saramonic SR-MV2000W Manual de usuario
User Manual
用户手册
Wired/Wireless Dual-Function Microphone
有线/无线双功能麦克风
SR-MV2000W
TX
①Headphone volume
control
②Gain/mute control
③Type-C port
④ 3.5mm headphone jack
⑤ Locking knob
⑥ Smart LED indicator
⑦ Battery level indicator
⑧ Power/pair button
⑨ Mic stand
Product Structure
③
②
⑥
⑦
⑧
⑨
①
⑤
④
1. Magnetic Base
It can be mounted to a
boom arm (not included)
5/8’’ screw
hole
Functions
RX
Accessories
① 3.5mm headphone jack
② Type-C connector
③ Volume control (+/-) / Pair button
④ Mono/stereo switch
⑤ Power indicator
Type-C female to
USB-A male adapter
3/8’’ to 5/8’’
screw adapter
②
⑤
③
④
USB-A to
Type-C cable Type-C to
Type-C cable
①
2. Angle Adjustment
Screw
Unscrew
Battery Charging
Status
Charging (breathing white light)
Full charged
Current battery level (75% power)
Low battery (25% power)
Indicator
A - Wired Operation
1. Connect the microphone to your smartphone/computer
2. Adjust the knobs according to your needs
Direct/Playback Monitoring
MIC
(Direct
monitoring)
USB
(Playback
monitoring) GAIN MUTE
Press the button to switch between
direct and playback monitoring;Turn the knob to adjust the
headphone volume.
Control Button
Smart LED
Indicator Color
Operating
Gain/Mute Control
Press the button to mute/unmute the
microphone;
Turn the knob to adjust gains for
microphone input level.
Operation Guide
Windows 7/10
Mac OS 10.12 or later
Devices
Connection
System
Requirements
Smartphone Computer
Type-C to Type-C cable; Type-C
to Lightning cable (not included)
Andriod/iOS devices
USB-A to
Type-C cable
Restore factory setting
USB-A to
Type-C cable
Type-C to
Type-C cable
Note:
1. SR-MV2000W is also compatible with iOS devices.
The Type-C to Lightning adapter cable is not
included. Please purchase it separately if needed.
2. For optimum sound, please press and hold the
volume control and gain control knobs
simultaneously to restore factory setting. The
indicator will turn red and blinks three times.
B - Wireless Operation
1. Turn on the transmitter
3. TX & RX Pairing
2. Connect the receiver to an external device
①. Connect to a Type-C
device ②. Connect to a USB-A device
Unpaired
Status Indicator light colour
green light flashes in cycle
Press and hold the
power button
TX
RX
Connect a headphone
for audio monitoring
Pairing green light flashes rapidly
solid green light
Paired
Successfully
Unpaired
Status Indicator light colour
blue light flashes slowly
Pairing blue light flashes rapidly
solid blue light
Paired
Successfully
Note: When using the wired function,
short press the power button to enable
the wireless function simultaneously.
Note: If you ever need to use two USB mic in one device, you can simply add a
second SR-MV2000W wireless transmitter (sold separately) and make it a
2-person wireless microphone. To add a second SR-MV2000W transmitter, please
repeat the above pairing operation.
Double-click the
pair button to enter
pairing mode
Press + and - buttons
simultaneously to
enter pairing mode, TX
and RX will be
successfully paired
within 10s.
Wired Operation
Specifications
Packing List
Mic Capsule
Polar Pattern
Frequency Response
Sensitivity
Signal-to-Noise Ratio
Maximum SPL
Sampling Rate
Bit Rate
Mic Gain
Working Voltage
Audio Output Connector
Operating Temperature
Storage Temperature
14mm Electret Condenser Capsule
Cardioid
20Hz-20kHz
-36dB (0dB=1V/Pa, 1kHz1Pa)
80dB
120dB
48kHz
16bit/24bit
0~54dB
5V110mA
3.5mm Headphone Jack, Type-C Port
0°Cto50°C
–20°Cto+55°C
Maximum SPL
Transmission Type
Modulation
Antenna
Operating Range
RF Output Power
Distortion
Battery Life
Charging Time
Battery Capacity
Dimensions
Weight
120dB
2.4GHz
GFSK
DipoleAntenna
60m (Outdoors without obstacles)
<10mW
<0.05%
6 hours
1.5 hours
850mAh
TX: 165×78.6×90mm
RX: 71.6×27.1×10.55mm
TX: 359g
RX: 12.5g
Wireless Operation
Mic Capsule
Polar Pattern
Frequency Response
Sensitivity
Signal-to-Noise Ratio
14mm Electret Condenser Capsule
Cardioid
35Hz-18kHz
-36dB (0dB=1V/Pa, 1kHz1Pa)
80dB
SR-MV2000W Microphone×1
Wireless Receiver×1
Type-C Female to USB-A Male Adapter×1
3/8’’ to 5/8’’ Screw Adapter×1
6.6’(2m) USB-A to Type-C Cable×1
6.6’(2m) Type-C to Type-C Cable×1
TX
③
②
⑥
⑦
⑧
⑨
①
⑤
④
① 耳机音量调节旋钮
② 增益/静音控制旋钮
③ Type-C接口
④ 3.5mm耳机插孔
⑤ 锁紧旋钮
⑥ 智能LED指示灯
⑦ 电量指示灯
⑧ 电源/配对键
⑨ 麦克风桌面支架
产品结构
Frequency Response（0dB=1V/Pa）
Polar Pattern
Frequency Response
180°
0°
䲓eC䲔䲓I{䲔
-30 0
-20 0
-10 0
0 0
10 0
20 0
30 0
40 0
1. 磁吸底座
可安装在悬臂杆
（不标配）上
5/8英寸
螺母孔
功能
RX
配件
① 3.5mm耳机插孔
② Type-C接口
③ 耳机音量调节(+/-) / 配对键
④ 单声道/立体声切换键
⑤ 电源指示灯
Type-C母头转
USB-A转接头
3/8’’转5/8’’
支架转换螺母
USB-A转
Type-C数据线
Type-C转
Type-C数据线
②
⑤
③
④
①
2. 麦克风角度调节
拧紧
松开
电池充电
状态
充电中（呼吸灯闪烁状态）
充满电
当前电量 (仅为示意：电量75%)
低电量 (电量25%)
指示灯
Windows 7/10
Mac OS 10.12以上
设备
连接
系统支持
A - 有线操作
1. 将麦克风连接至手机/电脑
注意：
1. SR-MV2000W 也与 iOS 设备兼容。 包装内不含
Type-C转Lightning转接线，如需使用请另外购买。
2. 为获得最佳声音效果，请同时长按音量调节和增益
调节旋钮以恢复出厂（最佳）设置，指示灯变为红灯
并闪烁三下。
2. 根据录制需要调节旋钮
实时监听/回放监听
MIC
(实时监听)
USB
(回放监听) GAIN
(麦克风
实时音量)
MUTE
(静音)
短按旋钮切换实时监听模式和
回放监听模式
转动旋钮调节耳机监听音量
按键
智能LED指
示灯颜色
操作
增益/静音
短按旋钮进入/取消静音状态
转动旋钮调节麦克风增益
操作指南
手机 电脑
Type-C转Type-C数据线，Type-C
转Lightning转接线（不标配）
安卓/iOS设备
USB-A转
Type-C数据线
恢复出厂（最佳）设置)
USB-A转
Type-C数据线
Type-C转
Type-C数据线
Tabla de contenidos
Otros manuales de Micrófono de Saramonic
Saramonic
Saramonic Vmic Manual de usuario
Saramonic
Saramonic SR-TM1 Manual de usuario
Saramonic
Saramonic SmartMic MTV500 Manual de usuario
Saramonic
Saramonic Vmic Manual de usuario
Saramonic
Saramonic Vmic Manual de usuario
Saramonic
Saramonic Blink500 ProX RX Manual de usuario
Saramonic
Saramonic BTW Manual de usuario
Saramonic
Saramonic Vmic Pro Manual de usuario
Saramonic
Saramonic Vmic Pro Manual de usuario
Saramonic
Saramonic SR-MV7000 Manual de usuario
