Santa Fe Connect Guía
3
The Santa Fe Connect is a monitoring system that allows
you to control your dehumidier. In addition, you can receive
data about water, humidity, temperature and much more in
crawl spaces and basements anytime from anywhere.
SANTA FE CONNECT
7/31/18
Santa-Fe-Products.com | 800.533.7533
Installation & Operation Instructions
Table of Contents
Specications .................................................3
Items Included.................................................3
Tools Required.................................................3
Installation ................................................ 4-10
Home View ....................................................11
Menu.............................................................12
History View ..................................................13
Alert Rules.....................................................14
Troubleshooting ............................................15
Warranty........................................................16
1-800-533-7533
www.santa-fe-products.com/santa-fe-connect
connect
3
Specications
Part Number: 4037300
Supply Voltage: 115 Volt - 1 Phase - 60 Hz
Current Draw: 0.250 Amps
Operating Temperature: 0 - 150°F, RH% accurate 32°F - 120°F
Network Cable: 2'or 25'
Water Sensor Cable: 25', 2 Conductor 22 AWG
Connectivity: Wi-Fi
Santa Fe Connect Monitor
Santa Fe Connect
Network Cable (2 Ft.)
Santa Fe Connect
Network Cable (25 Ft.)
Santa Fe Connect
Water Sensor
Santa Fe Connect Water
Sensor Cable (25 Ft.)
Hanging Screw
1
2
3
4
• Phillips Screwdriver (optional depending on install)
• Smart Phone (iPhone or Android phone)
•Homeowner’s Wi-Fi Password
Items Included
Tools Required
5
6
1
2
3
4
5
6
4
Step 1.
Download the Santa Fe Connect app from
the App Store or Google Play Store by
searching “Santa Fe Connect”.
Step 2.
Launch the Santa Fe Connect
app and enter your email and
password. Then select Sign Up.
Installation
Step 3.
Enter your account details and
select notication preferences.
Email, SMS, or both can be
selected to best meet your
notication needs. Then
select Create Account.
5
Step 4.
Launch the Santa Fe Connect app and log
in using your email address and password
that were used to create your account
(from Step 2).
Forgot your password? Click the “Forgot
Password” link and an email will be sent to
you with a temporary password and reset
instructions.
Select Log In to access your Santa Fe
Connect account. You will be prompted to
start the dehumidier installation.
Installation
Step 5.
Follow the steps in the app. First, decide
location of your Connect. Position the
Connect onto the back of your dehumidier
using the magnet on the back of the
Connect or position the Connect somewhere
within 25 feet of the dehumidier using the
hanging screw. DO NOT place the Connect
on or near the exhaust grill of the dehumidier.
Plug in your dehumidier.
If the Connect light is
blinking blue, press Yes
and proceed to Step 8.
Otherwise, press No and
proceed to Step 6.
6
Installation
Step 6.
Once the Connect light is blinking or
fading in and out, press Yes and
continue to Step 7.
If there is no light, press No and return
to Step 5.
Please Verify that your dehumidier
has power and your Connect has been
attached to your dehumidier using the
Connect network cable.
Step 7.
Locate the set up button on the side of
the Connect and insert a pen or paper clip.
Push the button gently to initiate set up.
Once the Connect light is blinking blue,
proceed to step 8 to continue with
installation.
7
Step 8.
Click on the Settings button to
continue to the phone’s WiFi settings.
Press on the Photon- network.
Once the phone links to the Connect,
a check mark will appear.
Navigate back to the Connect app.
Press Continue.
Installation
Step 9.
Select the network to which you wish
to link to. If the network you prefer does
not appear, the network could be out of
range, hidden, or 5GHz. Enter network
password if required. Press Continue.
Note 1: The Santa Fe Connect requires a
2.4GHz WiFi network, check that your
network and password match that of
your 2.4GHz network.
Note 2: An orange lock to the right of the
network indicates WEP router security.
You will need to provide a Key number,
an encryption type and the passcode
required by the router. A Red X to the right
indicates an Enterprise network which is
not supported by Connect.
8
Installation
Step 10.
The Connect will blink green rapidly
as it receives the network credentials.
The app will then wait for verication
that the Connect has linked to the
cloud. This may take up to two
minutes. When done ‘Cloud
connection successful!’ will display
on the screen. Press Continue and
proceed to step 13.
Step 11.
If the Clear WiFi Connection window
appears during the verication process,
return to Settings and disconnect from
the Photon connection and sign in to
desired WiFi.
9
Step 13.
Name your Dehumidier, provide zip
code and placement of dehumidier.
Click Done.
Installation
Step 12.
If the ‘Connection Failed’ error appears,
wait for the Connect Monitor to slowly
start fading in and out turquoise. Press
Yes and return to step 10.
If it does not turn turquoise, press No.
Read the installation tips and start the
installation again.
10
Installation
Step 14.
After saving information, a screen
conrming a successful installation
will appear. You will also see the
information you provided. Press
Finished to return HOME.
To link the Santa Fe Connect to a new WiFi network:
(These steps are necessary if the router is changed or the router password is
changed.)
• Start at Step 1 of this guide and follow the procedure like your rst time installation.
To Remove a Dehumidier from the Santa Fe Connect:
• Select the dehumidier.
• Click on Systems on the bottom bar
• Choose Release or Delete the Dehumidier
• Releasing a dehumidier will not delete its humidity history but will prevent
you from controlling or monitoring it in the future. Releasing a dehumidier
allows other Santa Fe Connect accounts to connect to it.
• Deleting a dehumidier, completely removes the dehumidier from your
app. You will no longer be able to view its humidity history not control it
from your app.
Otros manuales para Connect
1
Tabla de contenidos
Otros manuales de Instrumento de medición de Santa Fe
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario