San Jose CT-58A Manual de usuario

CT-58A
GPS/GSM Micro Tracker
Dec. 21st 2007
Version: 2.00
San Jose Navigation, Inc.
9F, No.105, Xicheng Rd., Banqiao City,
Taipei County 220, Taiwan (R. .C.).
Tel: +886-2-26879500 Fax: +886-2-26878893
E-Mail: sanav@sanav.com
Web: www.sanav.com

Content
Content.............................................................................................................................................. 2
1. Hardware Description.............................................................................................................. 3
1.1 Front Face ..........................................................................................................................3
1.2 Side Face(1) ......................................................................................................................3
1.3 Side Face(2) ......................................................................................................................4
1.4 Rear Face(Battery Cap) ................................................................................................4
1.5 Package Contents............................................................................................................5
2. Specification............................................................................................................................... 6
3. Features....................................................................................................................................... 7
4. Applications................................................................................................................................ 7
5. Setup ............................................................................................................................................ 8
5.1 Change Username...................................................................................................................9
5.2 Change Password ..................................................................................................................10
5.3 Set up the GPRS APN (Access Point Name) ...............................................................11
5.4 Set up a Host Name (URL) to Transmit Data.............................................................12
5.5 Set up the Phone Number List.........................................................................................13
5.6 Set up Auto Report...............................................................................................................14
5.7 All Parameters Reset to Default ......................................................................................15
5.8 Acquire Report of Current Position.................................................................................16
5.9 Set up E-mail Address to Receive Data........................................................................17
5.10 Set up SMTP Server...........................................................................................................18
5.11 Set up Router for Transmitting Data by URL/IP or E-mail..................................19
5.12 Request Imei Code.............................................................................................................21
5.13 Deactivate Panic mode .....................................................................................................22
5.14 Set up Panic Report ...........................................................................................................23
5.15 Set up Voice Monitoring Mode .......................................................................................24
5.16 S S Phone Setting.............................................................................................................25
5.17 Setup Geofence Coordinate............................................................................................26
5.18 Vibration Alarm Setting....................................................................................................28
5.19 Set up TCP/ UDP Address to Transmit Data.............................................................31
5.20 AGPS Update ........................................................................................................................32
6. Respond Messages ................................................................................................................ 33
6.1 Auto Report .............................................................................................................................34
6.2 Emergency Response...........................................................................................................35
6.3 Polling Response....................................................................................................................36
6.4 Vibration Response...............................................................................................................37
6.5 Geo Fencing Response ........................................................................................................38
6.6 NMEA 0183 GPRMC Sentence ..........................................................................................39
7. Warranty.................................................................................................................................... 40

1. Hardware Description
1.1 Front Face
Note:
A. Yellow light will light on while data while communicating the data to computer
B. Green light will light on while charging the CT-58A
1. Side Face(1)
LED Indications
Red: GSM status light
range: Data communication light
Blue: GPS status light
Green or Yellow: Power charging light
Power switch

1.3 Side Face( )
1.4 Rear Face(Battery Cap)
Data communication slot
Power adapter hole
I/ input slot
Use your thumb to press the battery cap
and then slide downward to open it.
Battery insert slot
SIM card insert slot

1.5 Package Contents
A.
DC Adapter Charger
B.
Cigar charger
C.
User Guide

. Specification
SPECIFICATIONS
Electrics Data
Tri Band 850/1800/1900 or 900/1800/1900 Mhz
Frequency
1575.42 Mhz
Reacquisition < 1sec.
Cold < 41 sec. TTFF(Time To First Fix)
Warm < 33 sec. TTFF
Hot < 3.5 sec. TTFF
GPS Receiver Acquisition time
Support A-GPS services
Power
Battery Power 3.7V DC Li-Ion Battery,1500mA (future version Li-ion polymer battery )
External Power 6V DC
Battery Life 40 hours (estimated)
Environmental Conditions
Operating Temperature -20°C to +70°C
Storage Temperature -25°C to +75°C
Relative Humidity 5% to 95 %, non-condensing
Mechanics Data
Size 8.4(L) x 6.4(W) x 2.3(H) cm
Weight 104g with battery

3. Features
A. Panic(option)
External panic button (option) can be connected to CT-58A. When panic button is pressed, CT-58A will
send out S S report.
B. Auto Report
You can set up auto report function to receive a regular report, and note that the default setup is off.
Please refer to chapter 5.6 for detailed information.
C. Vibration Sensor Built-in
The vibration sensor is embedded in CT-58A tracker. When the sudden movement cases vibration,
CT-58A will send the alarm report
4. Applications
1. Fleet management 4. Yachting watching
2. Vehicle security and recovery 5. Covert tracking
3. Assert tracking
Upload messages to URL via GPRS. (The default report
frequency is a message every 60 seconds for 60 times)
Send the SMS report to the phone number in the
phonebook if the
report router is defined to send the message via SMS
No
GPRS
GPRS
comes
Press Panic
Dial the S S phone number if
this number is defined
(please refer to chapter 5.20)

5. Setup
CT-58A currently provides 13 commands for setup. You can setup the CT-58A by following the instructions shown
in this chapter via SMS from a cellular phone. Key the specific SMS message in your cellular phone as the
instruction and send it to the SIM number of CT-58A. The setup messages are showed in the following sections.
Note1: The default settings are shown as below.
a. Default CT-58A ID is “username”, and please read Chapter 5.1 in order to change the ID.
b. Default password is “0000”, and please read Chapter 5.2 in order to change the password.
c. There’s no number in the default
contact, and please read Chapter 5.5 in order to add the phone
number.
d.
Default setting of Auto Report is deactivated, and please read Chapter 5.6 in order to setup the auto
regular report.
e. Default setting of APN is only suitable for Taiwan GSM netw
ork and please read Chapter 5.3 in order
to change the APN.
f. Default setting of IP/domain is http://www.sanav.com/eric-gga/gprs.aspx
and please read
Chapter 5.4 in order to change the IP/domain.
g. Please be aware of the upper and lower cases when you send the SMS command to CT-58A.
Note2: Before doing any setup, please ensure CT-58A
is connected with the GSM network. The red LED must
lights on. And please note that CT-58A must not be under Panic mode.
Note3: While you are keying in any setup message, note that N space is allowed between the characters in
the SMS. Characters can be letters, commas or any signs.
Note4: Any setup message must be started with a “#” sign and ended up with a “*” sign.
Note5: nly when the password, username and setup message are correct, the CT-58A
will update information
according to user’s definition. If the command is not valid, a failure report is going to be sent to the
commander cell phone.

5.1 Change Username
You can change the ID of CT-58A by below command format. No space is allowed between the
characters. For example, if you send the SMS message shown in the example below to the CT-58A, you
will change the ID from “username” to “ason”
Setup format
#「username」,「Password」,「Function Code」,「New username」*
Example:#username,0000,1,ason*
The table 5.1.1 describes the meaning of each segment in the message above.
Table 5.1.1
The table 5.1.2 shows each confirmation message reply after setup
Table 5.1.2
Text Keyed In SMS Description
# Start sign.
username Default ID of CT-58A
0000 Default password.
If you have changed the password, please use the updated one.
1 Mode 1 defines the ID setup
Ason New ID defined by the owner.
At the maximum of 8 letters.
* End sign.
Situation Message Reply
Setup Succeeds [username] + CT-58A username is updated.
Setup Fail [username] + CT-58A username setup fail!
Incorrect password [username] + Password setup Fail!
Incorrect username or command
format [username] + command error
CT-58A is in Emergency Mode [username] + in emergency, changing username is not allowed.

5. Change Password
Use this SMS message example shown below to change the password of CT-58A. For example, by
following the example below, you will change the default password, “0000” to a new password, “1111”.
Setup format
#「username」,「Password」,「Function Code」,「new Password」,「new Password」*
Example:#username,0000,2,1111,1111*
The table 5.2.1 describes the meaning of each segment in the message above.
Table5.2.1
The table 5.2.2 shows each confirmation message reply after setup
Table 5.2.2
Text Keyed In SMS Description
# Start sign.
username Default ID of CT-58A.
If you have changed the username, please use the updated one.
0000 Default password.
If you have changed the password, please use the updated one.
2 Mode 2 defines to change the password
1111 New password
1111 Reconfirm the password
* End sign.
Situation Message Reply
Setup Succeeds [username] + CT-58A101 Password is updated.
Setup Fail [username] + Password setup Fail!
Incorrect password [username] + Password setup Fail!
Incorrect username or SMS
format [username] + command error
CT-58A is in Emergency Mode
[username] + in emergency, changing password is not allowed.
Tabla de contenidos
Otros manuales de GPS de San Jose


















