Sanyo CE14AT3-GB Manual de usuario

CE14AT3-GB

INSTRUCTION

MANUAL

COLOUR

TELEVISION

CONTENTS

Safety precautions

Installation

Remote control

Controls

General operation

Picture menu

Clock menu

More menu

Tuning menu

Presetting

Other functions

Teletext

Connection of AV equipments

Functioning

Especifications

Environment recommendations

Servicing

Helpful hints

Hotel mode

7-8

8-9

10-11

12-14

14-15

SAFETY PRECAUTIONS

CAUTION: Please read and retain for

your safety. This unit has been engi-

neered and manufactured to assure

your personal safety. But improper use

can result in potential electrical shock

or fire hazards. In order not to defeat

the safeguards incorporated in this re-

ceiver, observe the following basic rules

for its installation, use and servicing.

Installation

Do not allow anything to rest on the po-

wer cord. Do not locate this television re-

ceiver where the cord will be damaged

by people walking on it. Do not over-

load wall outlets and extension cords.

Slots and openings in the cabinet and

in the back or bottom must not be bloc-

ked or covered.

This television receiver should never be

placed near or over a radiator or heater.

Do not replace your television receiver

on an unstable stand, shelf or table.

No naked flame sources, such as ligh-

ted candles or flower vases with water,

should be placed on the apparatus.

SAFETY PRECAUTIONS

If the television is built into a unit, or en -

closed, the minimum distances for ven-

tilation must be maintained. Heat build

up can reduce the life of your television

and can be dangerous.

Use

This television receiver should be ope-

rated only from the type of power sour-

ce indicated on the television or as indi-

cated in the Operating Instructions. If

you are not sure of the type of power

supply in your home, consult your sa-

les person or your local power com-

pany.

Never add accessories that have not

been specifically designed for this tele-

vision.

Do not drop or push objects into the te-

levision cabinet slots or openings. Ne-

ver spill liquids of any kind on the televi-

sion receiver.

Do not expose the television receiver to

rain or use near water. Before cleaning,

unplug the television receiver from the

wall socket. Do not apply liquid clea-

ners or aerosol cleaners directly onto

the television receiver. Use a damp

cloth for cleaning.

10cm

20cm

10cm

DISTANCIAS MÍNIMAS

MINIMUM DISTANCES

DISTÂNCIAS MÍNIMAS

5cm

220/240V

50 Hz

A. Mains supply

Connect the power cord of the te-

levision set to a wall outlet. When

the television set is not to be used

for an extended period of time, it is

advisable to disconnect the po-

wer cord from the power outlet.

Warning! High voltages are used

in the operation of this set. Refer

service to qualified service per-

sonnel.

B. Aerial connection

The aerial socket is located on the

back of television set. A colour pic-

ture of good quality requires a hig-

her aerial signal than a

black/white picture. If you tune

your set to a station with a weak

colour signal, television set auto-

matically changes to black/white

picture. For all aerial problems

please consult your local dealer.

For the best signal quality, the use

of a well shielded antenna cable is

recommended.

C. Battery installation

Two "AA" 1.5 volt batteries.

Important:

This equipment is fitted with an approved non rewireable UK mains plug. To chan-

ge a fuse in this type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS 1362 5 Amp A.S.TA. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an

appropriate plug fitted in its place. If the mains plug contains a fuse, this should

have a rating of 5 Amp. If a plug without a fuse is used, the fuse at the distribution

board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard

should it be inserted into a 13 Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -----> Neutral

Brown

1. The Blue wire must be connected to the terminal which is marked with the

letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or

colouredRED.

3. Do not connect either wire to the earth terminal in the plug which is marked

with the letter “E” or by the earth symbol or coloured GREEN or GREEN and

YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over

the seath of the lead - not simply over the wires.

---> Live

AC Mains Outlet

INSTALLATION

7575 TV FMTV FM

LOCAL

KEYBOARD

*See "Functions for videocassette" on page 12.

*See "Teletext controls" on pages 12-14.

*See local keyboard functioning on page 15.

CONTROLS

REMOTE CONTROL

WIDE

TV/

F/OK

P P

TXT/TV

456

789

-/---/--

CONTROLS

/ SYMBOLS

Function*

-/--

TV/

F/OK

WIDE

TV local keyboard*

Programme Up/Down

Level Down/Up

Stand-by

TV/AV Selection

Mute

0 to 9 Numeric buttons

2 Digit button

Alternate

Function

Recall

Normalisation

Key not operative

Remote control

Connectors

Mains ON/OFF

Programme Up

Programme Down

Level - / +

Video

Audio

Headphones

SET + ( )

Turning the television set on/off

Introduction screen

The following message appears on the screen

at the first switch on time.

Auto set-up completed. Happy viewing

Thank you for purchasing your SANYO TV.

Now I am searching and storing all the

programmes. Please Wait.

Auto Shut Off

The TV will automatically switch in-

to standby mode 10 minutes after

a signal is no longer received. The

time until the set will switch off is

desplayed on the screen.

Programme Selection

A. Next / Previous programme.

B. Direct programme selection

from 10 to 99.

Volume adjustment

Adjust the volume using the

and buttons.

NOTE: The television set cannot

be turned on using the mains

On/Off switch from Standby mode.

Turn off the television set

using the mains On/Off

switch if a power failure

occurs while the TV is

on.

Remote ON/OFF

Standby. To turn the TV into

standby mode,press the

button on the remote control unit.

The power indicator illuminates

more brightly.

To turn the television set on from

Standby mode, press any of the

following buttons: , , or

numeric buttons 0-9.

GENERAL OPERATION

Auto Sorting

When switching on the TV set for first time, it auto-

matically begins searching, storing and sorting of

all available channels, according to the following

programme position:

English

area

Irish

area

P1 P2 P3 P4 P5 P6 P7 P8 P9

BBC1 BBC2 ITV CH4 CH5 SKY

BBC-sat

RTE1 RTE2

When the TV set detects an English bordering area,

an preferably English area, or an Irish bordering

area, preferably Irish, will show the following messa-

ge so that you choose the way in which you want to

store the programmes, according to the following or-

der of the programme position:

English

bordering

area

Irish

bordering

area

P1 P2 P3 P4 P5 P6 P7 P8 P9

BBC1 BBC2 ITV CH4 CH5 SKY

BBC-sat

RTE1 RTE2

The remaining stations will be stored from programme position 9. After

completing this procedure, the ending message appears on the screen:

RTE1 RTE2

BBC1 BBC2 ITV CH4 CH5 SKY

BBC-sat

Now P1= RTE1.

If you prefer P1=BBC1, please

press P+ button.

Other any button for exit.

To make this message disappear, press any of the control buttons. If additional

channels become available(you move to another city or cable is installed) you can

restart the process previously explained. Go to the Tuning menu and select Auto

mode (see Searching channels in Auto mode on page 10). Before the TV finds any

channel, switch it off by means of the main on/off button. When you switch it on

again, the TV will begin the process previously described.

AUTO

PAL BG

P : 04

UHF

>< E23 487.25 MHz

AFT

STAND-BY

OFF:10

STAND-BY

F/OK

-/---/--

_ _

Picture effects

ÁNoise coring, enabled (ON), reduces “snow” noise on the picture.

ÁBlue Stretch, enabled (ON), increases the proportion of blue on white picture to-

nes.

ÁBlack Stretch, enabled (ON), darkens greyer areas of the screen.

ÁSkin tone: ON/OFF.

ÁColour tone. 3 colour tones can be selected: normal, "warm" or "cold" colour ran-

ges.

Picture adjustment

Colour

Sharpness

Effects

Contrast

Brightness 30

Tuning

Clock

Picture

F/OK BUTTON

It allows the sequential access to: bright, contrast, colour, definition, volume and

hue (in NTSC).

Main menu

To enter and exit the Main Menu, press the MENU button on the remote control

unit.

:toscroll upand down.

:toopen thesubmenus.

:pressto adjustthe selectedcontrol levelup ordown.

PP+

Access the Main Menu and select Clock, if the clock is not adjusted, it will only

find de Adjust option, if it is adjusted, then several different options will be found

to set the clock, alarm and timers.

Only the remote cotrol numeric buttons are valid for these functions. You must

always enter four digits when setting the time in hours and minutes (hh:mm). Any

of thefour optionsin thissubmenu canbe resetby pressingthe button.

Time Set: lets you check or set the current time, which is kept current if the TV

set is not turned off using the mains ON/OFF switch. This options also lets you

check the time information on the channel indicator.

Alarm Set: using the remote control unit numeric keys, you can set the TV

alarm function.

Time Set

Timer on

Timer off

Alarm

16:34

Picture

Tuning

Clock

PICTURE MENU

CLOCK MENU

To stop the alarm, press any button on the remote control unit, except those

marked VIDEO VCR.

Timer On: this function lets you set the time you want the TV set to turn on when

into Standby mode, using the numeric buttons of the remote control handset to

set the time.

buttons

Timer Off: this function lets you set the time you want the TV set to switch into

Standby mode, using the numeric buttons of the remote control handset to set

the time.

The television will turn itself on at the selected time. It will turn itself off

automatically if one whole hour goes by during which the remote control is not

used or if no are turned from the panel on the television set.

Time set

Timer on

Timer off

Alarm

Time set

Timer on

Timer off

Alarm

- - : - - BEEP

Time Set

Timer on

Timer off

S-VHS Video: if you have an S-VHS video cassette recorder, you will obtain

optimum picture quality by connecting it to the euroconnector with an

appropriate cable and enabling this option.

AVL: Automatic volume level, when activated it tends to keep the volume cons-

tant. It is useful when volume increases when advertising spot are on TV.

Picture

Tuning

Clock

MOREMENU

MORE MENU

CLOCKMENU

CLOCK MENU

SVHS

AVL

Child lock

16:9

TXT CharSet

SVHS

16:9

AVL

Child lock

TXT CharSet

16:9 Format . If you have a decoder, VCR or camera which uses 16:9 format, the

picture will cover the entire screen but will appear vertically stretched. This format

corrects the picture proportions.

Child lock: when enabled, it locks out all local keypad operations.

Swap

Tuning

When the mention appears, this will mean that the values of the current

programme have not been saved or stored. The mention means that the

displayed values have been saved in memory.

OK?

We may start the channel search from the submenu. As displayed on the

following chart, scroll down to the 3 option by pressing button. Where

information on the band (VLF, VHF, and UHF), channel (E23), frequency (487,25

Mhz) is

Tuning

provided, as well as Automatic frequency control (AFT), if this is

activated. The search is initiated by pressing the keys or . If you

know the number of the channel you wish to tune into, you can enter this directly

from the numerical keys on the remote control.

Begin channel search

Picture

Clock

Tuning

T U N I N G M E N U

TUNING MENU

M O R E M E N U

SVHS

AVL

Child lock ON

16:9

TXT CharSet

SVHS

AVL

Child lock

16:9

TXT CharSet

Set of TXT characters: The set of TXT characters (EAST, WEST) can be

selected. If the TXT characters don't appear correctly, try one of the options.

16:9

SVHS

AVL

Child lock

TXT Charset EAST

AUTO

PAL BG

P : 04

UHF

>< E23 487.25 MHz

AFT

247207P09.prn

E:\1 - Maria Lluisa\MANUALES\42247207\247207P09.cdr

miØrcoles, 30 de abril de 2003 15:25:38

Perfil de color: Deshabilitado

Compuesta Pantalla predeterminada

AUTO

PAL I

P : 04

UHF

OK ?

MANUAL

PAL I

P : 04

UHF

OK ?

Different modes may be selected for the search:

Searching channels in AUTO mode

The TV set automatically searches and stores all locally accessible channels.

Access the Tuningsubmenu and select the Auto option.

Once selected, scroll down to UHF option by pressing on button and follow

the steps mentioned in the previous point.

The TV set starts scanning and stores channels in the order they are found. To

change the order of stored station, use the “Channel Swapping" function on pa-

ge 11.

Searching channels in MANUAL mode

Acces the Tuningsubmenu and select the Manual option from Mode. The TV set

searches for both nearby and faraway channel signals. Once this mode has been

selected, scroll down to the 3rd optionand beginthe searchby pressing but-

ton. The Tuning indicator tells you whether you are near (<,>) or far (<<, >>)

from a channel broadcast and the direction of the search. The search stops when

a channel is found. The tuning indicator will read ><.

Searching channels in STEP mode

MANUAL

PAL I

P : 04

UHF

OK ?

Select the Step mode option and begin the search by keeping or

button pressed

The following steps for programme selection and storing in memory are the sa-

me as in the Manual option described above.

. This option is useful for tuning faraway or weak channel signals.

To select programme, scroll down to 4th optionby using button. Bypres-

sing on and buttonsor twodigits, selectthe programmenumber

in which you wish to store the tuned channel.

++P

To save in memory, scroll down to the last option and select OK with

button.

MANUAL

PAL I

P : 04

UHF

PRESETTING

STEP

PAL I

P : 04

UHF

Tabla de contenidos

Otros manuales de TELEVISOR de Sanyo

Sanyo

Sanyo C21LF37 Manual de usuario

Sanyo

Sanyo CW21CF1 Manual de usuario

Sanyo

Sanyo DP50749-02 Manual de usuario

Sanyo

Sanyo CE14AT3-C Manual de usuario

Sanyo

Sanyo CE26LC81-B Manual de usuario

Sanyo

Sanyo CZP3024TX Manual de usuario

Sanyo

Sanyo DP26746 - 26" LCD TV Manual de instrucciones

Sanyo

Sanyo DP19640 - 18.5" Diagonal LCD HDTV 720p Manual de usuario

Sanyo

Sanyo AVM-3259G Manual de usuario

Sanyo

Sanyo DS24424 Manual de usuario

Sanyo

Sanyo CZP4012 Manual de usuario

Sanyo

Sanyo DS32224 Manual de usuario

Sanyo

Sanyo AVM-1901S Manual de usuario

Sanyo

Sanyo DP37819 - 37" Diagonal FULL 1080p LCD HDTV Manual de usuario

Sanyo

Sanyo LCD-32XR1 Manual de usuario

Sanyo

Sanyo LCD-22VT11DVD Manual de usuario

Sanyo

Sanyo C21LB25S Manual de usuario

Sanyo

Sanyo DP42740 - 42"Class 720p Plasma Manual de usuario

Sanyo

Sanyo CP21AF2 Manual de usuario

Sanyo

Sanyo CP14SR1 Manual de usuario

Sanyo

Sanyo CE-25D3-C Manual de usuario

Sanyo

Sanyo CZP3012 Manual de usuario

Sanyo

Sanyo CP29EF1K Manual de usuario

Sanyo

Sanyo 28H1 Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario