San Jose Navigation CT-58 Manual de usuario
CT-58
GPS/GSM Micro Tracker
May. 23 2008
Version: 1.20
San Jose Navigation, Inc.
9F, No.105, Xicheng Rd., Banqiao City,
Taipei County 220, Taiwan (R. .C.).
Tel: +886-2-26879500 Fax: +886-2-26878893
E-Mail: sanan@sanav.com
Web: www.sanav.com
Content
1. Hardware Description..............................................................................................................3
1.1 Front Face.....................................................................................................................3
1.2 Side Face(1) ................................................................................................................3
1.3 Side Face(2) ................................................................................................................4
1.4 Rear Face(Battery Cap)...........................................................................................4
1.5 Package Contents......................................................................................................5
2. Specification...............................................................................................................................6
3. Features.......................................................................................................................................7
4. Setup ............................................................................................................................................8
4.1 Change Username.........................................................................................................9
4.2 Change Password ........................................................................................................10
4.3 Set up the GPRS APN (Access Point Name)...................................................... 11
4.4 Set up a Host Name (URL) to Transmit Data ...................................................12
4.5 Set up the Phone Number List ...............................................................................13
4.6 Set up Auto Report .....................................................................................................14
4.7 All Parameters Reset to Default.............................................................................16
4.8 Acquire Report of Current Position .......................................................................17
4.9 Set up E-mail Address to Receive Data..............................................................18
4.10 Set up SMTP Server.................................................................................................19
4.11 Set up Router for Transmitting Data by URL/IP or E-mail........................20
4.12 Request Imei Code ...................................................................................................22
4.13 Deactivate Panic mode ...........................................................................................23
4.14 Setup Geofence Coordinate ..................................................................................24
4.15 Set up Voice Monitoring Mode .............................................................................26
4.16 Vibration Setting .......................................................................................................27
4.17 S S Phone Setting ...................................................................................................28
4.18 Activate/Deactivate Park Function .....................................................................30
4.19 Set up TCP/ UDP Address to Transmit Data...................................................32
4.20 Set up Panic Report..................................................................................................33
4.21 perate Log Function ..............................................................................................34
4.22 Define Log Interval...................................................................................................35
4.23 Erase the Logged Data ...........................................................................................38
5. Respond Messages ................................................................................................................39
5.1 utput Format When The Router Is Set to HTTP, E-mail, TCP or UDP...40
5.2 utput Format when The Router Is Set to SMS..............................................41
5.3 NMEA 0183 GPRMC Sentence.................................................................................42
6. Warranty....................................................................................................................................43
1. Hardware Description
1.1 Front Face
Note:
A. Yellow light will light on while data while communicating the data to computer
B. Green light will light on while charging the CT-58
1.2 Side Face 1)
LED Indications
Red: GSM status light
range: Data communication light
Blue: GPS status light
Green or Yellow:: Power charging light
Power switch
1.3 Side Face 2)
1.4 Rear Face Battery Cap)
Data communication slot
Power adapter hole
I/ input slot
Use your thumb to press the battery cap
and then slide downward to open it.
Battery insert slot
SIM card insert slot
1.5 Package Contents
A.
DC Adapter Charger
B.
Cigar charger
C.
User Guide
2. Specification
SPECIFICATIONS
Electrics Data
Tri Band 850/1800/1900 or 900/1800/1900 Mhz
Frequency
1575.42 Mhz
Reacquisition < 2sec.
Cold < 60sec. TTFF(Time To First Fix)
Warm < 35 sec. TTFF
GPS Receiver Acquisition time
Hot < 10sec. TTFF
Flash 32MB
Power
Battery Power 3.7V DC Li-Ion Battery,1500mA (future version Li-ion polymer battery )
External Power 6V DC
Battery Life 70-75 hours(1 hour per data)
Environmental Conditions
Operating Temperature -20°C to +70°C
Storage Temperature -25°C to +75°C
Relative Humidity 5% to 95 %, non-condensing
Mechanics Data
Size 8.4(L) x 6.4(W) x 2.3(H) cm
Weight 104g with battery
3. Features
A. Build-in vibration sensor
The built-in vibration sensor will detect the movement of the CT-58. When movement is occurs,
CT-58 will send out reports.
B. Panic option)
External panic button (option) can be connected to CT-58. When panic button is pressed, CT-58
will send out S S report.
C. Auto Report
You can set up auto report function to receive a regular report, and note that the default setup is
off. Please refer to chapter 5.6 for detailed information.
4. Applications
1. Fleet management
2. Vehicle security and recovery
3. Assert tracking
4. Yachting watching
5. Covert tracking
Press Panic
Upload messages to URL via GPRS. (The default report frequency is a
message every 60 seconds for 60 times)
No
GPRS
GPRS
comes back
Send the SMS to the first number in the phonebook instead
4. Setup
CT-58 currently provides 13 commands for setup. You can setup the CT-58 by following the instructions
shown in this chapter via SMS from a cellular phone. Key the specific SMS message in your cellular phone as
the instruction and send it to the SIM number of CT-58. The setup messages are showed in the following
sections.
Note1: The default settings are shown as below.
a. Default CT-58 ID is “username”, and please read Chapter 5.1 in order to change the ID.
b. Default password is “0000”, and please read Chapter 5.2 in order to change the password.
c. There’s no number in the default
contact, and please read Chapter 5.5 in order to add the phone
number.
d. Default setting of Auto Report is deactiva
ted, and please read Chapter 5.6 in order to setup the auto
regular report.
e.
Default setting of APN is only suitable for Taiwan GSM network and please read Chapter 5.3 in order
to change the APN.
f. Default setting of IP/domain is http://www.sanav.com/eric-gga/gprs.aspx
and please read
Chapter 5.4 in order to change the IP/domain.
g. Please be aware of the upper and lower cases when you send the SMS command to CT-58.
Note2: Before doing any setup, please ensure CT-58 is connected with the GSM network. The red LED must
lights on. And please note that CT-58 must not be under Panic mode.
Note3: While you are keying in any setup message, note that N space is allowed between the characters in
the SMS. Characters can be letters, commas or any signs.
Note4: Any setup message must be started with a “#” sign and ended up with a “*” sign.
Note5: nly when the password, username and setup message are correct, the CT-58
will update information
according to user’s definition. If the command is not valid, a failure report is going to be sent to the
commander cell phone.
4.1 Change Username
You can change the ID of CT-58 by below command format. No space is allowed between the
characters. For example, if you send the SMS message shown in the example below to the CT-58,
you will change the ID from “username” to “ason”
Setup format
＃「username」,「Password」,「Function Code」,「New username」＊
Example：＃username,0000,1,ason＊
The table 4.1.1 describes the meaning of each segment in the message above.
Table 4.1.1
The table 4.1.2 shows each confirmation message reply after setup
Table 4.1.2
Text Keyed In SMS Description
# Start sign.
username Default ID of CT-58
0000 Default password.
If you have changed the password, please use the updated one.
1 Mode 1 defines the ID setup
Ason New ID defined by the owner.
At the maximum of 8 letters.
* End sign.
Situation Message Reply
Setup Succeeds [username] + CT-58 username is updated.
Setup Fail [username] + CT-58 username setup fail!
Incorrect password [username] + Password setup Fail!
Incorrect username or command
format [username] + command error
CT-58 is in Emergency Mode [username] + in emergency, changing username is not allowed.
4.2 Change Password
Use this SMS message example shown below to change the password of CT-58. For example, by
following the example below, you will change the default password, “0000” to a new password,
“1111”.
Setup format
＃「username」,「Password」,「Function Code」,「new Password」,「new Password」＊
Example：＃username,0000,2,1111,1111＊
The table 4.2.1 describes the meaning of each segment in the message above.
Table 4.2.1
The table 4.2.2 shows each confirmation message reply after setup
Table 4.2.2
Text Keyed In SMS Description
# Start sign.
username Default ID of CT-58.
If you have changed the username, please use the updated one.
0000 Default password.
If you have changed the password, please use the updated one.
2 Mode 2 defines to change the password
1111 New password
1111 Reconfirm the password
* End sign.
Situation Message Reply
Setup Succeeds [username] + GC101 Password is updated.
Setup Fail [username] + Password setup Fail!
Incorrect password [username] + Password setup Fail!
Incorrect username or SMS
format [username] + command error
CT-58 is in Emergency Mode
[username] + in emergency, changing password is not allowed.
Tabla de contenidos
Otros manuales de GPS de San Jose Navigation
