Sanyo C21ZM15 Manual de usuario

Instruction Colour Model C21ZMI 5

Manual Television

Contents Warning

Warning ......................................................................... 2

Precautions ................................................................... 2

Aerial Connection ......................................................... 2

Battery installation (Remote Control Transmitter) ....... 2

Controls ........................................................................ 3

General Operation ........................................................ 4

Special Functions .......................................................... 8

Tuning of the Channels ................................................. 11

Teletext Use .................................................................. 13

Connecting other Equipment ........................................ 18

Specifications ................................................................ 20

To prevent fire or shock hazard, do not expose

the unit to rain or moisture.

High voltages are used in the operation of this

TV set. Do not remove the cabinet back from

your set. Refer servicing to qualified service

personnel.

Precautions

When the TV receiver is not to be used for an

extended period of time, it is advisable to

Electric Mains disconnect the AC power cord from the AC

outlet.

The receiver is designed to operate on an A.C. mains

SUp@)/ Of 220- 240vOkS 50 Hz.

Telescopic aerial-

(Optional extra) \Matching box

‘6

To the aerial socket I

c>,.

—

\\ \/?7’

~Telescopic aerial /

J=Ez!!L

\I/ // feeder /

Connect the cable with aplug from

aUHF (or VHF) aerial to the aerial

socket on the cabinet back.

For all aerial circuit problems please consult your

1~aerial socket dealer. local

❑Remove the battery cover by sliding.

❑Install two “AA” 1.5 volt batteries so that the “+” and “-” marks on the batteries match the “+” and “-” marks

inside the unit.

❑Close the battery cover.

Note: Replace the batteries when the TV set is showing the following symptoms:

Operation is unsteady or erratic, sometimes the TV set does not work with transmitter.

Discharged batteries may leak and damage the unit.

The normal life of batteries should be from nine to ten months.

–2–

Controls

Remote Control

Detector

Standby and Power

Indicator

Press the triangular 6Mains ON/OFF

mark to open. switch

P—M AIJTO

sTART 1

-A+ -PROG.+

$?W 4

g~:fl:E:Y/

Remote Control Transmitter

FUNCTION O—

SOUND MUTE~—

OFF TIMER @— --t-’

~RECALL

-Q LEVEL

~ALTERNATE

~Power ON/OFF

-@ TV/AV Selector

—~ NORMALIZATION

-3–

General Operation

oswitch on or off the TV; To set the TV to standby mode;

Press the Mains ON/OFF ~

button.

The power of the TV is turned on,

or off completely.

WEE’

;::+:+:+:

v’:.:.:::.: .......... ..:.:.:.:.:.:. x..

,:r’”:: ~p~A

~.~,f’~:::::::::: ~:.

............................

?!5?)(7

To turn on the TV from standby

mode;

Press @

Power ON/OFF 6Q

(remote control transmitter)

...............T......

Programme UP/DOWN@

(remote control transmitter)

Or 1to9, oKey

(remote control

transmitter)

Press the Power ON/OFF button ~

To turn on theTV, press again.

01’ -PROQ. +

Important !

Be sure to set the Mains ON/OFF switch ~to the off position, if

the power failure occurs while viewing.

IAUTO SHUT OFF

Programme

UP/DOWN @

(TV set)

This TV set incorporates the AUTO SHUT OFF function. Remaining time

Even if the TV is left on after you have gone to sleep, the TV set changes

to the standby mode within 10 minutes after all broadcasts have ended. 1

–lo

●✎●‘A CD ---O

To select aprogramme directly

Programr

Selector

Digit

For example;

‘To select aprogramme 8

.6 J8

To select aprogramme 10

-1--x

Press the Digit ~key. 1

A ’67810,:

To select aprogramme 27

-1--*

.6 =??38.

–4–

General Operation

To select achannel

Remote Control Transmitter

-Q or

P—M ,

-d+ -PROG.+

9? %# M

Front controls of the TV

Programme

UP/DOWN

●●●

To adjust the sound volume

QLEVEL

ASOUND

111111 ---------

To display the on screen indications, press the RECALL

key.

‘ALL

‘ff’imer’

Screen display disappears after

about 5seconds.

Press the ALTERNATE @key, and the programme position

alternately select the previous position and the present position, will

:.:.:.:.:+ :.:.,.,.,.,.

?HI u

-0

ALTERNATE

–5–

For example, now you are watching programme position

“4 but you watched programme position”2 previously. If

you press the ALTERNATE key, programme position “2

immediately appears.

General Operation

●B

Should you wish to mute the sound (e.g. While talking on

the telephone), press the SOUND MUTE ~key. I

4SOUND MUTE

lllil l---------

To switch the sound back on,

press SOUND MUTE key again.

The TV set will be turned off after about 30, 60, 90 or 120 minutes.

Press the OFF TIMER @key.

~OFFTIMER

I-- +1-313++0

No off timer After 30 minutes After 60 minutes

L+ I -120 -I -90

After 120 minutes After 90 minutes

To cancel the OFF TIMER

Press the OFF TIMER key until” ––” appears.

Just one minute before switching off the TV, ”–01”

and channel number will be displayed on the

screen.

This function lets you store the settings (for colour, brightness, contrast, sharpness, sound volume)in memory for both

picture and the sound, and these setting levels can be recalled by pressing the NORMALIZATION @key of the remote

control transmitter.

To store the picture and sound settings I I

(1) Set the picture and sound to the de~ired levels. —> #fi~ND etc.

-------- -

(2) Press the MEMORY/PRESETO 9button while the control function display is still visible on the screen.

NOTE: The control settings will not be saved if the MEMORY button is pressed after the control function display has

left the screen.

.,.

,.,.,.,

::::

F~; w= ‘+’

.OJ ;“ o

Press the NORMALIZATION @key. NORMAL

-->+--

-0 The colour, brightness, contrast, sharpness and

NORMALIZATION sound volume settings which you stored using the

MEMORY button are recalled.

-6–

General Operation

(1) Select the adjustment item using the FUNCTION Okey. (2) Adjust using the LEVEL @+and –key.

(Front controls of the TV)

P—M AUTO

TART ,

-d+

@~=

-PROQ.+

~@@

LEVEL

P—M AUTO

START ,

-A+

@/=

-PROG.+

●

Each time the FUNCTION ~key is pressed, function choice will change as follows;

I@COLOUR

11111111111----

Colour intensity iJ+L

Brightness Contrast

EKKQl

Display off Fine tuning Sharpness

(Operative for TV mode only)

–7–

Special Functions

You can set the special functions by inputting the special codes using the RECALL okey and the Programme Selector=

of the remote control transmitter.

S~ecial codes and s~ecial functions areas follows

;pecial Special functons

code

SP 00 Reset all special functions (The start condition for the TV power is changed to the standby start).

SP 01 Reset all special functions.

———–——

SP 30 Cancellation special code “31”. -.

—

SP 31 !Maximum volume level setting and prohibition of channel tuning function.

SP 40 Setting of the startup condition for the TV programme.(Always switched on in previous programme position)

SP 41 ~Setting of the startup condition for the TV programme. (Always switched on in programme position”1” )

SP 42 Setting of the startup condition for the TV programme. (Always switched on in programme position “2” )

SP 43 ~Setting of the startup condition for the TV programme. (Always switched on in programme position “3”)

SP 44 ~Setting of the startup condition for the TV programme. (Always switched on in programme position “4”)

SP 45 Setting of the startup condition for the TV programme. (Always switched on in programme position “5”)

SP 46 ~Setting of the startup condition for the TV programme. (Always switched on in programme position”6 )

SP 47 ~Setting of the startup condition for the TV programme. (Always switched on in programme position “7”)

SP 48 Setting of the startup condition for the TV programme. (Always switched on in programme position “8”)

SP 49 ~Setting of the startup condition for the TV programme. (Always switched on in AV mode)

SP 50 ~Change of the start condition for the TV power (Setting to the standby start). —.

SP 51 ~Change of the start condition for the TV power (Setting to the normal start),

SP 60 ~Cancellation special function 61.

SP 61 ~Suppression of the auto shut off function.

Note: Special functions are not cancelled when the power is turned off or when the AC power plug is disconnected from

the mains,

Example: To input special code “49” (The input method is the same for all the special codes.) I

(1) Press and hold the RECALL ~key for more

than 3seconds.

..........

,.:.”.”.”.”,”,”,n:;+*:::,:,:,.,”,...,.,.,.,

L-1”14

((2) Press” 4” key, next press” 9” key.

(id

o&&b

ba78

‘&Bd

‘.’.’.’.’.’.’.’Y.:.:.:.x.x:,,y.:.:.:.:.:.:.:::.......... ,.,.,

,.,.,. ,.,.,

SP4 –

SP49

(3) Press MEMORY/PRESET ~button of the TV set.

-8–

Special Functions

■When “SPO1” is input, all special functions are reset.

■When “SPOO is input, all special functions are cancelled, and the start condition for TV power is changed to the

standby start condition, meaning that the picture will not appear even when the mains ON/OFF switch ~is set at the

on position. To turn on the TV set from the standby mode, press the Power ON/OFF~,Programme UP/DOWN @or

Programme Selector ~key.

“SP31” is used to set alimit for the maximum volume level while keeping the current preset programme position in

memory.

When “SP31” is entered, the volume output at the time of entering the code is placed in the memory as the maximum

volume level. In other words, with this code it is possible to set the maximum volume at your preference. Entering this

code automatically suppresses the preset function, so that even if the preset button is pressed, the preset mode will

remain inactive.

(1)Set the disirable volume level using the LEVELQ key,

~~.’.’.’.~,,, ,,, ... ,,, ,,, ,,, ,,,, ,

LEVEL

‘m

-SOUND

11111111-----”

(2) Input “SP31”.

The volume level set in this

procedure will be memorized

as the maximum volume level.

To cancell “SP 31”, input “SP 30”.

When “SP 50” is entered, the start condition of the TV power is set to the standby start condition, meaning that the picture

will not appear even when the Mains ON/OFF switch @is set at the on position(The TV set remains in standby mode).

To return the TV’s power start condition to its original condition(normal start condition), input “SP51”.

When “SP 61” is entered, the auto shut off function is suppressed.

AUTO SHUT OFF

(Refer to page 4)

To cancell “SP61”, input “SP60”.

–9–

Special Functions

These functions can be used to change the startup condition of the TV set as follows;

When “SP40” is input When “SP41” is input When “SP42” is input

dtirl H=l 833

programme

position

The previously viewed programme

position is always selected. -

“SP46”

“SP49”

The TV will always switch on in The TV will always switch on in

programme position 1. programme position 2,

“SP44” “SP45”

,,sp47,, “SP48”

The TV will always switch on in

AV mode.

–lo–

Otros manuales para C21ZM15

Tabla de contenidos

Otros manuales de TELEVISOR de Sanyo

Sanyo

Sanyo C29LF34 Manual de usuario

Sanyo

Sanyo DP32649 - 32" LCD TV Manual de usuario

Sanyo

Sanyo C25ZG56 Manual de usuario

Sanyo

Sanyo C29ZK80TX Manual de usuario

Sanyo

Sanyo CA21FS2 Manual de usuario

Sanyo

Sanyo DS20424 Manual de usuario

Sanyo

Sanyo PDP-50XR7 Manual de usuario

Sanyo

Sanyo C29LK40S Manual de usuario

Sanyo

Sanyo C21ZM40 Manual de usuario

Sanyo

Sanyo CPP2930TX Manual de usuario

Sanyo

Sanyo DP19640 - 18.5" Diagonal LCD HDTV 720p Manual de usuario

Sanyo

Sanyo CP21SA1 Manual de usuario

Sanyo

Sanyo DS20930 Manual de usuario

Sanyo

Sanyo CE20WLD25-B Manual de usuario

Sanyo

Sanyo DP37647 - 37" Vizzon LCD TV Manual de usuario

Sanyo

Sanyo CP25ST3T Manual de usuario

Sanyo

Sanyo AVM-3660G Manual de usuario

Sanyo

Sanyo CP14SE1K Manual de usuario

Sanyo

Sanyo HT30547 Manual de usuario

Sanyo

Sanyo DS13320, DS19310 Manual de usuario

Sanyo

Sanyo CE25B5-C Manual de usuario

Sanyo

Sanyo AVM2445 Manual de usuario

Sanyo

Sanyo CP29SV2Z Manual de usuario

Sanyo

Sanyo LCD-42XF4 Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario